Owner's Manual

Picture Adjust

Using Picture Adjust, you can adjust the picture quality

and reduce any noise appearing on the screen.

To view the TV picture while setting, press Enter. To

return to the previous screen, press Return.

Note

• If you are using the analog RGB input, the following settings are

not available:

“Film Mode”, “Edge Enhancement”, and

“Noise Reduction”.

■ Game Mode

` Off

Game Mode off.

` On:

Game Mode on.

If video signal delay occurs during playback on a video

component (i.e. game console), select the corresponding

input source and set the “Game Mode” setting to “On”.

The delay will decrease but in return the picture quality

will become poor.

■ Wide Mode

*1*2

This setting determines the aspect ratio.

Note

•When the “Game Mode” is set to “On”, this setting is fixed at

“Full”.

` 4:3:

` Full:

` Zoom:

` Wide Zoom:

` Auto

According to the input signals and monitor output

setting, the AV receiver automatically selects the

“4:3”, “Full, “Zoom” or “Wide Zoom”. For the

monitor output setting (➔ 44).