Owner's Manual

57
En
Zone 2
In addition to the main listening room, you can also enjoy playback in another room, which we call Zone 2. For either of
the rooms, you can specify a different input source.
Connecting the Zone Speakers to an
Additional Amplifier
This setup allows 5.1-channel playback in your main
listening room and 2-channel stereo playback in Zone 2.
Note
• With the default settings, the Zone 2 volume must be set on the
Zone 2 amp. If your Zone 2 amp has no volume control, set the
“Zone 2 Out” setting to “Variable” so that you can set the Zone
2 volume on the AV receiver.
See “Multi Zone” (➔ page 52).
■ Operating on the AV receiver
■ Operating on the remote controller
To control Zone 2, you must press Zone2 on the remote
controller first.
Making Zone 2 Connections
Setting the Zone 2 Out
R
L
IN
Main room
TV
Zone 2
AV receiver
Receiver/
integrated amp
Controlling Zone 2 Components
1
To turn on Zone 2 and select an input source, press
Zone 2 followed by an input selector button within
8 seconds.
Zone 2 turns on, the Z2 indicator lights on the display.
To select AM or FM, press the Tuner input selector
button repeatedly.
To select the same source as the main room’s, press
Zone 2 repeatedly until “Z2 Selector: Source”
appears on the display.
To turn off Zone 2, press Off.
The zone is turned off.
1
Press Zone2 and then press 8Receiver.
Zone 2 turns on, the Z2 indicator lights on the display.
2
To select an input source for Zone 2, press Zone2,
followed by an input selector button.
To select AM or FM, press the Tuner input selector
repeatedly.
Note
• You cannot select different AM or FM radio stations for
your main room and Zone 2. The same AM/FM radio
station will be heard in each room.
3
To turn off Zone 2, press Zone2 followed by
8Receiver.
Input selector buttons
Zone 2
Off
Zone 2 Level q/w
Tone
+, –
Input selector buttons
8Receiver
Zone2
Muting
VOL q/w