Owner's Manual

5
Step 1: Connections
2
Connecting speakers
Important: The power cord must be connected only after all
other connections are completed.
45
78
12
9F
63
12
Front speakers
3
Center speaker
45
Surround speakers
6
Subwoofer
7 8
Surround back speakers
9 F
Height speakers
r 5.1 ch: 123456
r 7.1 ch: 123456 + 78 or
123456 + 9F
r Up to two subwoofers can be connected.
r To use the multi-zone function, see the section 5 "Using
the multi-zone function" of "Step 3: Playing Back".
6
Subwoofer with built-
in power amplifier
6
Subwoofer with built-
in power amplifier
5
Surround R
8F
Surround back/
height R
79
Surround back/
height L
4
Surround L
3
Center
2
Front R
1
Front L
If there is only one
surround back
speaker, connect it to
the BACK or HEIGHT
L terminal.
Important: %QPPGEVURGCMGTUYKVJŝVQŝKORGFCPEG
You have to modify the setting if any of the speakers have
ŝQTOQTGVQNGUUVJCPŝKORGFCPEG;QWECPUGVWRD[
viewing the guidance displayed on the TV screen. Select
the item with the cursor buttons of the remote controller
and press Enter to confirm your selection. To return to the
previous screen, press Return. Press Receiver and then
Home on the remote controller. Select "Setup" - "2.Speaker
Setup" - "Speaker Settings" - "Speaker Impedance" and
change the default value from "6ohms" to "4ohms".