Owner's Manual

Turning On & Basic Operations

En-40

You can temporarily mute the output of the AV receiver.

Muting the AV Receiver

Press Receiver followed by Muting.

The output is muted and the MUTING indicator

flashes on the AV receiver’s display.

Tip

• To unmute, press Muting again or adjust the volume.

• Muting is automatically cancelled when the AV receiver is

set to standby.

Using Headphones

Connect a pair of stereo headphones with a

standard plug (1/4 inch or 6.3 mm) to the Phones

jack.

While the headphones plug is inserted in the Phones

jack, = indicator lights.

Note

• Always turn down the volume before connecting your

headphones.

• While the headphones plug is inserted in the Phones jack,

the speakers are turned off.

• When you connect a pair of headphones, the listening mode

is set to Stereo, unless it’s already set to Stereo, Mono, or

Direct.

• If you connect an iPod or iPhone to the USB port on the AV

receiver, no sound will be output from the headphones jack.