Owner's Manual

32
En
Note
• While a channel is locked, it cannot be selected for listening.
• To unlock a channel, you must enter the correct PIN number and
change it to Unlocked in step 6.
Tip
• Alternatively, you can use the AV receiver’s Setup, arrow but-
tons, and Enter.
Changing the PIN Number
4
Use q/w to select “SIRIUS Parental Lock”, and
then press Enter.
The following screen appears.
Note
•If the “SAT Radio Mode” is set to “None” (➔ 30), the
“SIRIUS Parental Lock” setting is not available.
5
Use e/r to select a number on the screen, and
then press Enter.
Repeat this for each of the four digits in the PIN
number.
If you’re entering the PIN number for the very first
time, the default is “0000”. The following screen
appears.
If you’ve already set a PIN number, you must enter
the correct PIN to get to this screen. If you enter the
wrong PIN, the message “Wrong Code!” appears
and you’ll have to enter the PIN again.
Note
•The “SIRIUS Parental Lock” setting cannot be set unless
the AV receiver and the SiriusConnect receiver are con-
nected.
6
Use q/w to select “SIRIUS Parental Lock”, and
then press Enter.
The channel number, channel name, and the current
status are displayed.
7
Use q/w to select a channel, and e/r to select
“Locked” or “Unlocked”.
8
When you’ve finished, press Enter to save your
changes, or press Return to return to the previous
screen without saving.
When Enter is pressed, the confirmation message
“Locked” or “Unlocked” appears.
9
Press Setup.
Setup closes.
0 1 2 3 4 5 6 7 8 9
SIRIUS Parental Lock
Enter Code
SIRIUS Parental Lock
Edit Code
Parental Lock
1
Press Receiver followed by Setup.
The main menu appears onscreen.
2
Use q/w to select “7. Hardware Setup”, and then
press Enter.
The “Hardware Setup” menu appears.
3
Use q/w to select “3. Tuner”, and then press
Enter.
4
Use q/w to select “SIRIUS Parental Lock”, and
then press Enter.
The following screen appears.
Note
•If the “SAT Radio Mode” is set to “None” (➔ 30), the
“SIRIUS Parental Lock” setting is not available.
5
Use e/r to select a number on the screen, and
then press Enter.
Repeat this for each of the four digits in the PIN
number.
If you’re entering the PIN number for the very first
time, the default is “0000”. The following screen
appears.
If you’ve already set a PIN number, you must enter
the correct PIN to get to this screen. If you enter the
wrong PIN, the message “Wrong Code!” appears
and you’ll have to enter the PIN again.
Note
•The “SIRIUS Parental Lock” setting cannot be set unless
the AV receiver and the SiriusConnect receiver are con-
nected.
7. Hardware Setup
1. Remote ID
2. MultiZone
3. Tuner
4. HDMI
5. Network
0 1 2 3 4 5 6 7 8 9
SIRIUS Parental Lock
Enter Code
SIRIUS Parental Lock
Edit Code
Parental Lock