Owner's Manual

Using the Listening Modes
18
surround sound processing.
• Input source: 5.1 ch, 7.1 ch
• Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch

Orchestra
Suitable for classical or operatic music, This mode
emphasizes the surround channels in order to widen the
stereo image, and simulates the natural reverberation of a
large hall.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch

PLIIz Height (Dolby Pro Logic IIz Height)
This mode allows you to effectively use the existing
programs when height speakers are connected. It is
suitable for various kinds of sources including movie, music
and especially games.
• Input source: STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 7.1 ch height

Stereo
In this mode, sound is output from the front left and right
speakers and subwoofer.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 2.1 ch, 3.1 ch, 5.1 ch, 7.1 ch

Studio-Mix
Suitable for rock or pop music, Listening to music in this
mode creates a lively sound field with a powerful acoustic
image, like being at a club or rock concert.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch

T-D (Theater-Dimensional)
In this mode, you can enjoy a virtual playback of
multichannel surround sound even with only two or three
speakers. This works by controlling how sounds reach the
listener’s left and right ears.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 2.1 ch, 3.1 ch, 5.1 ch, 7.1 ch
• Good results may not be possible if there is too much
reverb, so we recommend that you use this mode in an
environment with little or no natural reverb.

TV Logic
Suitable for TV shows produced in a TV studio, This mode
enhances the surround effects to the entire sound to give
clarity to voices and create a realistic acoustic image.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch

Unplugged
Suitable for acoustic instruments, vocals and jazz, This
mode emphasizes the front stereo image, giving the
impression of being right in front of the stage.
• Input source: MONO, STEREO, 5.1 ch, 7.1 ch
• Speaker configuration: 5.1 ch, 7.1 ch
Checking the Input Format
You can check the audio format of the input signals. While
audio from the player is being input, press Display on the
remote controller several times to switch the information
shown on the main unit display. If "Dolby D 5.1" is displayed
in Signal format, the Dolby Digital 5.1 ch signals are being
input.