Owner's Manual

Advanced Settings (Setup Menu)
En-44
Setting Item Default Value Setting Details
Usage Data No As a means of improving the quality of our
products and services, Onkyo may collect
information about your usage over the network�
Select "Yes" if you agree to our collecting this
information� Select "No" if you do not want us to
collect this information�
● You can set this after confirming the Privacy
Policy� When you select "Usage Data" and
press Enter, the Privacy Policy is displayed�
(The same screen is displayed once also
when setting up the network connection�) If
you agree to the collection of the information,
this setting also becomes "Yes"� Note that
if you agree to the Privacy Policy but select
"No" for this setting, the information will not be
collected�
Network Check – You can check the network connection�
Press Enter when "Start" is displayed�
● Wait for a while if "Network" cannot be selected� It will appear when the network function is started up�
Bluetooth
Setting Item Default Value Setting Details
Bluetooth On Select whether or not to use the Bluetooth
function�
"On": Enables connection with a Bluetooth-
enabled device by using the Bluetooth function�
Select "On" also when making various Bluetooth
settings�
"Off": When not using the Bluetooth function
Auto Input Change On The input of the unit will automatically be
switched to "BLUETOOTH" when connection is
made from a Bluetooth-enabled device to the
unit�
"On": The input will automatically become
"BLUETOOTH" when a Bluetooth-enabled
device is connected�
"Off": The function is disabled�
● If the input is not switched automatically, set
to "Off" and change the input manually�
Auto Reconnect On This function automatically reconnects to the
Bluetooth-enabled device connected last when
you change the input selector to "BLUETOOTH"�
"On": Use this function
"Off": Do not use this function
● This may not work with some Bluetooth-
enabled devices�
Pairing Information – The information of the previous pairing stored in
this unit will be initialized�
Pressing Enter when "Clear" is displayed
initializes the pairing information stored in this
unit�
● This function does not initialize the pairing
information on the Bluetooth-enabled device�
When pairing the unit again with the device,
be sure to clear the pairing information on
the Bluetooth-enabled device in advance�
For information on how to clear the pairing
information, refer to the Bluetooth-enabled
device's instruction manual�
Device – Displays the name of the Bluetooth-enabled
device connected to the unit�
● The name is not displayed when "Status" is
"Ready" or "Pairing"�