Owner's Manual

Advanced Settings
30
Setting Item Default Value Setting Details
Edge
Enhancement
Off Adjust the sharpness of the outline of image.
Select from "Off", "Low", "Mid" (Middle), and
"High".
r The setting will be fixed to "Off" if "Game
Mode" is set to "On".
r When the horizontal resolution of the output
video is 2,000 TV lines or more, this setting is
set to "Off".
Noise Reduction Off Reduces the noise of the screen. Select from
"Off", "Low", "Mid" (Middle), and "High".
r The setting will be fixed to "Off" if "Game
Mode" is set to "On".
Resolution Through Adjust the output resolution of the HDMI OUT
jacks. The image resolution of the unit will be
converted so that it can match the resolution
supported by the TV used.
"Through": The output resolution will be the
same as that of the input signals.
"Auto": The resolution will automatically be
converted to the resolution supported by the TV.
"480p (480p/576p)", "720p", "1680×720p",
"1080i", "1080p", "2560×1080p": Select the
desired resolution.
"4K": About four times as high resolution
as 1080p (3840×2160 or 4096×2160 pixels
depending on the resolution supported by the
connected TV)
r The setting can be selected only when
"Source" is selected in "1.
|
Input/Output
Assign" - "Monitor Out" - "Resolution".
r If "4K" is selected, video signals may not be
output to some types of TV. For details, see
"Supported Video Resolution of HDMI OUT
MAIN/SUB Jacks" in "Reference Information".
Brightness 0 Adjust brightness of the screen. Select a value
between "-50" to "+50".
Contrast 0 Adjust contrast of the screen. Select a value
between "-50" to "+50".
Hue 0 Correct hue of the screen. Select a value
between "-50" to "+50".
Setting Item Default Value Setting Details
Saturation 0 Adjust saturation of the screen. Select a value
between "-50" to "+50".
Color Temperature Normal Set color temperature of the screen. Select from
"Warm", "Normal" and "Cool".
Gamma 0 Adjust the relative relation between the R (red),
G (green) and B (blue) data signals of the input
image and those of the output image. Select a
value between "-3" to "+3".
Red Brightness 0 Adjust the brightness of red of the screen. Select
a value between "-50" to "+50".
Red Contrast 0 Adjust the contrast of red of the screen. Select a
value between "-50" to "+50".
Green Brightness 0 Adjust the brightness of green of the screen.
Select a value between "-50" to "+50".
Green Contrast 0 Adjust the contrast of green of the screen.
Select a value between "-50" to "+50".
Blue Brightness 0 Adjust the brightness of blue of the screen.
Select a value between "-50" to "+50".
Blue Contrast 0 Adjust the contrast of blue of the screen. Select
a value between "-50" to "+50".
r In the following cases, the settings for "Picture Adjust" cannot be changed:
– "NET", "USB" or "BLUETOOTH" is selected.
– "1.|Input/Output Assign" - "Monitor Out" is set to "SUB".
r Press CLR on the remote controller if you return all the settings from "Game Mode" through "Blue
Contrast" to their default value.