DTR-40.6 Basic Manual Advanced Manual found here http://integraworldwide.com/manual/dtr406/adv/en.
Before Start Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.
Step 1: Connections TV Personal computer HDMI IN HDMI OUT To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI cable HDMI OUT HDMI OUT HDMI OUT Game console 1 Set-top box/Digital video recorder, etc. Connecting the TV and players Important: The power cord must be connected only after all other connections are completed.
Step 1: Connections then Home on the remote controller, select "Setup" - "1. Input/Output Assign" - "Monitor Out" and set the default value of "MAIN" to "SUB" or "MAIN+SUB". With the sub output, the operation screen for Internet function or USB playback can be displayed. It is also possible to use the multi-zone function with this jack. For details, see the section 5 "Using the multi-zone function" of "Step 3: Playing Back".
Step 1: Connections 2 2 Front R Connecting speakers 1 Front L 3 Center Important: The power cord must be connected only after all other connections are completed. 12 3 9F 6 45 78 12 3 45 6 78 9F Front speakers Center speaker Surround speakers Subwoofer Surround back speakers Height speakers r 5.1 ch: 1 2 3 4 5 6 r 7.1 ch: 1 2 3 4 5 6 + 7 8 or 123456+9F r Up to two subwoofers can be connected.
Step 1: Connections 1/2"-5/8"(12-15 mm) Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal. Make correct connection between the unit's jacks and speaker's jacks (+ to + and - to -) for each channel. If connection is wrong, a bass sound may become poor due to reverse phase. Attaching the supplied colored speaker cable labels to the + side on the both ends of each channel's cable will help correct connection.
Step 2: Setting Up Important: When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN jack of the unit via HDMI connection. 1 Turning the power on Connect the power cord to the outlet. Press zOn/Standby on the main unit or zReceiver on the remote controller to turn the unit on or to standby mode.
Step 2: Setting Up 2. After placing the microphone at the measurement position, select "Do it Now" in the start screen and press Enter. 3. Connect the microphone to the Setup Mic jack of the unit. Setup Mic jack Speaker setup microphone 4. Follow the guidance displayed on the TV screen. AccuEQ Room Calibration Front Speakers Type Powered Zone 2 6. When the measurement is completed, the measurement result is displayed. Press W/X on the remote controller to check the settings.
Step 2: Setting Up 3rd Step : Remote Mode Setup 4th Step : Network Connection In this step, you can enable operation of the other components using the remote controller of the unit. When the Remote Mode Setup start screen is displayed, select "Yes" with the cursors and press Enter on the remote controller. Follow the guidance to select the desired Remote Mode button and in the keyboard screen, enter the first three characters of the brand name of the device you are going to program (e.g.
Step 3: Playing Back 1 Playing the player and TV 1 7 8 Remote controller parts name 1 z Receiver button: Turns the unit on or into standby mode. 2 Remote Mode/Input Selector button: Switches the input to be played. 2 3 Cursor buttons and Enter button: Moves the cursor 9 F z To control the unit: You can control any other device than this unit if you register the specified remote control code to 2 Remote Mode.
Step 3: Playing Back Listening modes Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. Movie/TV: You can select a listening mode suitable for movies and TV programs. Music: You can select a listening mode suitable for music. Game: You can select a listening mode suitable for games. THX: You can select a THX listening mode.
Step 3: Playing Back 3 Using the Home menu In the Home menu, you can make advanced setup and use Internet radio and DLNA function. For details on the operation, see the Advanced Manual (http:// integraworldwide.com/manual/dtr406/adv/en.html). 1. After pressing Receiver, press Home on the remote controller. The Home menu is displayed on the TV screen. You can also use the Home button on the main unit. HOME Setup 2.
Step 3: Playing Back AccuEQ Room Calibration: Disables the sound field set in the automatic speaker setting. The setting can be separately set to each input. r This setting cannot be selected if the automatic speaker setting has not been performed. r It cannot be set if headphones are connected or the listening mode is Direct. Late Night: Make small sounds to be easily heard. It is useful when you need to reduce the volume while watching a movie late night.
Step 3: Playing Back 5 Using the multi-zone function The function allows you to connect the unit with a TV or audio equipment placed in a separate room so that you can enjoy audio and video of the connected equipment even if you are staying in a different room. It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room.
Step 3: Playing Back c. Connecting Speakers in a Separate Room It is possible to directly connect the speakers in another room without an amplifier. Connect the speakers in another room to the ZONE2 speaker terminals of the unit using speaker cables. Note that 5.1 ch will be the maximum in the main room during Zone 2 playback.
1 K L 2 M 3 4 N 5 6 7 O 8 9 F G (North American model) H I J P Q R Front Panel 1 zOn/Standby button: Turns the unit on or into standby 2 3 4 5 6 7 8 mode. Hybrid Standby indicator: Stays lit if the unit enters standby when the HDMI Through and network standby are enabled. TONE and Tone Level buttons: Adjusts the high tone and low tone. Remote control sensor: Receives signals from the remote controller. Display Listening mode buttons: Allows you to select the listening mode.
1 2 3 4 5 6 7 8 9 F 1 23 4 5 6 9 7 8 Display 1 Stays lit in the following conditions. "Z2" "Z3": Zone 2 or Zone 3 output is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. / "3D": Input signals are 3D. / "USB" (¼): "USB" input is selected and USB storage device is connected. / "NET" (¼): "NET" input is selected and the unit is connected to the network.
Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Specifications Amplifier Section General Rated Output Power All channels: 110 watts minimum continuous power per channel, |QJO NQCFU EJCPPGNU FTKXGP HTQO *\ VQ M*\ YKVJ C maximum total harmonic distortion of 0.08% (FTC) 125 watts minimum continuous power per channel, 6 ohm loads, |EJCPPGNU FTKXGP CV M*\ YKVJ C OCZKOWO VQVCN JCTOQPKE FKUVQTVKQP of 0.
License and Trademark Information Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. THX Select2 Plus Before any home theater component can be THX Select2 Plus certified, it must pass a rigorous series of quality and performance tests.
Notes En Cs Step 3: Playing Back 5 Using the multi-zone function The function allows you to connect the unit with a TV or audio equipment placed in a separate room so that you can enjoy audio and video of the connected equipment even if you are staying in a different room It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu ray Disc player in the main room where the unit is placed while playing Internet rad o in a separate room It is als
