Owner's Manual
Advanced Settings
31
Setting Item Default Value Setting Details
Loudness
Management
On Enable the Late Night function that allows you to
enjoy surround sound of Dolby TrueHD playback
even in low volume.
"On": Use this function
"Off": Do not use this function
• Depending on the setting of "Back" in "Speaker Configuration", the display will be changed. "PLllx" will
be displayed as "PLllx/PLII".
DTS
Make the settings for DTS Neo:6 Music listening mode.
Setting Item Default Value Setting Details
Neo:6 Music
Center Image
2 Adjust the width of the sound field of the front
channel when playing in the DTS Neo:6 Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center while
selecting a larger value spreads the sound field of
the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting Item Default Value Setting Details
Listening Angle Wide Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
• Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.
LFE Level
Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel PCM, Dolby
TrueHD, DTS-HD Master Audio and DSD signals.
Setting Item Default Value Setting Details
Dolby Digital 0 dB Select the low-frequency effect (LFE) level of
eachtypeofsignalfrom"0dB"to"-∞dB".Ifthe
low-frequency effect sound is too strong, select
"–20dB"or"–∞dB".
• This setting works on LFE channel volume of
Dolby Digital and Dolby Digital Plus sources.
DTS 0 dB Select the low-frequency effect (LFE) level of
eachtypeofsignalfrom"0dB"to"-∞dB".Ifthe
low-frequency effect sound is too strong, select
"–20dB"or"–∞dB".
• This setting works on LFE channel volume of
DTS and DTS-HD High Resolution sources.
Multich PCM 0 dB Select the low-frequency effect (LFE) level of
eachtypeofsignalfrom"0dB"to"-∞dB".Ifthe
low-frequency effect sound is too strong, select
"–20dB"or"–∞dB".
Dolby TrueHD 0 dB Select the low-frequency effect (LFE) level of
eachtypeofsignalfrom"0dB"to"-∞dB".Ifthe
low-frequency effect sound is too strong, select
"–20dB"or"–∞dB".
DTS-HD Master
Audio
0 dB Select the low-frequency effect (LFE) level of
eachtypeofsignalfrom"0dB"to"-∞dB".Ifthe
low-frequency effect sound is too strong, select
"–20dB"or"–∞dB".
DSD 0 dB Select the low-frequency effect (LFE) level of
eachtypeofsignalfrom"0dB"to"-∞dB".Ifthe
low-frequency effect sound is too strong, select
"–20dB"or"–∞dB".
• This setting works on LFE channel volume of
DSD (Super Audio CD) sources.