Owner's Manual

Advanced Settings (Setup Menu)
En-36
3� Audio Adjust
Configure various settings related to sound, such as settings for listening to multiplex audio
or multilingual TV broadcasts and sound field settings for listening modes�
Multiplex/Mono
Setting Item Default Value Setting Details
Multiplex
Input Channel
Main Set the audio channel or language to be output
when playing multiplex audio or multilingual TV
broadcasts etc�
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be
output at the same time�
● If multiplex audio is being played, "1+1" will
be displayed when Display is pressed�
Mono
Input Channel
Left+Right Set the input channel to use for playing any 2
ch digital source such as Dolby Digital, or 2-ch
analog/PCM source in the Mono listening mode�
"Left": Left channel only
"Right": Right channel only
"Left + Right" : Left and right channels
Dolby
Make the settings for Dolby listening mode�
Setting Item Default Value Setting Details
Loudness
Management
On Enable the Late Night function that allows
you to enjoy surround sound of Dolby TrueHD
playback even in low volume�
"On": Use this function
"Off": Do not use this function
Theater-Dimensional
Make the settings for Theater-Dimensional listening mode�
Setting Item Default Value Setting Details
Listening Angle Wide To enhance the effect of Theater-Dimensional,
select the actual angle of the left and right
front speakers as it appears from the listening
position�
"Narrow": Less than 30°
"Wide": Greater than 30°
● Position the front speakers 20° to the listening position if you have selected "Narrow" in "Listening
Angle" and 40° if you have selected "Wide"�
Volume
Make the detailed volume setting of the unit�
Setting Item Default Value Setting Details
Maximum Volume Off Set the maximum value to avoid too high volume�
Select a value from "Off", "30" to "79"�
Power On Volume Last Set the volume level of when the power is turned
on� Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "79"
and "Max"�
● You cannot set a higher value than that of
"Maximum Volume"�
Headphone Level 0 dB Adjust the output level of the headphones�
Select a value between "-12 dB" and "+12 dB"�