Owner's Manual

Advanced Settings (Setup Menu)
En-34
Setting Item Default Value Setting Details
Double Bass On This can only be selected when "Configuration" -
"Subwoofer" is set to "Yes" and "Front" is set to "Full
Band"�
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer�
"On": Bass output will be boosted�
"Off": Bass output will not be boosted�
● The setting will not automatically be configured
even if you performed the automatic speaker
setup�
Distance
Set the distance from each speaker to the listening position� Settings are automatically
configured if you use the automatic speaker setup�
Setting Item Default Value Setting Details
Unit feet/meters Specify the unit of distance for configuring
settings�
"feet": When setting in feet (0�1 ft to 30�0 ft, in
increments of 0�1 ft)
"meters": When setting in meters (0�03 m to
9�00 m, in increments of 0�03 m)
Front Left 12�0ft/3�60m Specify the distance between each speaker and
the listening position�
Center 12�0ft/3�60m Specify the distance between each speaker and
the listening position�
Front Right 12�0ft/3�60m Specify the distance between each speaker and
the listening position�
Height Left 9�0ft/2�70m Specify the distance between each speaker and
the listening position�
● This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Height Right 9�0ft/2�70m Specify the distance between each speaker and
the listening position�
● This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Surround Right 7�0ft/2�10m Specify the distance between each speaker and
the listening position�
Setting Item Default Value Setting Details
Back Right 7�0ft/2�10m Specify the distance between each speaker and
the listening position�
● This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Back Left 7�0ft/2�10m Specify the distance between each speaker and
the listening position�
● This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�
Surround Left 7�0ft/2�10m Specify the distance between each speaker and
the listening position�
Subwoofer 12�0ft/3�60m Specify the distance between each speaker and
the listening position�
● Default values vary depending on the regions�
● The speaker "Distance" may be unable to be changed depending on the settings in "Configuration" -
"Speaker Channels" / "Subwoofer"�
Level Calibration
Adjust the level of each speaker with the built-in test tone� Settings are automatically
configured if you use the Automatic Speaker Setup�
Setting Item Default Value Setting Details
Front Left 0 dB Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Center 0 dB Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Front Right 0 dB Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
Height Left 0 dB Select a value between "-12 dB" and "+12 dB"�
A test tone will be output each time you change
the value� Select the desired level�
● This setting cannot be changed if
"Configuration" - "Powered Zone 2" is set to
"Yes" and Zone2 is set to on�