Owner's Manual

Step 3: Playing Back
En-21
(ex� L/R)"� The setting can be separately set to each
input selector�
● This setting cannot be selected if the automatic
speaker setting has not been performed�
● It cannot be set if headphones are connected or the
listening mode is Direct�
Equalizer: Assign the equalizer settings adjusted in
"Setup"-"2� Speaker"-"Equalizer Settings" to "Preset1" to
"Preset3"� The same sound field setting is applied to all
ranges when set to "Off"�
● It cannot be set if the listening mode is Direct�
Music Optimizer: Improve the quality of the
compressed audio� Playback sound of lossy
compressed files such as MP3 will be improved� The
setting can be separately set to each input selector�
● The setting is effective in the signals of 48 kHz or
less� The setting is not effective in the bitstream
signals�
● It cannot be set if the listening mode is Direct�
Late Night: Make small sounds to be easily heard� It
is useful when you need to reduce the volume while
watching a movie late night� You can enjoy the effect
only with Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, and DTS sources�
● Turning the unit to standby mode will set the setting
to "Off"� In case of Dolby TrueHD, the setting will be
set to "Auto"�
● The setting cannot be used in the following cases�
– If "Loudness Management" is set to "Off" when
playing Dolby Digital Plus or Dolby TrueHD�
– When the input signal is DTS and "Dialog
Control" is other than 0 dB�
Cinema Filter: Adjust the soundtrack that was
processed to enhance its treble, in order to make it
suitable for home theater�
● This function can be used in the following listening
modes: Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24,
DTS-HD High Resolution Audio, DTS-HD Master
Audio, DTS Express, DSD�
Center Spread: Adjust the width of the sound field of
the front channel when playing in the Dolby Surround
listening mode�
To spread the width of the sound field to the left and
right, set to "On"� To concentrate sound in the center, set
to "Off"�
● This setting may be "Off" depending on the settings
in speakers�
Dialog Control: You can increase the dialog portion of
the audio in 1 dB steps up to 6 dB so that you can make
dialog easier to hear over background noise�
● This setting is unavailable for content other than
DTS:X�
● This setting may not be available for selection with
some content�
 HDMI: Select the HDMI OUT jack to be used for output�
 Information:
Audio: Displays the audio input source, format, number
of channels, sampling frequency, listening mode, and
number of output channels�
Video: Displays information such as the video input
source, resolution, color space, color depth, 3D
information, Aspect and output�
Tuner: Displays information such as the band,
frequency, and preset number� This is displayed only
when "TUNER" is selected as the input source�
8 Other useful functions
To adjust the sound quality
It is possible to enhance or moderate the bass and treble
of front speakers� Press Tone on the main unit several
times to select the desired setting from "Bass", "Treble" and
"Phase Matching Bass", and adjust with +/-�
● It cannot be set if the listening mode is Direct�
"Bass": Allows you to enhance or moderate the bass�
"Treble": Allows you to enhance or moderate the treble�
"Phase Matching Bass": Allows you to keep the clear
midrange and effectively enhance the bass�
Checking the Input Format
Press Display on the remote controller several times to
switch the display of the main unit in order of:
Input source & volume
Listening mode
Signal format
(Audio)
Sampling frequency
Input signal resolution
(Video)
● If "Dolby D 5�1" is displayed in Signal format, the
Dolby Digital 5�1 ch signals are being input� When
listening to AM/FM radio, the band, frequency and
preset number are displayed�
Playing Audio and Video from Separate Sources
It is possible to play audio and video from different sources�
For example, you can play audio from the CD player and
video from the BD/DVD player� In this case, press BD/DVD
and then CD� Then start playback on the BD/DVD player
and CD player� This function is effective when an input with
audio only has been selected (CD, NET, BLUETOOTH,
TUNER or PHONO in the initial setting)�()
¼ When NET or BLUETOOTH is selected, press Mode on the remote
controller after pressing NET or Bluetooth on the remote controller�