DTR-30.6 Advanced Manual Contents AM/FM Radio Receiving Function Tuning into a Radio Station Registering an AM/FM Radio Station Using RDS (Australian model) 2 2 2 3 Playing Content from a USB Storage Device 4 Listening to Internet Radio 5 About Internet Radio 5 TuneIn 5 Pandora®–Getting Started (U.S.
AM/FM Radio Receiving Function Tuning into stations manually AM/FM Radio Receiving Function Tuning into a Radio Station Tuning into stations automatically 1. Press Tuner on the main unit several times to select either "AM" or "FM". 2. Press Tuning Mode so that the "AUTO" indicator on the display goes off. 1. Press Tuner on the main unit several times to select either "AM" or "FM". 3. Press Tuning 2. Press Tuning Mode so that the "AUTO" indicator on the display stays lit.
AM/FM Radio Receiving Function 3. Press Preset several times to select a number between 1 and 40 while the preset number is flashing (about 8 seconds). 2. Press and hold Memory on the main unit and press Tuning Mode to delete the preset number. • When deleted, the number on the display goes off. Using RDS (Australian model) 4. Press Memory again to register the station. • When the station is registered, the preset number stops flashing.
AM/FM Radio Receiving Function / Playing Content from a USB Storage Device Oldies (Oldies music) Folk M (Folk music) Document (Documentary) 3. Press Enter to search the radio stations of the selected type. 4. When such a radio station is found, the indication on the display flashes. Then, press Enter again. • If no stations are found, the message "Not Found" is displayed. 2.
Listening to Internet Radio Listening to Internet Radio About Internet Radio Internet radio, also called net radio, web radio or streaming radio, is an audio service accessible at the websites of service providers who distribute music and audio programs in digital format. There are numerous websites all over the world, from terrestrial station, special station to personal website that provide such a service.
Listening to Internet Radio • If you associate the device on My Page within the TuneIn website using the registration code obtained by selecting "Login" - "Login with a registration code" on the unit, you can log in without entering the user name and password. Pandora®–Getting Started (U.S., Australia and New Zealand only) Playing Back Create a New Station 1.
Listening to Internet Radio SiriusXM Internet Radio (North American only) Playing Back If you want to listen to the service, you must subscribe. To subscribe go to www.siriusxm.com/internetradio with your computer. When you subscribe, you will be provided with a username and password which has to be entered into the AV receiver. To use SiriusXM Internet Radio, you must have your AV receiver connected to the Internet. Using the remote control, follow these steps: 1.
Listening to Internet Radio Slacker Personal Radio (North American only) Operation: You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press Enter to confirm your selection. To return to the previous screen, press Return. Playing Back 1. Press NET on the remote controller to display NET TOP screen.
Listening to Internet Radio Registering Other Internet Radios Registering a Station Registering a Station with PC To listen to other Internet radio program, register the program in the "My Favorites" list on the NET TOP screen as described below. The unit supports Internet radio stations stored in the following formats: PLS (URL ending in .pls), M3U (URL ending in .m3u) and RSS (URL ending in rss/rdf/xml). • You can register up to 40 Internet radio stations.
Listening to Internet Radio To rename the registered radio station: While the radio station is being played or when it is selected from the "My Favorites" list, press Menu to display the menu screen. Select "Rename this station" with the cursors and press Enter to display the keyboard screen. Rename the station as desired. • Radio stations can be renamed also from "WEB Setup". 3. Select the radio station with the cursors to delete and press Menu to display the menu screen.
DLNA Music Streaming DLNA Music Streaming • With Windows Media Player 12 Remote Playback function, you can stream music files stored on your PC to the unit by operating the PC.
DLNA Music Streaming / Music Streaming from a Shared Folder • The unit cannot access pictures and videos stored on servers. • Contents stored on the server may not be displayed depending on the server sharing settings. 5. With the cursors, select the music file to play, and then press Enter or to start playback. • If "No Item" is displayed, check whether the network is properly connected. 4. Select this unit in "Media streaming options" and check that it is set to "Allow". 5.
Music Streaming from a Shared Folder Setting PC Playing from a Shared Folder 2. Select "Home Media" with the cursors and then press Configuring the Sharing Options Operation: You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press Enter to confirm your selection. To return to the previous screen, press Return. 3.
Using Remote Controller for Playing Music Files Using Remote Controller for Playing Music Files 5 1 6 2 7 About the Remote Controller The remote controller of this unit allows you to play music files stored on USB storage devices, Internet radio, PCs and NAS devices on your home network, as well as on Bluetooth-enabled devices. It also allows you to view information of the music file being played and perform various other operations.
Using the Listening Modes MOVIE/TV button Using the Listening Modes Selecting Listening Mode The listening modes allow you to select the best sound effect for your input source. 1. Press RCV on the remote controller. • Always press RCV first to change the remote controller to Receiver mode (the mode to operate this unit) since its mode may be changed to operate another component. 2. Press one of the following buttons depending on your choice from among the four listening modes.
Using the Listening Modes STEREO button Dolby D + (Dolby Digital Plus) You can select a listening mode for stereo and all channel stereo sources. • Selectable listening modes: All Ch Stereo Stereo This mode is for use with Dolby Digital Plus sources. The audio from the input source is output as-is, without surround sound processing. • Input source: 5.1 ch, 7.1 ch • Speaker configuration: 3.1 ch, 5.1 ch, 7.
Using the Listening Modes • Input source: 5.1 ch • Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch • Depending on the settings, this listening mode becomes DTS. • This listening mode can be selected only if your Blu-ray Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream. DTS Express This mode is for use with DTS Express sources. The audio from the input source is output as-is, without surround sound processing. • Input source: 5.
Using the Listening Modes surround sound processing. • Input source: 5.1 ch, 7.1 ch • Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch Orchestra Suitable for classical or operatic music, This mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverberation of a large hall. • Input source: MONO, STEREO, 5.1 ch, 7.1 ch • Speaker configuration: 5.1 ch, 7.
Advanced Settings 4. Press / to select the desired menu, and then press Operation Advanced Settings 1. Press RCV on the remote controller. • Always press RCV first to change the remote controller to Receiver mode (the mode to operate this unit) since its mode may be changed to operate another component. Enter. SETUP 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input How to Set 4. Composite Video Input 5.
Advanced Settings 1.Input/Output Assign Setting Item Resolution Monitor Out The video input signals input to the unit will be converted when they are output from the HDMI OUT jack to the TV so that their resolution can match that of the TV used. Setting Item Default Value Setting Details Monitor Out MAIN Select the HDMI jack to be connected with the TV.
Advanced Settings HDMI Input Component Video Input It is possible to change assignment of input selector buttons and the HDMI IN jacks. CBL/SAT button is assigned to COMPONENT VIDEO IN jack as factory default setting. This assignment can be changed if necessary. If you do not assign a jack, select "-----". Setting Item Default Value Setting Details BD/DVD HDMI 1 "HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to BD/DVD button. If you do not assign a jack, select "-----".
Advanced Settings Composite Video Input Digital Audio Input It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO IN V1 to 3 jacks. It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL 1 to 2/OPTICAL jacks. Setting Item Default Value Setting Details Setting Item Default Value Setting Details BD/DVD ----- "VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to BD/DVD button.
Advanced Settings 2.Speaker Setup Speaker Configuration Allows you to change the speaker configuration such as presence or not of subwoofer, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup. Furthermore, this setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. Allows you to change the speaker configuration such as presence or not of each speaker, crossover frequency, and so on.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details Back 100Hz Select the crossover frequency from "40Hz" to "200Hz" to start outputting bass frequencies for each channel. "Full Band": Full band will be output. "None": When no compatible speaker is connected • In the following cases, the setting will be set to "None": – "Surround" is set to "None". – "Front Speakers Type" is set to "Bi-Amp".
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details Subwoofer 12.0 ft/3.60 m Specify the distance between each speaker and the listening position. Subwoofer 0 dB Height Left 9.0 ft/2.70 m Specify the distance between each speaker and the listening position. Select a value between "-15 dB" to "+12 dB". A test tone will be output each time you change the value. Select the desired level. Height Left 0 dB Height Right 9.0 ft/2.
Advanced Settings Dolby Setting Item Default Value Setting Details Make the settings for Dolby listening mode. Dolby EX Dolby EX Manual The Dolby Digital EX listening mode will automatically be selected when Dolby EX signals are input. "Auto": Use this function "Manual": Select the desired listening mode • The setting cannot be changed if "Back" is set to "None" in "Speaker Configuration".
Advanced Settings 4.Source Setup Name Edit Adjust the volume level difference among the multiple devices connected to this unit, rename an input selector, or adjust the image quality. The setting can be separately set to each input selector button. When you select a desired input to check the video or audio, start playback of the connected device.
Advanced Settings Picture Adjust Setting Item Default Value Setting Details Adjust the image quality. (Possible only when the video player is connected to the HDMI OUT MAIN jack) If you adjust it by checking the video, press Enter. Press Return to return the screen to the previous status. Picture Mode Custom An appropriate image quality setting for cinema or game can be selected. You can also adjust each item to obtain your favorite image quality.
Advanced Settings Setting Item Edge Enhancement Default Value Setting Details Off Adjust the sharpness of the outline of image. Select from "Off", "Low", "Mid" (Middle), and "High". • The setting will be fixed to "Off" if "Game Mode" is set to "On". • When the horizontal resolution of the output video is 2,000 TV lines or more, this setting is set to "Off". Noise Reduction Off Reduces the noise of the screen. Select from "Off", "Low", "Mid" (Middle), and "High".
Advanced Settings Audio Selector 5.Listening Mode Preset Make the audio input setting. The setting can be separately set to each input selector button. Select the input selector to configure. Setting Item Default Value Setting Details Audio Selector – Allows you to select prior input source. "ARC": When giving priority to input signal from ARC compatible TV. • The setting can be selected only when "Audio Return Channel" is set to "Auto" and also the "TV/CD" input is selected.
Advanced Settings 6.Miscellaneous 12V Trigger A Setup Volume Setup You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. When the desired input is selected, power link operation will be activated with a control signal of maximum 12 V/150 mA output from the 12V trigger output jack. Make the detailed volume setting of the unit.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details STB/DVR Main Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details USB Main Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details PC Main/Zone2 Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings 12V Trigger C Setup Setting Item Default Value Setting Details You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. When the desired input is selected, power link operation will be activated with a control signal of maximum 12 V/25 mA output from the 12V trigger output jack. STB/DVR Zone2 Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details TV/CD Zone2 Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings 7.Hardware Setup HDMI Multi Zone Setting Item Default Value Setting Details Zone 2 Out Fixed Select which of the integrated amplifier in a separate room or this unit should be used to adjust the volume when Zone 2 is active. "Fixed": Adjust on the Integrated amplifier in a separate room "Variable": Adjust on the unit Zone 2 Maximum Volume Off Set the maximum value for Zone 2 to avoid too high volume. Select a value from "Off", "50" to "99".
Advanced Settings Setting Item Default Value Setting Details Setting Item HDMI Through Off You can display the video of an HDMI connected player on the TV even if the unit is in standby mode. This setting is effective only for an input selector to which an HDMI jack is assigned in "HDMI Input". It cannot be set to any other input selector unless an HDMI jack is assigned to it. "Off": The setting is disabled. Video of device connected to any jack will not be displayed.
Advanced Settings Setting Item Default Value Setting Details Audio TV Out (SUB) Off You can enjoy audio through the speakers of the HDMI connected TV while this unit is on. "On": Use this function "Off": Do not use this function • Listening mode cannot be changed while "Audio TV Out (SUB)" is set to "On" and audio is being output through the speakers of the TV.
Advanced Settings Network Setting Item Default Value Setting Details Make the network setting. • When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable" and assign an address to this unit in "IP Address" as well as set information related to your LAN, such as Subnet Mask and Gateway.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details Auto Reconnect On This function automatically reconnects to the Bluetooth-enabled device connected last when you change the input selector to "BLUETOOTH". "On": Use this function "Off": Do not use this function • This function may not work depending on your Bluetooth-enabled device. Status – Displays the status of the Bluetooth-enabled device connected to the unit.
Advanced Settings 8.Remote Controller Setup Setting Item Default Value Setting Details Remote ID 1 Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Integra/Onkyo components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure. 1. While holding down RCV, press Q Setup for about 3 seconds until the remote indicator stays lit. 2.
Operating Other Components Using Remote Controller 1. Press RCV and then press Home on the remote Operating Other Components Using Remote Controller controller. Functions of Remote Mode Buttons You can control any other device than this unit by programming a specified remote control code to a Remote Mode button of the remote controller. Register a remote control code to a desired Remote Mode button and press it to enter the remote mode that allows you to operate the corresponding device.
Operating Other Components Using Remote Controller 3. With the number buttons, enter the 5-digit remote control code within 30 seconds. • The registration is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when registering the remote control code fails. Try the registration again. once slowly when registering the remote control code fails. Try the registration again. • Pressing any other button than a colored button cancels the remap operation.
Operating Other Components Using Remote Controller VCR/PVR Operation G H 5 8 6 7 9 F I J , , , , , , () G H A (Red), B (Green), C (Yellow), D (Blue) I Number 1 to 9, 0, +10 J CLR, Display ¼¼ Not CEC-compatible.
Operating Other Components Using Remote Controller CD Player Operation F 5 8 6 7 9 F G H , , , , , F G Number 1 to 9, 0, +10 H CLR, Display , 5 Guide 6 / / / , Enter 7 Setup 8 PREV CH 9 Return F Audio Satellite Receiver/Cable Receiver Operation G Press the Remote Mode button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons.
Operating Other Components Using Remote Controller To Operate CEC-compatible Components 7 The TV and BD/DVD buttons on the remote controller are preprogrammed with remote control codes for linked operation of some CEC (Consumer Electronics Control)compatible TV sets and Blu-ray Disk players. By connecting to the unit via HDMI, you may operate them using the AV receiver's remote controller.
Advanced Speaker Connection 2 Select "Setup" with the cursors and press Enter. 3 With the cursors, select "2.Speaker Setup" - Advanced Speaker Connection "Speaker Settings" - "Front Speakers Type". 4 Select "Bi-Amp" with the cursors. • Before bi-amping, be sure to remove the shortcircuit connector that connects the tweeter (treble) terminal and the woofer (bass) terminal. • Use speakers supporting bi-amping only. For details, refer to the speakers' instruction manual.
Connecting and Operating Onkyo RI Components Connecting and Operating Onkyo RI Components RI Connection and Setting About RI Function • The remote indicator stays lit. • The RCV, Zone2, and TV buttons cannot be programmed. L Connecting an Onkyo component with RI jack such as the separately sold RI Dock to the unit by using an RI cable and an analog audio (RCA) cable enables the following RI functions: R 2.
Connecting and Operating Onkyo RI Components iPod/iPhone Operation The RI Dock allows you to use the AV receiver's remote controller to operate and play music on your iPod/iPhone. Moreover, it also allows you to view videos on your iPod/ iPhone on the screen of your TV, as well as perform RI operations if connected via RI. This operation is possible only when the RI remote control code is programmed.
Control Function between the Unit and External Component Control Function between the Unit and External Component You can enable the control functions between the unit and external devices using the terminals below. Special devices or cable connections are necessary to enable the functions. For more information about preparation, contact the specialized stores.
Firmware Update Updating the Firmware via Network Firmware Update About Firmware Update There are two methods for updating the firmware: via network and via USB. Use the one that best suits your environment. • For the latest information on updates, visit the Integra website. • Before updating, make sure that the speaker setup microphone is not connected.
Firmware Update If an Error Message is Displayed Updating the Firmware via USB Case 1: When an error occurs, "- Error!" is appeared on the display of the unit. ("" represents an alphanumeric character.) Check the following: Before Start: Error Code • -01, -10: Ethernet cable not found. Connect the Ethernet cable properly. • -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20, -21: Internet connection error.
Firmware Update The Home menu is displayed on the TV screen. Case 1: When an error occurs, "- Error!" is appeared on the display of the unit. ("" represents an alphanumeric character.) Check the following: HOME Setup 7. With the cursors, select "Setup" - "7.Hardware Setup" "Firmware Update" - "Update via USB", and then press Enter. • If "7.Hardware Setup" is grayed out and cannot be selected, wait for a while until it starts up.
Troubleshooting How to reset the remote controller Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Troubleshooting Only the center speaker produces sound • If you use the Dolby Pro Logic II listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker. • Make sure the speakers are configured correctly. The surround speakers produce no sound • When the T-D (Theater-Dimensional), Stereo or Mono listening mode is selected, the surround speakers produce no sound.
Troubleshooting There is no picture from a source connected to an HDMI IN • Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported. • Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not support the resolution of the video input from the player. Change the setting on the player.
Troubleshooting iPod/iPhone does not work properly • Try reconnecting your iPod/iPhone. Multi-zone Function There is no sound • With multi-zone function, sound is output only when the signal input source is an external component connected to the analog audio input jacks of the unit, "NET", "USB" or "BLUETOOTH". Multi-zone playback is not possible if the player and the unit are connected via HDMI cable or digital cable.
Troubleshooting The Auto Reconnect function of Bluetooth does not work • This may not work with some Bluetooth-enabled devices. In that case, pair the unit and the Bluetoothenabled device and then play again NET/USB Function Cannot access the network server • When NET is blinking, the AV receiver is not properly connected to the home network. • Make sure your network server has been started up. • Make sure your network server is properly connected to the home network.
Troubleshooting The picture on your TV/monitor connected to the HDMI output(s) is unstable • Try turning the DeepColor function off. To turn off the DeepColor function, press STB/DVR and On/Standby on the AV receiver simultaneously. While holding down STB/DVR, press On/Standby several times until "Deep Color: Off" appears on the display. To reactivate the DeepColor function, repeat the above described step until "Deep Color: On" appears on the display. Radio Wave Caution The AV receiver uses a 2.
Troubleshooting Regarding the Video Resolution See below the video signal types and resolutions that the unit can output when it receives the input signals of the following types and resolutions. The supported resolutions are shown as "Input: Output".
Reference Information Reference Information Linked Operation with CEC-compatible Components The AV receiver is compatible with the following components (as of January 2014).
Reference Information About Copyright Protection: The unit supports Revision 1.4 and Revision 2.2 (HDMI OUT MAIN and HDMI IN3 only) of the HDCP (Highbandwidth Digital Content Protection) (2), a copyprotection system for digital video signals. Other devices connected to the unit must also support HDCP. 1 DVI (Digital Visual Interface): The digital display interface standard set by the DDWG (3) in 1999.
Reference Information Server Requirements Server playback This unit can play digital music files stored on a PC or media server and supports the following technologies: • Windows Media Player 11 • Windows Media Player 12 • DLNA-certified media server The network server must be connected to the same network as this unit. Up to 20,000 folders can be displayed, and folders may be nested up to 16 levels deep.
Reference Information AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP or .3G2) • Supported formats: MPEG-2/MPEG-4 Audio • Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz • Supported bitrates: Between 8 kbps and 320 kbps, and VBR FLAC (.flac or .FLAC) FLAC is a file format for lossless audio data compression. • Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.
Reference Information Remote Control Code List ■■Television (A to E) A.R.
Reference Information ESA Euroman Europa Europhon Evesham Technology Excello Exquisit 10171 10037 10037 10037 11667 11037 10037 Genesis Genexxa GFM Gibralter Gibson Gintai Godrej GoGen GoldStar 12676 11585 10625, 11037, 10037, 10195, 11585, 12676 10037, 10171 10208 11667, 10714, 12676, 10037, 10556 10714, 10037, 11037, 10208, 10556 10208 10037 10037 10037 11636 10037 11826 10809 10809 13817, 10171, 11394, 11037, 10714 11037 10037 10037 11755 11447, 10178, 10625, 11454 10037 Goodmans ■■Television (F to
Reference Information LG LiesenKotter Lifetec Linetech Linsar Local India Brand Local Malaysia Brand Lodos Loewe Logik Luma Lumatron Lumenio Lux May Luxor LXI Madison Magnavox Magnum Manesth Manhattan Marantz Mark Mastro Masuda Matsui Matsushita 68 11840, 11860, 11423, 12731, 12182, 12358, 12362, 10178, 12424, 10037, 10714, 10017, 10556, 10698 10037 10037, 11037, 10714 12676 12676, 11667, 11585 10208 10698 11037 10633 11037, 10698, 11585 11037 10037 10037 10037 11037, 12676, 10208 10178 10037 12372, 11
Reference Information Philips Phocus Phoenix Phonola Pioneer PJ Plantron Playsonic Polaroid Powerpoint Prima Prinston Pro Vision Profitronic Proline Proscan Prosonic Protech Proton Pulsar Pye Qingdao Quadro Quasar Quelle R-Line Radiola Radiomarelli 10037, 12800, 10556, 11887, 11867, 11506, 12372, 12680, 11454, 10171, 11365, 10017, 10000, 10178, 11394 10714 10037 10037, 10556 11457, 10037, 10698, 11636, 12171 11506 10037 10714, 10037 12676, 11826 10037, 10698 12461 11037 10037, 10556, 10714 10037 10625,
Reference Information ■■Television (T to Z) Tacico Tai Yi Talent Tashiko Tatung TCL TCM Teac Tec Tech Line Technica Technics Technika TechniSat Technisson Techno Technosonic Techwood Tecnimagen Teco Tedelex Teknika TELE System Telecor Telefunken Telefusion Telegazi Telemeister Telesonic Telestar Teletech Teleview 70 10178, 11150 11150 10178 10650, 11150 10037, 11150 12434, 13183, 13426, 12414, 10698 10714 10037, 11037, 10698, 10714, 11755, 10171, 10178 10037 10037, 11585 11037 10556, 10650 11667, 12676
Reference Information Matsui Medion Mitsubishi OK.
Reference Information Integra Irradio ITT JDB JMB JVC Kansas Technologies Kendo Kennex Kenwood Kiiro Kupperbusch Leiker Lenco Lexicon LG Lifetec Linetech Linsar Lodos Loewe Logik Lumatron Lunatron Luxman Luxor Magnavox Manhattan Marantz Mark Marquant Matsui Maxim 72 32147, 30627, 31769, 30503, 31612, 30571, 31634 31233, 30646 31233 30730 32966 30623, 31602, 30503, 30539, 32966 31233 30713, 30831 30713, 30770 30490 30770 32966 30872 30713, 30770 32545 30741, 31602, 31233 30831 32966 32966 30713 30741, 3
Reference Information Supratech Sylvania Symphonic Sytech Tandberg Targa Tascam Tatung TBoston Tchibo TCM Teac Technica Technics Technika Technosonic Techwood Telefunken Teletech Tensai Theta Digital Thomson Tokai Toshiba TRANS-continents Transonic Trevi TVE United Universum Urban Concepts Venturer Vestel VIZIO 32139 30675, 30630 30675 30831 30713 30741 31818 30770 32139 30741 30741 30571, 30675, 30741, 31818, 32139, 34004 30713 30490 30770, 30831 30730 30713, 32966 30551, 32966 30713 30770 30571 30551,
Reference Information ADB Advanced Broadband Advanced Telemedia Airwave Networks Akado Alabama Broadband Alcom Algona Municipal Utilities All West Communications Alleghany Cablevision Allegiance Communications Alliance Communications Allied Telesis Almega Cable Alpine Cable Alta Utilities Alternative Cable Altibox Altitude Communications Americable International American Broadband 02586, 01920, 01481, 01998, 02437, 03028 01376, 01877, 01982 01376, 01877, 01982 01376, 01982 02043 01376 02437 01376, 01877,
Reference Information Branch Cable Brandenburg Telecom Brandywine Cablevision Bresnan Briand et Moreau Cable Bright Green Communications Bright House Bristol Tennessee Essential Services Bristol Virginia Utilities 01376, 01877, 01982 01481, 01998, 03028 01376, 01877, 01982 01376, 01877 01376, 01877, 01982 01376, 01877, 01982 01877, 01376 01877, 01998 01376, 01877, 01982 British American 01376, 01877, 01982 Broadstar 01376, 01877, Communications 01982 Broadstripe 01376 Brockway Television 01376, 01877, 019
Reference Information Chester Telephone Chinook Progressive Club TV Chippewa Valley Cable Choice Cable TV Choice Communications Choice Television ChoiceCable Christy Cablevision CimTel Cincinnati Bell Circle Bar Cable Television Cisco Citizens Cable Citizens Cable TV Citizens Cablevision Citizens Mutual Telephone Citizens Telecom Citizens Telephone City Cablevision City of Barnesville Cable City of Baxter Springs Cable City of Hawarden Cable City of Norway Cable City of Quitman Cable 76 01376 01376, 0187
Reference Information Crow Cable TV CRRS-TV CRST Telephone Authority Crystal Cable TV CSI Cable CT & R Cable CTC Cunningham Telephone & Cable Curtis Cable TV 01376, 01877, 01982 01376 01481, 01998, 03028 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376 01376, 01877, 01982 CUTV 01376, 01877, 01982 CWA Cable 01376, 01877, 01982 D & D Cable Systems 01376, 01877, 01982 D & P Communications 01376 Daeryung 01877 Dairyland Cable 01376, 01877, Systems 01982 Dakota Central 02345 Telecommunic
Reference Information Fort Jennings Communications Fort Towson Cable Foster Communications Frank Howard TV Cable Frankfort Plant Board Cable Freebox FTC Full Channel TV Full Choice Communications Fusion Broadband Futuristic Cablevision Galaxy American Communication Galaxy Cable 02586 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01976 01877, 01982, 01376 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01998 Gardonv
Reference Information Hooper Telephone 01376, 01877, 01982 Horizon Cable TV 01376, 02586 Horizon Telecom 02586 Horry Telephone 01376, 01877, Cooperative 01982 Hospers Telephone 01376, 01877, 01982 Hotwire 02586 Houston Cable 01376, 01877, 01982 Hrvatski Telekom 02132 HTC Communications 01481, 01998, 03028 HTC Services 01376, 01877, 01982 Humax 00660, 02620, 02043, 02165 HunTel Systems 01376 Huxley 01376, 01877, Communications 01982 Hydaburg Cable TV 01376, 01877, 01982 HYDE County 01376, 01877, Cablevision
Reference Information Lexcom Cable Services Liberty Cablevision Liberty Communications Limestone Cablevision Lincoln Cable Television Lincolnville Lindsey Communications LISCO Litestream Holdings LNE Telco Localtel Lockesburg Cablevision Lodgenet Entertainment Lone Pine Cable TV Longview Communications Lonsdale Video Ventures Loretel Cablevision Loretel Systems Lost Island Cable TV Lumos Networks Lycom Communications M-Tek Systems M.T.C.
Reference Information Motorola 01376, 02437, 02378, 01998, 00858, 02952, 01562, 01982, 02401 Moultrie 01376, 01877, Telecommunications 01982 Mountain Shadows 01376, 01877, Cable TV 01982 Mountain 01376, 01877, Telecommunications 01982 Mountain Zone TV 01376, 01877, 01982 Movistar 03288 Moxi 02187 Mt.
Reference Information OTEC Communications Our Cable 02586 01376, 01877, 01982 Overton County Cable 01376, 01877, 01982 Oxford Networks 01376, 01877, 01982 Pace 01877, 01060, 02620, 01982, 01582, 01376, 01883, 02401, 03454 Packerland Broadband 01376 Paleajook Cooperative 01376, 01877, 01982 Palmer Mutual 01376, 01877, Telephone 01982 Palmetto Rural 00858 Telephone Cooperative Panasonic 01982 Pangnirtung 01376, 01877, Cooperative 01982 Panhandle Telephone 01376 Panora 01481 Telecommunications Paragould Ligh
Reference Information Reveille Broadband 01376, 01877, 01982 Reynolds Cable 01376, 01877, 01982 RGA Cablle 01376, 01877, 01982 Ridgewood 01376, 01877, Cablevision 01982 Ringgold Telephone 01376, 01877, 01982 Rio Virgin Telephone 01376, 01877, 01982 Riondel Community 01376, 01877, Cable Society 01982 Ripley Video Cable 01376, 01877, 01982 Ritter Cable 01376, 01877, 01982 River Road Cable 01376, 01877, 01982 River Valley Cable TV 01376, 01877, 01982 River Valley 01481, 01998, Telecommunications 03028 Riversi
Reference Information South Benton Cablevision South Central Communications South Holt Cablevision South Slope Communications Southeast Cable TV Southern Cayuga County Cable Southern Coastal Cable Southern Kansas Telephone Southern Plains Cable Southern Vermont Cable Southey Cable 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376, 01877, 01982 01376, 01982 01376, 01877, 01982 Southside TV 01376, 01877, 01
Reference Information Touchet Valley Television TP Trans-Video Trappers Loop Communications Trenton Cable Tri-County Cable TV TrioTel Communications Troy Cablevision Trust Cable TV TruVista Tudjaat Cooperative Tulalip Broadband Tullahoma Utilities Tulugak Cooperative Turquoise Turtle TV TV Cable TV Cable Company of Andalusia TV Cable of Winamac TV Northeast TV Service TVB TVC TVision TVMAX TVS Cable 01376, 01877, 01982 02407 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376, 01877, 01
Reference Information Western Telephone Company Western Wisconsin Communications Westman Communications Westphalia Broadband Wetherell Satellite Cable TV WFL Cable Television White County Video WideOpenWest Wikstrom Systems Wilco Electronic Systems Wilkes Telecommunications Willamette Broadband Windbreak Cable TV Windjammer Cable Windom Communications Windstream Winslow Communications Wire Tele-View Wireless One Wittenberg Telephone Wood County Telephone Woodsfield Municipal Cable Worth Cable TV WT Services
Reference Information Finlux FinnSat Fortec Star Foxtel Freesat Freesat+ Frontier Communications Fuji Onkyo Galaxis General Instrument General Satellite Globo GoGen GOI Gold Box Gold Vision Goodmans Gradiente Grocos Grundig Hanseatic HD+ HDT Hirschmann Hitachi Hornet HTS Huawei Hughes Network Systems Humax ibox 02034 01195, 01197 01631 01356, 00879, 01176 01692, 02376 02443 00775 01631 00853, 00879 00869 01176 02026, 02957 02738 00775 00853 01631 01284, 02376, 02034 00887, 00856, 00099 01409 00847, 02376
Reference Information Shinelco Sigmatek SilverCrest SKY Sky Brasil SKY Deutschland SKY Italia SKY Mexico SKY New Zealand SKY PerfecTV! SkyCable SkyLife Skylink Skymaster Skyplus SkySat Skyworth SL SM Electronic Smart Sony Star Star Choice Stream System Strong Sunny Sunstech Supernova T-Mobile 88 02738 02738, 02813 02026 00856, 00847, 01662, 00887, 01175, 02619, 01693, 00099, 01114, 01377, 01915, 02467, 03469 00856, 00887, 01377, 02619 02443, 01114, 01915, 02620 01693, 02467, 00853, 01356 00856, 02619,
Reference Information Western Digital Woxter Xbox ZT Group 02558 02709 01805, 01272 01272 ■■CD Advantage AH! Aiwa Arcam Atoll Electronique Audio Research Audiolab Audiomeca Audioton AVI Balanced Audio Technology Cairn California Audio Labs Cambridge Cambridge Audio Carver CCE Cyrus Denon DKK DMX Electronics Dynaco Genexxa Goldmund Grundig Harman/Kardon Hitachi Integra JVC Kenwood Krell Linn Loewe Magnavox 70032 70157 70157 70157 70157 70157 70157 70157 70157 70157 70157 70157 70029, 70303 70157 70157 701
Reference Information Cisco Citycable Cogeco Comcast Cox Darty Box Digeo Freebox Grande Communications Humax ImOn Communications Insight Inter Mountain Cable Kabel Deutschland Knology Mediacom MetroCast Cablevision Midcontinent Communications Motorola Moxi NET NorthwesTel Novus Numericable Pace Panasonic Philips Pioneer RCN Rogers Sagem Samsung 90 01877, 02589, 01982, 01582, 01883, 02401, 03265 03477 01376, 01877, 01982 01376, 01877, 01982, 02187 01877, 01376 02436 02187 01976 01877, 01376 Scientific At
Reference Information MHTC Microwave Satellite Technologies Millennium Telecom Minburn Communications MM&G Enterprises Motorola Movistar MTS NDTC North Central Telephone North Dakota Telephone North State Communications Norvado Nsight NU Telecom Oi TV Open IPTV Optimus Clix Orange OTEC Communications Pace Panora Telecommunications Paul Bunyan Communications Pine Island Telephone Polar Communications Poplar Bluff Municipal Utilities Portugal Telecom Price County Telephone 01481, 01998 01481, 01998 01481, 0
Reference Information Sony TiVo 92 20636 20739, 20636
Integra Division of 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.integra.eu Integra Division of 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.integra.com.