Owner's Manual

Advanced Speaker Connection

Bi-Amping

It is possible to connect speakers supporting bi-amping to

improve quality of the bass and treble. Up to 5.1 ch will be

played in bi-amping.



Connections

Connect as below using the FRONT terminals and

BACK or HEIGHT terminals.

Front R Front L

Tweeter (treble)

Woofer (bass)

Turn the unit on and set "Speaker Setup" to "Bi-Amp".

After pressing RCV, press Home on the remote

controller.

Select "Setup" with the cursors and press Enter.

With the cursors, select "2.Speaker Setup" -

"Speaker Settings" - "Front Speakers Type".

Select "Bi-Amp" with the cursors.

• Before bi-amping, be sure to remove the short-

circuit connector that connects the tweeter (treble)

terminal and the woofer (bass) terminal.

• Use speakers supporting bi-amping only. For

details, refer to the speakers' instruction manual.

Connecting a Power Amplifier

You can connect a power amplifier to the unit and use the

unit as a pre-amplifier in order to produce a large volume

that cannot be output with the unit only. Connect the

speakers to the power amplifier. For details, refer to the

power amplifier's instruction manual.



Connections

Power amplifier

• Set the unconnected channels to "None" in "Speaker

Configuration".

– After pressing RCV, press Home on the remote

controller. Select "Setup" with the cursors and press

Enter. Then select "2.Speaker Setup" - "Speaker

Configuration" and set the unconnected channels to

"None".