DTR-40.6 Basic Manual Advanced Manual found here http://integraworldwide.com/manual/dtr406upg/adv/en.
Before Start Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.
Step 1: Connections Personal computer HDMI IN HDMI OUT To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See the section 2 "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI cable HDMI OUT HDMI OUT HDMI OUT Game console 1 Set-top box/Digital video recorder, etc. Connecting the TV and players Important: The power cord must be connected only after all other connections are completed.
Step 1: Connections then Home on the remote controller, select "Setup" "1. Input/Output Assign" - "Monitor Out" and set the default value of "MAIN" to "SUB" or "MAIN+SUB". With the sub output, the operation screen for Internet function or USB playback can be displayed. It is also possible to use the multi-zone function with this jack. For details, see the section 5 "Using the multi-zone function" of "Step 3: Playing Back".
Step 1: Connections 2 8F Connecting speakers Surround back R/ Height R " Front R Front L $ Speaker layout F # " 79 Surround back L/ Height L If there is only one surround back speaker, connect it to the BACK or HEIGHT L terminal. Center 9 ' # & $ % 8 7 ' Subwoofer with built-in power To enjoy the Dolby Atmos listening mode, Surround back speakers or Height speakers need to be installed. The example above uses front Height speakers.
Step 1: Connections Characteristics of speaker types "# output front stereo sound. $ outputs center sounds such as dialogs and vocals. %& create back sound field. ' reproduces bass sounds and creates rich sound field. Connecting 78 speakers or 9F speakers enables playback in 7.1 ch configuration. 78 speakers improve sense of envelopment created by back sound field as well as seamlessness of back sounds, providing more natural sound experiences in the sound field.
Step 1: Connections Using Dolby Enabled Speakers 3 Network connection Other connections You can enjoy Internet radio and DLNA by connecting the unit to LAN. Connect the Ethernet cable to the Ethernet port of the router. AM/FM antenna connections Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception.
Step 2: Setting Up Important: When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN jack of the unit via HDMI connection. 1 Turning the power on Connect the power cord to the outlet. Press zOn/Standby on the main unit or zReceiver on the remote controller to turn the unit on or to standby mode.
Step 2: Setting Up 2. After placing the microphone at the measurement position, select "Do it Now" in the start screen and press Enter. 3. When "Please plug microphone that came in a box with AV receiver." is displayed, connect the microphone to the Setup Mic jack of the unit. Setup Mic jack Speaker setup microphone 4. Follow the guidance displayed on the TV screen. 6. When the measurement is completed, the measurement result is displayed. Press W/X on the remote controller to check the settings.
Step 2: Setting Up 3rd Step : Remote Mode Setup Exiting the setup wizard After finishing the initial setup, keep "Finished" selected and press Enter on the remote controller. Connection and setting of the unit is now completed. See Step 3 and enjoy your home theater.
Step 3: Playing Back 1 Playing the player and TV 1 7 8 Remote controller parts name 1 zReceiver button: Turns the unit on or into standby mode. 2 Remote Mode/Input Selector button: Switches the input to be played. 2 3 Cursor buttons and Enter button: Moves the cursor 9 F z To control the unit: The remote controller of this unit has the remote mode function for controlling other devices.
Step 3: Playing Back Listening modes You can select a listening mode from various options such as Dolby Atmos, Dolby Digital and DTS. Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. Movie/TV: You can select a listening mode suitable for movies and TV programs. Music: You can select a listening mode suitable for music. Game: You can select a listening mode suitable for games.
Step 3: Playing Back 3 Using the HOME menu In the HOME menu, you can make advanced setup and use Internet radio and DLNA function. For details on the operation, see the Advanced Manual. 1. After pressing Receiver, press Home on the remote controller. The HOME menu is displayed on the TV screen. You can also use the Home button on the main unit. HOME Setup 2. Select the item with the cursor buttons of the remote controller and press Enter to confirm your selection.
Step 3: Playing Back AccuEQ Room Calibration: Disables the sound field set in the automatic speaker setting. The setting can be separately set to each input. This setting cannot be selected if the automatic speaker setting has not been performed. It cannot be set if headphones are connected or the listening mode is Direct. Late Night: Make small sounds to be easily heard. It is useful when you need to reduce the volume while watching a movie late night.
Step 3: Playing Back z The sources from which you can enjoy the sound in a separate room: For Zone 2, any can be selected from among an external device connected to the HDMI input jacks (¼1) or the analog audio input jacks (¼2) of the unit, the "NET" or "USB" source, and the "AM" or "FM". For Zone 3, any can be selected from among an external device connected to the analog audio input jacks (¼2) of the unit, the "NET" or "USB" source, and the "AM" or "FM".
Step 3: Playing Back c. Connecting Speakers in a Separate Room It is possible to directly connect the speakers in another room without an amplifier. Connect the speakers in another room to the ZONE2 speaker terminals of the unit using speaker cables. Note that 5.2 ch will be the maximum (¼) in the main room during Zone 2 playback. Sound cannot be output from the Surround Back speakers, Height speakers and Wide speakers. ¼ In this case, the Dolby Atmos listening mode cannot be selected.
1 K L 2 M 3 4 N 5 6 7 O 8 9 F G (Australian models) H I J P Q R Front Panel 1 zOn/Standby button: Turns the unit on or into standby 2 3 4 5 6 7 8 mode. Hybrid Standby indicator: Stays lit if the unit enters standby when the HDMI Through and network standby are enabled. Tone and Tone Level buttons: Adjusts the high tone and low tone. Remote control sensor: Receives signals from the remote controller. Display Listening Mode buttons: Allows you to select the listening mode.
1 2 3 4 5 6 7 8 9 F 1 23 4 5 6 9 7 8 Display 1 Stays lit in the following conditions. G H I J K L M Rear Panel 1 RI REMOTE CONTROL jack: An Onkyo product with RI 2 3 4 5 6 7 jack can be connected and synchronized with this unit. : The supplied antennas are connected. COMPONENT VIDEO IN/OUT jacks: Component video input/output jacks. ETHERNET port: Used for LAN connection. RS232 port: Connected to the home control system.
Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Specifications Amplifier Section Tuner Section Rated Output Power All channels: 110 watts minimum continuous power per channel, ! # $ %& $ '%& * maximum total harmonic distortion of 0.08% (FTC) 125 watts minimum continuous power per channel, 6 ohm loads, ! 9 '%& * ; < of 0.
Others License and Trademark Information Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. DISCLAIMER “MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL LLC in the United States and other counties.” InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries.
Integra Division of Integra Division of Integra Division of 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.integra.com.cn Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 http://www.integraworldwide.
