DTR-40.6 Advanced Manual Contents AM/FM Radio Receiving Function Tuning into a Radio Station Registering an AM/FM Radio Station Using RDS (Australian model) Playing Content from a USB Storage Device 2 2 2 3 4 Listening to Internet Radio About Internet Radio TuneIn Pandora®–Getting Started (U.S.
AM/FM Radio Receiving Function Tuning into stations manually AM/FM Radio Receiving Function Tuning into a Radio Station Tuning into stations automatically 1. Press Tuner on the main unit several times to select either "AM" or "FM". 2. Press Tuning Mode so that the "AUTO" indicator on the display goes off. 1. Press Tuner on the main unit several times to select either "AM" or "FM". 3. Press Tuning 2. Press Tuning Mode so that the "AUTO" indicator on the display stays lit.
AM/FM Radio Receiving Function 3. Press Preset several times to select a number between 1 and 40 while the preset number is flashing (about 8 seconds). 2. Press and hold Memory on the main unit and press Tuning Mode to delete the preset number. • When deleted, the number on the display goes off. Using RDS (Australian model) 4. Press Memory again to register the station. • When the station is registered, the preset number stops flashing.
AM/FM Radio Receiving Function / Playing Content from a USB Storage Device Oldies (Oldies music) Folk M (Folk music) Document (Documentary) 3. Press Enter to search the radio stations of the selected type. 4. When such a radio station is found, the indication on the display flashes. Then, press Enter again. • If no stations are found, the message "Not Found" is displayed. 2.
Listening to Internet Radio Listening to Internet Radio About Internet Radio Internet radio, also called net radio, web radio or streaming radio, is an audio service accessible at the websites of service providers who distribute music and audio programs in digital format. There are numerous websites all over the world, from terrestrial station, special station to personal website that provide such a service.
Listening to Internet Radio • If you associate the device on My Page within the TuneIn website using the registration code obtained by selecting "Login" - "Login with a registration code" on the unit, you can log in without entering the user name and password. Pandora®–Getting Started (U.S., Australia and New Zealand only) Playing Back Create a New Station 1.
Listening to Internet Radio SiriusXM Internet Radio (North American only) Playing Back If you want to listen to the service, you must subscribe. To subscribe go to www.siriusxm.com/internetradio with your computer. When you subscribe, you will be provided with a username and password which has to be entered into the AV receiver. To use SiriusXM Internet Radio, you must have your AV receiver connected to the Internet. Using the remote control, follow these steps: 1.
Listening to Internet Radio Slacker Personal Radio (North American only) Operation: You can set up by viewing the guidance displayed on the TV screen. To display the guidance, you need to make HDMI connection between the unit and TV. Select the item with the cursor buttons of the remote controller and press Enter to confirm your selection. To return to the previous screen, press Return. Playing Back 1. Press NET on the remote controller to display NET TOP screen.
Listening to Internet Radio Registering Other Internet Radios Registering a Station Registering a Station with PC To listen to other Internet radio program, register the program in the "My Favorites" list on the NET TOP screen as described below. The unit supports Internet radio stations stored in the following formats: PLS (URL ending in .pls), M3U (URL ending in .m3u) and RSS (URL ending in rss/rdf/ xml). • You can register up to 40 Internet radio stations.
Listening to Internet Radio To rename the registered radio station: While the radio station is being played or when it is selected from the "My Favorites" list, press Menu to display the menu screen. Select "Rename this station" with the cursors and press Enter to display the keyboard screen. Rename the station as desired. • Radio stations can be renamed also from "WEB Setup". 3. Select the radio station with the cursors to delete and press Menu to display the menu screen.
DLNA Music Streaming DLNA Music Streaming • With Windows Media Player 12 Remote Playback function, you can stream music files stored on your PC to the unit by operating the PC.
DLNA Music Streaming 3. Select "DLNA" with the cursors and press Enter. 4. Select the target server with the cursors and press Enter to display the items list screen. • Searching does not work in servers that do not support search functions. • The unit cannot access pictures and videos stored on servers. • Contents stored on the server may not be displayed depending on the server sharing settings. 5. With the cursors, select the music file to play, and then press Enter or to start playback.
Music Streaming from a Shared Folder Music Streaming from a Shared Folder About Shared Folder A shared folder is configured in a network device such as a PC or NAS (hard disk connected to your home network) for access from other users. You can play music files in a shared folder on your PC or NAS connected to the same home network as that of the unit.
Music Streaming from a Shared Folder 3. Select the target server with the cursors and then press Enter. • You can check the server name of your PC from the PC properties. 4. Select the target shared folder with the cursors and then press Enter. 5. If a username and password is required, enter the necessary login information. • The login information is the account information set at the time of creating the shared folder.
Using Remote Controller for Playing Music Files 1 Top Menu: This button displays the top menu for Using Remote Controller for Playing Music Files About the Remote Controller The remote controller of this unit allows you to play music files stored on USB storage devices, Internet radio, PCs and NAS devices on your home network. It also allows you to view information of the music file being played and perform various other operations. • Available buttons may vary depending on the service and device to play.
Using the Listening Modes MOVIE/TV button Using the Listening Modes Selecting Listening Mode The listening modes allow you to select the best sound effect for your input source. 1. Press Receiver on the remote controller. • Always press Receiver first to change the remote controller to Receiver mode (the mode to operate this unit) since its mode may be changed to operate another component. 2. Press one of the following buttons depending on your choice from among the four listening modes.
Using the Listening Modes T-D THX Games THX S2 Games THX button You can select a THX listening mode. • Selectable listening modes: THX Cinema THX Music THX Games THX S2 Cinema THX S2 Games THX S2 Music THX Surr EX Contents of Listening Modes Selectable listening modes will differ depending on the number of input source channels and the actual speaker configuration. Listening modes available when headphones are connected are: Mono, Direct, and Stereo.
Using the Listening Modes DTS 96/24 DTS Neo:6 This mode is for use with DTS 96/24 sources. The audio from the input source is output as-is, without surround sound processing. With 96 kHz sampling rate and 24-bit resolution, it provides superior fidelity. • Input source: 5.1 ch • Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch • Depending on the settings, this listening mode becomes DTS.
Using the Listening Modes Multichannel This mode is for use with PCM multichannel sources. The audio from the input source is output as-is, without surround sound processing. • Input source: 5.1 ch, 7.1 ch • Speaker configuration: 3.1 ch, 5.1 ch, 7.1 ch Orchestra Suitable for classical or operatic music, This mode emphasizes the surround channels in order to widen the stereo image, and simulates the natural reverberation of a large hall. • Input source: MONO, STEREO, 5.1 ch, 7.
Using the Listening Modes configured for music playback and only Timbre Matching is active. • Input source: 5.1 ch, 7.1 ch • Speaker configuration: 5.1 ch, 7.1 ch enhances the surround effects to the entire sound to give clarity to voices and create a realistic acoustic image. • Input source: MONO, STEREO, 5.1 ch, 7.1 ch • Speaker configuration: 5.1 ch, 7.1 ch –– THX Select2 Cinema: THX Select2 Cinema mode plays 5.1 movie using 8 speakers giving you the best possible movie watching experience.
Using the Listening Modes corresponds to the back speaker spacing. This will reoptimize the surround sound field. ASA is used in four modes: THX Select2 Cinema, THX Select2 Music, THX Select2 Games and Dolby Pro Logic II + THX Select2 Games. Checking the Input Format You can check the audio format of the input signals. While audio from the player is being input, press Display on the remote controller several times to switch the information shown on the main unit display. If "Dolby D 5.
Advanced Settings 4. Press / to select the desired menu, and then press Operation Advanced Settings 1. Press Receiver on the remote controller. • Always press Receiver first to change the remote controller to Receiver mode (the mode to operate this unit) since its mode may be changed to operate another component. Enter. SETUP 1. Input/Output Assign 1. Monitor Out 2. HDMI Input 3. Component Video Input How to Set 4. Composite Video Input 5.
Advanced Settings 1.Input/Output Assign Setting Item Resolution Monitor Out The video input signals input to the unit will be converted when they are output from the HDMI OUT jack to the TV so that their resolution can match that of the TV used. Setting Item Default Value Setting Details Monitor Out MAIN Select the jack to be used for HDMI output.
Advanced Settings HDMI Input Component Video Input It is possible to change assignment of input selector buttons and the HDMI IN jacks. CBL/SAT button is assigned to COMPONENT VIDEO IN jack as factory default setting. This assignment can be changed if necessary. If you do not assign a jack, select "-----". Setting Item Default Value Setting Details BD/DVD HDMI 1 "HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to BD/DVD button. If you do not assign a jack, select "-----".
Advanced Settings Composite Video Input Digital Audio Input It is possible to change assignment of input selector buttons and the COMPOSITE VIDEO IN V1 to 3 jacks. It is possible to change assignment of input selector buttons and the DIGITAL IN COAXIAL 1 to 2/OPTICAL jacks. Setting Item Default Value Setting Details Setting Item Default Value Setting Details BD/DVD ----- "VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN jack can be assigned to BD/DVD button.
Advanced Settings 2.Speaker Setup Speaker Configuration Allows you to change the speaker configuration such as presence or not of subwoofer, crossover frequency, and so on. Settings are automatically configured if you use the Automatic Speaker Setup. Furthermore, this setting cannot be selected if headphones are connected or audio is output from the speakers of the TV. Allows you to change the speaker configuration such as presence or not of each speaker, crossover frequency, and so on.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details Back 80Hz(THX) Double Bass ----- Back Channel Height LPF of LFE 2ch None 120Hz Select the crossover frequency from "40Hz" to "200Hz" to start outputting bass frequencies for each channel. "Full Band": Full band will be output. "None": When no compatible speaker is connected • In the following cases, the setting will be set to "None": –– "Surround" is set to "None".
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details Surround Left 7.0 ft/2.10 m Specify the distance between each speaker and the listening position. Surround Left 0 dB Subwoofer 12.0 ft/3.60 m Specify the distance between each speaker and the listening position. Select a value between "-12 dB" to "+12 dB". A test tone will be output each time you change the value. Select the desired level. Subwoofer 0 dB Height Left 9.0 ft/2.
Advanced Settings THX Audio Setup Setting item Default Value Setting Details Surr Back Speaker Spacing >4ft/>1.2m Select the distance between the surround back speakers from the following values. When "Unit" is set to "feet" in "Speaker Distance": Select a value from "<1ft", "1ft-4ft", and ">4ft". When "Unit" is set to "meters" in "Speaker Distance": Select a value from "<0.3m", "0.3m-1.2m", and ">1.2m".
Advanced Settings 3.Audio Adjust Dolby Configure various settings related to sound, such as settings for listening to multiplex audio or multilingual TV broadcasts and sound field settings for listening modes. Make the settings for Dolby listening mode. Multiplex/Mono Setting Item Default Value Setting Details Multiplex Input Channel Main Set the audio channel or language to be output when playing multiplex audio or multilingual TV broadcasts etc.
Advanced Settings Setting Item Default Value Setting Details LFE Level Loudness Management On Enable the Late Night function that allows you to enjoy surround sound of Dolby TrueHD playback even in low volume. "On": Use this function "Off": Do not use this function Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel PCM, Dolby TrueHD, DTS-HD Master Audio and DSD signals.
Advanced Settings 4.Source Setup Name Edit Adjust the volume level difference among the multiple devices connected to this unit, rename an input selector, or adjust the image quality. The setting can be separately set to each input selector button. When you select a desired input to check the video or audio, start playback of the connected device.
Advanced Settings Picture Adjust Setting Item Default Value Setting Details Adjust the image quality. (Possible only when the video player is connected to the HDMI OUT MAIN jack) If you adjust it by checking the video, press Enter. Press Return to return the screen to the previous status. Picture Mode Custom An appropriate image quality setting for cinema or game can be selected. You can also adjust each item to obtain your favorite image quality.
Advanced Settings Setting Item Film Mode Edge Enhancement Noise Reduction Resolution Brightness 34 Default Value Setting Details Auto Change to the setting suitable for film. "Auto": Image processing suitable for film will be executed. "Video": "Film Mode" will not be applied and the input signals will be processed as video source. Off Off Through 0 Adjust the sharpness of the outline of image. Select from "Off", "Low", "Mid" (Middle), and "High".
Advanced Settings Audio Selector 5.Listening Mode Preset Make the audio input setting. The setting can be separately set to each input selector button. Select the input selector to configure. Setting Item Default Value Setting Details Audio Selector – Allows you to select prior input source. "ARC": When giving priority to input signal from ARC compatible TV. • The setting can be selected only when "Audio Return Channel" is set to "Auto" and also the "TV/CD" input is selected.
Advanced Settings 6.Miscellaneous OSD Setup Volume Setup Make the setting of on-screen display function that can display the setting menu screen, volume operation screen and the like on the TV. Make the setting of on-screen display function that can be displayed on the TV when you use the setting menu or control the volume. Setting Item Default Value Setting Details Volume Display Absolute Switch the volume display between the absolute value and relative value.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details BD/DVD Main Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details PC Main Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details TUNER Main Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings 12V Trigger B Setup Setting Item Default Value Setting Details You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. When the desired input is selected, power link operation will be activated with a control signal of maximum 12 V/25 mA output from the 12V trigger output jack. CBL/SAT All Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details GAME All Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details PHONO All Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings 12V Trigger C Setup Setting Item Default Value Setting Details You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. When the desired input is selected, power link operation will be activated with a control signal of maximum 12 V/25 mA output from the 12V trigger output jack. CBL/SAT Zone2 Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details GAME Zone2 Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings Setting Item Default Value Setting Details Setting Item Default Value Setting Details PHONO Zone2 Set the 12V trigger output setting to each input. Setting should be made for each 12V TRIGGER OUT jack.
Advanced Settings 7.Hardware Setup Tuner Multi Zone Setting Item Default Value Setting Details Zone 2 Out Fixed Select which of the integrated amplifier in a separate room or this unit should be used to adjust the volume when Zone 2 is active. "Fixed": Adjust on the Integrated amplifier in a separate room "Variable": Adjust on the unit Zone 2 Maximum Volume Off Set the maximum value for Zone 2 to avoid too high volume. Select a value from "Off", "50" to "99".
Advanced Settings HDMI Setting Item Default Value Setting Details HDMI CEC (RIHD) Off Setting to "On" enables the input selection link and other link functions with HDMI connected CEC compliant device. "On": Use this function "Off": Do not use this function • Depending on the TV set, a link may need to be configured on the TV. • This function is effective only when the device is connected to the HDMI OUT MAIN terminal.
Advanced Settings Setting Item Default Value Audio TV Out (MAIN) Off Setting Details Setting Item Default Value Setting Details You can enjoy audio through the speakers of the HDMI connected TV while this unit is on. "On": Use this function "Off": Do not use this function • If you select "On", set "HDMI CEC (RIHD)" to "Off." • The setting is fixed to "Auto" if "HDMI CEC (RIHD)" is set to "On".
Advanced Settings Default Value Setting Details Network Sub Window Multi Set how to display preview thumbnails. "Multi": Displays all the thumbnails of HDMI IN 1, 2, 3, 4 and Front at once. "Single": Displays each thumbnail individually. Position Bottom/Lower Right Set the position to display preview thumbnails. When "Multi" is selected for "Sub Window": Select from "Top", "Bottom", "Left" and "Right".
Advanced Settings Firmware Update 8.Remote Controller Setup Setting Item Default Value Setting Details Setting Item Default Value Setting Details Update Notice Enable Availability of a firmware update will be notified via network. "Enable": Notify updates "Disable": Do not notify updates Remote ID 1 Version Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Integra/Onkyo components that are installed in the same room.
Operating Other Components Using Remote Controller 1. After pressing Receiver, press Home on the remote Operating Other Components Using Remote Controller controller. Functions of Remote Mode Buttons You can control any other device than this unit by programming a specified remote control code to a Remote Mode button of the remote controller. Register a remote control code to a desired Remote Mode button and press it to enter the remote mode that allows you to operate the corresponding device.
Operating Other Components Using Remote Controller 3. With the number buttons, enter the 5-digit remote control code within 30 seconds. • The registration is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when registering the remote control code fails. Try the registration again. 2. Within 30 seconds, press the colored buttons from left to right, in the order you want to remap.
Operating Other Components Using Remote Controller VCR/PVR Operation 2 Source 3 Muting 4 CH +/-, Disc +/- F G H 5 8 6 7 9 I 2 5 Top Menu 6 / / / , Enter 7 Setup 8 Menu 9 Return , , , , , , () F G A (Red), B (Green), C (Yellow), D (Blue) H Number 1 to 9, 0, +10 I CLR, Display Press the Remote Mode button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component.
Operating Other Components Using Remote Controller F G H , , , , , F G Number 1 to 9, 0, +10 H CLR, Display , Press the Remote Mode button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons. Available buttons vary depending on the product category of the component. Operation may be incorrect or impossible depending on the product.
Operating Other Components Using Remote Controller Cassette Tape Deck Operation Press the Remote Mode button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons. Available buttons vary depending on the product category of the component. Operation may be incorrect or impossible depending on the product.
Operating Other Components Using Remote Controller 1. While holding down Receiver, press the desired My Movie: The power of the TV, the player programmed to BD/DVD, and the unit is turned on. The input is switched to "BD/DVD" and playing starts. • Playing may not start depending on the start-up time of the player. In that case, press on the remote controller. Activities button (My Movie, My TV or My Music) about 3 seconds until the Activities button (My Movie, My TV or My Music) stays lit.
Operating Other Components Using Remote Controller 2. Press All Off again to clear. • The All Off button flashes twice. • The operation programmed to the Activities button returns to the preset operation after the learned operation is cleared.
Advanced Speaker Connection 2 Select "Setup" with the cursors and press Enter. 3 With the cursors, select "2.Speaker Setup" - Advanced Speaker Connection "Speaker Settings" - "Front Speakers Type". 4 Select "Bi-Amp" with the cursors. • Before bi-amping, be sure to remove the shortcircuit connector that connects the tweeter (treble) terminal and the woofer (bass) terminal. • Use speakers supporting bi-amping only. For details, refer to the speakers' instruction manual.
Connecting and Operating Onkyo RI Components Connecting and Operating Onkyo RI Components About RI Function Direct Change: When playback is started on a component connected via RI, the unit selects that component as the input source. Remote Controller Operation: Allows you to operate RIcompatible Onkyo components using the AV receiver's remote controller. Point the remote controller at remote control sensor of the unit. This operation is possible only when the RI remote control code is programmed.
Connecting and Operating Onkyo RI Components iPod/iPhone Operation 6 The RI Dock allows you to use the AV receiver's remote controller to operate and play music on your iPod/iPhone. Moreover, it also allows you to view videos on your iPod/ iPhone on the screen of your TV, as well as perform RI operations if connected via RI. This operation is possible only when the RI remote control code is programmed.
Control Function between the Unit and External Component Control Function between the Unit and External Component You can enable the control functions between the unit and external devices using the terminals below. Special devices or cable connections are necessary to enable the functions. For more information about preparation, contact the specialized stores.
Firmware Update Updating the Firmware via Network Firmware Update About Firmware Update There are two methods for updating the firmware: via network and via USB. Use the one that best suits your environment. • For the latest information on updates, visit the Integra website. • Before updating, make sure that the speaker setup microphone is not connected.
Firmware Update If an Error Message is Displayed Updating the Firmware via USB Update Case 1: When an error occurs, "- Error!" is appeared on the display of the unit. ("" represents an alphanumeric character.) Check the following: Before Start: • Prepare a 64 MB or larger USB storage device. –– Media inserted in a USB card reader may not be used for this function. –– USB storage devices with security function are not supported. –– USB hubs and USB devices with hub function are not supported.
Firmware Update 6. Press RCV and then press Home on the remote controller. 9. Disconnect the USB storage device from the unit. 10. Press On/Standby on the main unit to turn the unit into standby mode. The process is completed and your firmware is updated to the latest version. • Do not use Receiver on the remote controller. The Home menu is displayed on the TV screen. HOME Setup 7. With the cursors, select "Setup" - "7.Hardware Setup" "Firmware Update" - "Update via USB", and then press Enter.
Troubleshooting How to reset the remote controller Troubleshooting Before starting the procedure 1. While holding down 1Receiver on the remote controller (note that step 2 must be performed with this button pressed down) 2. Press and hold down 2 Home until the 1 Receiver button stays lit (about 3 seconds). Within 30 seconds, press 1 Receiver again. Resetting the unit to the status at the time of shipment may solve the problem.
Troubleshooting Only the front speakers produce sound • When the Stereo or Mono listening mode is selected, only the front speakers and subwoofer produce sound. • Make sure the speakers are configured correctly. Only the center speaker produces sound • If you use the Dolby Pro Logic II listening mode with a mono source, such as an AM radio station or mono TV program, the sound is concentrated in the center speaker. • Make sure the speakers are configured correctly.
Troubleshooting There is no picture from a source connected to an HDMI IN • Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported. • Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not support the resolution of the video input from the player. Change the setting on the player.
Troubleshooting iPod/iPhone does not work properly • Try reconnecting your iPod/iPhone. Multi-zone Function There is no sound • When you connect a CD player or such other player without HDMI output jack, connect it to the analog audio input jacks of the unit. Multi-zone output is not possible if the connection is only with digital optical cable or digital coaxial cable. In case of analog connection, analog audio output setting may be necessary on the player.
Troubleshooting The following settings can be made for the composite video inputs • While holding down the input selector button to configure, press Home once at a time until "Video ATT: On" appears on the display. To resume the setup, repeat the above described step until "Video ATT: Off" appears on the display. This setting is possible for input selectors assigned with one of the video inputs "VIDEO 1" to "VIDEO 3" in "1.Input/Output Assign" - "Composite Video Input".
Reference Information Reference Information Linked Operation with CEC-compatible Components The AV receiver is compatible with the following components (as of January 2014).
Reference Information About HDMI HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Bluray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals and digital audio of digital video (2-channel PCM, multichannel digital audio, and multichannel PCM). The HDMI video stream (i.e.
Reference Information CAT5 Ethernet cable The Ethernet cable is a cable that actually connects components that comprise the network. There are straight type and cross type Ethernet cables. • Use a shielded CAT5 Ethernet cable (straight-type) to connect the unit to your home network. Consult your cable store for details of Ethernet cable. Network server (When PC etc./network server is used) Component that stores music files and provides the unit with those files at the time of playback.
Reference Information Note: • With remote playback, this unit does not support the following music file formats: −− FLAC, Ogg Vorbis, DSD and Dolby TrueHD. MP3 (.mp3 or .MP3) • Supported formats: MPEG-1/MPEG-2 Audio Layer 3 • Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz • Supported bitrates: Between 8 kbps and 320 kbps and VBR. WMA (.wma or .
Reference Information Remote Control Code List ■■Television (A to E) A.R.
Reference Information ESA Euroman Europa Europhon Evesham Technology Excello Exquisit 10171 10037 10037 10037 11667 11037 10037 Genesis Genexxa GFM Gibralter Gibson Gintai Godrej GoGen GoldStar 12676 11585 10625, 11037, 10037, 10195, 11585, 12676 10037, 10171 10208 11667, 10714, 12676, 10037, 10556 10714, 10037, 11037, 10208, 10556 10208 10037 10037 10037 11636 10037 11826 10809 10809 13817, 10171, 11394, 11037, 10714 11037 10037 10037 11755 11447, 10178, 10625, 11454 10037 Goodmans ■■Television (F to
Reference Information LG LiesenKotter Lifetec Linetech Linsar Local India Brand Local Malaysia Brand Lodos Loewe Logik Luma Lumatron Lumenio Lux May Luxor LXI Madison Magnavox Magnum Manesth Manhattan Marantz Mark Mastro Masuda Matsui 76 11840, 11860, 11423, 12731, 12182, 12358, 12362, 10178, 12424, 10037, 10714, 10017, 10556, 10698 10037 10037, 11037, 10714 12676 12676, 11667, 11585 10208 10698 11037 10633 11037, 10698, 11585 11037 10037 10037 10037 11037, 12676, 10208 10178 10037 12372, 11454, 11506,
Reference Information Philips Phocus Phoenix Phonola Pioneer PJ Plantron Playsonic Polaroid Powerpoint Prima Prinston Pro Vision Profitronic Proline Proscan Prosonic Protech Proton Pulsar Pye Qingdao Quadro Quasar Quelle R-Line Radiola Radiomarelli 10037, 12800, 10556, 11887, 11867, 11506, 12372, 12680, 11454, 10171, 11365, 10017, 10000, 10178, 11394 10714 10037 10037, 10556 11457, 10037, 10698, 11636, 12171 11506 10037 10714, 10037 12676, 11826 10037, 10698 12461 11037 10037, 10556, 10714 10037 10625,
Reference Information ■■Television (T to Z) Tacico Tai Yi Talent Tashiko Tatung TCL TCM Teac Tec Tech Line Technica Technics Technika TechniSat Technisson Techno Technosonic Techwood Tecnimagen Teco Tedelex Teknika TELE System Telecor Telefunken Telefusion Telegazi Telemeister Telesonic Telestar Teletech Teleview 78 10178, 11150 11150 10178 10650, 11150 10037, 11150 12434, 13183, 13426, 12414, 10698 10714 10037, 11037, 10698, 10714, 11755, 10171, 10178 10037 10037, 11585 11037 10556, 10650 11667, 12676
Reference Information Matsui Medion Mitsubishi OK.
Reference Information Integra Irradio ITT JDB JMB JVC Kansas Technologies Kendo Kennex Kenwood Kiiro Kupperbusch Leiker Lenco Lexicon LG Lifetec Linetech Linsar Lodos Loewe Logik Lumatron Lunatron Luxman Luxor Magnavox Manhattan Marantz Mark Marquant Matsui Maxim 80 32147, 30627, 31769, 30503, 31612, 30571, 31634 31233, 30646 31233 30730 32966 30623, 31602, 30503, 30539, 32966 31233 30713, 30831 30713, 30770 30490 30770 32966 30872 30713, 30770 32545 30741, 31602, 31233 30831 32966 32966 30713 30741, 3
Reference Information Supratech Sylvania Symphonic Sytech Tandberg Targa Tascam Tatung TBoston Tchibo TCM Teac Technica Technics Technika Technosonic Techwood Telefunken Teletech Tensai Theta Digital Thomson Tokai Toshiba TRANS-continents Transonic Trevi TVE United Universum Urban Concepts Venturer Vestel VIZIO 32139 30675, 30630 30675 30831 30713 30741 31818 30770 32139 30741 30741 30571, 30675, 30741, 31818, 32139, 34004 30713 30490 30770, 30831 30730 30713, 32966 30551, 32966 30713 30770 30571 30551,
Reference Information ADB Advanced Broadband Advanced Telemedia Airwave Networks Akado Alabama Broadband Alcom Algona Municipal Utilities All West Communications Alleghany Cablevision Allegiance Communications Alliance Communications Allied Telesis Almega Cable Alpine Cable Alta Utilities Alternative Cable Altibox Altitude Communications Americable International American Broadband 02586, 01920, 01481, 01998, 02437, 03028 01376, 01877, 01982 01376, 01877, 01982 01376, 01982 02043 01376 02437 01376, 01877,
Reference Information Branch Cable Brandenburg Telecom Brandywine Cablevision Bresnan Briand et Moreau Cable Bright Green Communications Bright House Bristol Tennessee Essential Services Bristol Virginia Utilities 01376, 01877, 01982 01481, 01998, 03028 01376, 01877, 01982 01376, 01877 01376, 01877, 01982 01376, 01877, 01982 01877, 01376 01877, 01998 01376, 01877, 01982 British American 01376, 01877, 01982 Broadstar 01376, 01877, Communications 01982 Broadstripe 01376 Brockway Television 01376, 01877, 019
Reference Information Chester Telephone Chinook Progressive Club TV Chippewa Valley Cable Choice Cable TV Choice Communications Choice Television ChoiceCable Christy Cablevision CimTel Cincinnati Bell Circle Bar Cable Television Cisco Citizens Cable Citizens Cable TV Citizens Cablevision Citizens Mutual Telephone Citizens Telecom Citizens Telephone City Cablevision City of Barnesville Cable City of Baxter Springs Cable City of Hawarden Cable City of Norway Cable City of Quitman Cable 84 01376 01376, 0187
Reference Information Crow Cable TV CRRS-TV CRST Telephone Authority Crystal Cable TV CSI Cable CT & R Cable CTC Cunningham Telephone & Cable Curtis Cable TV 01376, 01877, 01982 01376 01481, 01998, 03028 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376 01376, 01877, 01982 CUTV 01376, 01877, 01982 CWA Cable 01376, 01877, 01982 D & D Cable Systems 01376, 01877, 01982 D & P Communications 01376 Daeryung 01877 Dairyland Cable 01376, 01877, Systems 01982 Dakota Central 02345 Telecommunic
Reference Information Fort Jennings Communications Fort Towson Cable Foster Communications Frank Howard TV Cable Frankfort Plant Board Cable Freebox FTC Full Channel TV Full Choice Communications Fusion Broadband Futuristic Cablevision Galaxy American Communication Galaxy Cable 02586 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01976 01877, 01982, 01376 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01998 Gardonv
Reference Information Hooper Telephone 01376, 01877, 01982 Horizon Cable TV 01376, 02586 Horizon Telecom 02586 Horry Telephone 01376, 01877, Cooperative 01982 Hospers Telephone 01376, 01877, 01982 Hotwire 02586 Houston Cable 01376, 01877, 01982 Hrvatski Telekom 02132 HTC Communications 01481, 01998, 03028 HTC Services 01376, 01877, 01982 Humax 00660, 02620, 02043, 02165 HunTel Systems 01376 Huxley 01376, 01877, Communications 01982 Hydaburg Cable TV 01376, 01877, 01982 HYDE County 01376, 01877, Cablevision
Reference Information Lexcom Cable Services Liberty Cablevision Liberty Communications Limestone Cablevision Lincoln Cable Television Lincolnville Lindsey Communications LISCO Litestream Holdings LNE Telco Localtel Lockesburg Cablevision Lodgenet Entertainment Lone Pine Cable TV Longview Communications Lonsdale Video Ventures Loretel Cablevision Loretel Systems Lost Island Cable TV Lumos Networks Lycom Communications M-Tek Systems M.T.C.
Reference Information Motorola 01376, 02437, 02378, 01998, 00858, 02952, 01562, 01982, 02401 Moultrie 01376, 01877, Telecommunications 01982 Mountain Shadows 01376, 01877, Cable TV 01982 Mountain 01376, 01877, Telecommunications 01982 Mountain Zone TV 01376, 01877, 01982 Movistar 03288 Moxi 02187 Mt.
Reference Information OTEC Communications Our Cable 02586 01376, 01877, 01982 Overton County Cable 01376, 01877, 01982 Oxford Networks 01376, 01877, 01982 Pace 01877, 01060, 02620, 01982, 01582, 01376, 01883, 02401, 03454 Packerland Broadband 01376 Paleajook Cooperative 01376, 01877, 01982 Palmer Mutual 01376, 01877, Telephone 01982 Palmetto Rural 00858 Telephone Cooperative Panasonic 01982 Pangnirtung 01376, 01877, Cooperative 01982 Panhandle Telephone 01376 Panora 01481 Telecommunications Paragould Ligh
Reference Information Reveille Broadband 01376, 01877, 01982 Reynolds Cable 01376, 01877, 01982 RGA Cablle 01376, 01877, 01982 Ridgewood 01376, 01877, Cablevision 01982 Ringgold Telephone 01376, 01877, 01982 Rio Virgin Telephone 01376, 01877, 01982 Riondel Community 01376, 01877, Cable Society 01982 Ripley Video Cable 01376, 01877, 01982 Ritter Cable 01376, 01877, 01982 River Road Cable 01376, 01877, 01982 River Valley Cable TV 01376, 01877, 01982 River Valley 01481, 01998, Telecommunications 03028 Riversi
Reference Information South Benton Cablevision South Central Communications South Holt Cablevision South Slope Communications Southeast Cable TV Southern Cayuga County Cable Southern Coastal Cable Southern Kansas Telephone Southern Plains Cable Southern Vermont Cable Southey Cable 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376, 01877, 01982 01376, 01982 01376, 01877, 01982 Southside TV 01376, 01877, 01
Reference Information Touchet Valley Television TP Trans-Video Trappers Loop Communications Trenton Cable Tri-County Cable TV TrioTel Communications Troy Cablevision Trust Cable TV TruVista Tudjaat Cooperative Tulalip Broadband Tullahoma Utilities Tulugak Cooperative Turquoise Turtle TV TV Cable TV Cable Company of Andalusia TV Cable of Winamac TV Northeast TV Service TVB TVC TVision TVMAX TVS Cable 01376, 01877, 01982 02407 01376, 01877, 01982 01376, 01877, 01982 01376, 01877, 01982 01376 01376, 01877, 01
Reference Information Western Telephone Company Western Wisconsin Communications Westman Communications Westphalia Broadband Wetherell Satellite Cable TV WFL Cable Television White County Video WideOpenWest Wikstrom Systems Wilco Electronic Systems Wilkes Telecommunications Willamette Broadband Windbreak Cable TV Windjammer Cable Windom Communications Windstream Winslow Communications Wire Tele-View Wireless One Wittenberg Telephone Wood County Telephone Woodsfield Municipal Cable Worth Cable TV WT Services
Reference Information Finlux FinnSat Fortec Star Foxtel Freesat Freesat+ Frontier Communications Fuji Onkyo Galaxis General Instrument General Satellite Globo GoGen GOI Gold Box Gold Vision Goodmans Gradiente Grocos Grundig Hanseatic HD+ HDT Hirschmann Hitachi Hornet HTS Huawei Hughes Network Systems Humax ibox 02034 01195, 01197 01631 01356, 00879, 01176 01692, 02376 02443 00775 01631 00853, 00879 00869 01176 02026, 02957 02738 00775 00853 01631 01284, 02376, 02034 00887, 00856, 00099 01409 00847, 02376
Reference Information Shinelco Sigmatek SilverCrest SKY Sky Brasil SKY Deutschland SKY Italia SKY Mexico SKY New Zealand SKY PerfecTV! SkyCable SkyLife Skylink Skymaster Skyplus SkySat Skyworth SL SM Electronic Smart Sony Star Star Choice Stream System Strong Sunny Sunstech Supernova T-Mobile 96 02738 02738, 02813 02026 00856, 00847, 01662, 00887, 01175, 02619, 01693, 00099, 01114, 01377, 01915, 02467, 03469 00856, 00887, 01377, 02619 02443, 01114, 01915, 02620 01693, 02467, 00853, 01356 00856, 02619,
Reference Information Western Digital Woxter Xbox ZT Group 02558 02709 01805, 01272 01272 ■■CD Advantage AH! Aiwa Arcam Atoll Electronique Audio Research Audiolab Audiomeca Audioton AVI Balanced Audio Technology Cairn California Audio Labs Cambridge Cambridge Audio Carver CCE Cyrus Denon DKK DMX Electronics Dynaco Genexxa Goldmund Grundig Harman/Kardon Hitachi Integra JVC Kenwood Krell Linn Loewe Magnavox 70032 70157 70157 70157 70157 70157 70157 70157 70157 70157 70157 70157 70029, 70303 70157 70157 701
Reference Information Cisco Citycable Cogeco Comcast Cox Darty Box Digeo Freebox Grande Communications Humax ImOn Communications Insight Inter Mountain Cable Kabel Deutschland Knology Mediacom MetroCast Cablevision Midcontinent Communications Motorola Moxi NET NorthwesTel Novus Numericable Pace Panasonic Philips Pioneer RCN Rogers Sagem Samsung 98 01877, 02589, 01982, 01582, 01883, 02401, 03265 03477 01376, 01877, 01982 01376, 01877, 01982, 02187 01877, 01376 02436 02187 01976 01877, 01376 02620, 02165 0
Reference Information Microwave Satellite Technologies Millennium Telecom Minburn Communications MM&G Enterprises Motorola Movistar MTS NDTC North Central Telephone North Dakota Telephone North State Communications Norvado Nsight NU Telecom Oi TV Open IPTV Optimus Clix Orange OTEC Communications Pace Panora Telecommunications Paul Bunyan Communications Pine Island Telephone Polar Communications Poplar Bluff Municipal Utilities Portugal Telecom Price County Telephone Project Mutual Telephone 01481, 01998 0
Reference Information Sony TiVo 100 20636 20739, 20636
Integra Division of 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.integra.eu Integra Division of 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.integra.com.