Owner's Manual

Details on AM/FM reception
En-2
Details on AM/FM reception
Tuning into a Radio Station
¼ Tuning automatically
1� Press Tuner on the main unit several times to select
either "AM" or "FM"�
2� Press Tuning Mode so that the "AUTO" indicator on the
display lights�
3� Press Tuning to start automatic tuning�
● Searching automatically stops when a station is
found� When tuned into a radio station, the "
TUNED " indicator on the display lights� When
tuned into an FM radio station, the "FM STEREO"
indicator lights�
● No sound is output while the " TUNED " indicator
is off�
When the signal from an FM radio station is weak:
Radio wave may be weak depending on the building
structure and environmental conditions� In that case,
perform the manual tuning procedure as explained in the
next section, "Tuning manually", to manually select the
desired station�
¼ Tuning manually
1� Press Tuner on the main unit several times to select
either "AM" or "FM"�
2� Press Tuning Mode so that the "AUTO" indicator on the
display goes off�
3� Press Tuning to select the desired radio station�
● The frequency changes by 1 step each time
you press the button� The frequency changes
continuously if the button is held down and stops
when the button is released� Tune by looking at the
display�
To return to automatic tuning: Press Tuning Mode on the
main unit again� The unit automatically tunes into a radio
station� Normally "AUTO" should be displayed�
¼ Tuning to the frequency directly
It allows you to directly enter the frequency of the radio
station you want to listen to�
1� Press Tuner on the remote controller several times to
select either "AM" or "FM"�
2� Press D�TUN�
3� Using the number buttons, enter the frequency of the
radio station within 8 seconds�
● To enter 87�5 (FM), for example, press 8, 7, 5, or
8, 7, 5, 0� If you entered the wrong number, press
D�TUN and enter the correct one�
Presetting an AM/FM Radio Station
It allows you to register up to 40 of your favorite AM/FM
radio stations� Registering radio stations in advance allows
you to tune into your radio station of choice directly�
¼ Registration Procedure
1� Tune into the AM/FM radio station you want to register�
2� Press Memory on the unit so that the preset number on
the display flashes�
3� Press Preset several times to select a number
between 1 and 40 while the preset number is flashing
(about 8 seconds)�