Owner's Manual

31
En
■ Category Search mode
■ Direct tuning
You can select a SIRIUS Satellite Radio channel directly
by entering its number.
Note
• If you select an unavailable channel, “INVALID CHANNEL”
appears on the display.
• If you select a channel that you are not subscribed to, “CALL
SIRIUS” appears on the display.
• Channels that are locked must be unlocked before you can listen
to them. See “SIRIUS Parental Lock” (➔ 31) for more informa-
tion.
■ Selecting the previous channel
Selecting Channels on the AV Receiver
Presetting SIRIUS Satellite Radio Channels
You can store a combination of up to 40 of your favorite
SIRIUS Satellite Radio channels and FM/AM radio sta-
tions as presets.
■ Selecting presets
Tip
• You can also use the number buttons to select a preset directly.
■ Deleting presets
SIRIUS Parental Lock
With SIRIUS Parental Lock, you can lock out channels
that you do not want to receive and use a 4-digit PIN num-
ber to prevent others from unlocking them.
2
Use q/w to select a channel.
You can also use e/r to select a category.
1
Press Tuner, and then press Enter repeatedly to
select Category Search mode.
2
Use e/r to select a category, and q/w to select a
channel in that category.
1
Press Tuner followed by D.TUN.
2
Within 8 seconds, use the number buttons to enter
the channel number.
For example, to select channel #20, press 0, 2, 0, or
2, 0, Enter.
Press Return to select the previous channel.
1
Press Tuner repeatedly to select “SIRIUS”.
2
Press Tuning Mode repeatedly to select Channel
Search mode or Category Search mode.
3
Press Enter repeatedly to select a category.
4
Use Tuning q/w to select a channel.
In Channel Search mode, you can select any channel.
In Category Search mode, you can only select chan-
nels from the currently selected category.
Channel name
1
Tune into the SIRIUS channel that you want to
store as a preset.
2
Press Memory on the AV receiver.
The preset number flashes.
3
While the preset number is flashing (about 8 sec-
onds), use Preset e/r on the AV receiver to
select a preset from 1 through 40.
4
Press Memory on the AV receiver again to store
the channel.
The channel is stored and the preset number stops
flashing.
Repeat this procedure for all of your favorite SIRIUS
Satellite Radio channels.
To select a preset, use Preset e/r on the AV
receiver or the remote controller’s CH +/–.
1
Select the preset that you want to delete.
See the previous section.
2
While holding down Memory press Tuning
Mode on the AV receiver.
The preset is deleted and its number disappears from
the display.
1
Press Receiver followed by Setup.
The main menu appears onscreen.
2
Use q/w to select “7. Hardware Setup”, and then
press Enter.
The “Hardware Setup” menu appears.
3
Use q/w to select “3. Tuner”, and then press
Enter.
7. Hardware Setup
1. Remote ID
2. MultiZone
3. Tuner
4. HDMI
5. Network