Owner's Manual

Troubleshooting
En-66
guaranteed� In addition, video signals from a PC are not
supported�
● Try switching off the DeepColor function� To turn off
the DeepColor function, simultaneously press the
STRM Box and On/Standby buttons on the main unit�
While holding down STRM Box, press On/Standby
repeatedly until "Deep Color:Off" appears on the display�
To reactivate the DeepColor function, repeat the above
described step until "Deep Color:On" is appeared on the
display�
¼ There is no picture from a source connected to the
component video input jack
● If multiple video inputs are put into one input, the output
will be made in the order of HDMI, COMPONENT
VIDEO/composite video� In this case, to output
composite video, set "HDMI Input" to "-----"�
¼ Images flicker
● It is possible that the resolution of the player is not
compatible with the TV's resolution� If you have
connected the player to this unit with an HDMI cable, try
changing the output resolution on the player� There also
may be an improvement if you change the screen mode
on the TV�
Linked operation
¼ There is no HDMI linked operation with CEC-
compliant equipment such as a television
● Set the HDMI CEC (RIHD) setting of the unit to "On"�
Press Receiver and then Setup on the remote controller,
select "Setup" - "6� Hardware" - "HDMI" - "HDMI CEC
(RIHD)" and set to "Yes"�
● It is also necessary to make the HDMI linked system
settings on the CEC-compliant equipment� Check the
operating instructions�
¼ The RI functions do not work
● To use RI, you must make an RI connection and an
analog audio connection (RCA) between the component
and AV receiver�
● While Zone 2 is selected, the RI functions do not work�
Tuner
¼ Reception is noisy, FM stereo reception is noisy, or
the "FM STEREO" indicator does not stay lit
● Re-check the antenna connection�
● Relocate your antenna�
● Move the unit away from your TV or PC�
● Passing cars and airplanes can cause interference�
● Concrete walls weaken radio signals�
● Listen to the station in mono�
● When listening to an AM station, operating the remote
controller may cause noise�
Bluetooth
● Try plugging/unplugging the power of the unit and try
turning on/off the Bluetooth-enabled device� Re-startup
of the Bluetooth-enabled device may be effective�
● The Bluetooth-enabled devices must support the A2DP
profile�
● Near components such as microwave oven or cordless
phone, which use the radio wave in the 2�4 GHz range,
a radio wave interference may occur, which disables the
use of this unit�
● If there is a metallic object near the unit, Bluetooth
connection may not be possible as the metal can effect
on the radio wave�
If the above does not solve the problem, check the
following�
¼ Cannot connect with this unit
● The Bluetooth function of the Bluetooth-enabled
device is not enabled� Refer to the user manual of
the Bluetooth-enabled device for how to enable the
Bluetooth function�
● When building a Bluetooth connection between this unit
and your Bluetooth-enabled device for the first time, if
the connection fails, select "6�Hardware" - "Bluetooth",
execute "Clear" in "Pairing Information", turn off and
then on again your Bluetooth-enabled device to clear the
device name, and build the Bluetooth connection again�
● If the wireless LAN and Bluetooth connections are
used at the same time, try connecting the ETHERNET
port and router with the Ethernet cable after selecting
"6� Hardware" - "Network" and changing "Wi-Fi" to
"Off(Wired)" for a better connection�
¼ Music playback is unavailable on the unit even after
successful Bluetooth connection
● When the audio volume of your Bluetooth-enabled
device is set low, the playback of audio may be
unavailable� Increase the volume of the Bluetooth-
enabled device�
● Depending on the Bluetooth-enabled device, Send/
Receive selector switch may be provided� Select Send
mode�
● Depending on the characteristics or specifications of
your Bluetooth-enabled device, playback on the unit is
not guaranteed�
¼ Sound is interrupted
● Problem may be occurring at the Bluetooth-enabled
device� Check the information on a web page�
¼ The audio quality is poor after connection with a
Bluetooth-enabled device
● The Bluetooth reception is poor� Move the Bluetooth-
enabled device closer to the unit or remove any obstacle
between the Bluetooth-enabled device and this unit�
¼ "Bluetooth" - "Auto Reconnect" does not work
● This may not work with some Bluetooth-enabled
devices�
In that case, pair the unit and the Bluetooth-enabled
device and then play again�
Network function
● "Network Setup" becomes selectable after the network
starts up even if it cannot be selected first� It may take
about a minute to start up�
● When NET is blinking, the AV receiver is not properly
connected to the home network�
● Try unplugging the power supply of this unit and the
router, and then plugging in again� Try rebooting the
router�
If the above does not solve the problem, check the
following�
¼ Cannot access the Internet radio
● Certain network service or contents available through
the unit may not be accessible in case the service
provider terminates its service�
● Make sure that your modem and router are properly
connected, and make sure they are both turned on�
● Make sure that the router LAN side port is properly