Owner's Manual

17
1 4 8 9 F H J2 5 7
M
K
L
Q RON
3 G I6
P
(Australian model)
(Australian models)
Front Panel
1 zOn/Standby button: Turns the unit on or into standby
mode.
2 Hybrid Standby indicator: Stays lit if the unit enters
standby when the HDMI Through and network standby
are enabled.
3 Tone and Tone Level buttons: Adjusts the high tone
and low tone.
4 Remote control sensor: Receives signals from the
remote controller.
5 Display
6 Listening Mode buttons: Allows you to select the
listening mode.
7 Dimmer button (North American models): Switches
the brightness of the display.
RT/PTY/TP button (Australian models): Can be used
when receiving the station transmitting text information.
8 Memory button: Registers or deletes a station.
9 Tuning Mode button: Switches the tuning mode.
F Display button: Switches the information on the display.
G Home button: Displays the HOME menu.
H Cursor buttons, Tuning
j l
button, Preset
d c
button and Enter button: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune into the station with Tuning
j l
or
select the registered station with Preset
d c
.
I Return button: Returns the display to the previous
state.
J Master Volume: Allows you to adjust the volume.
K Zone 2 button, Zone 3 button and Off buttons:
Controls the multi-zone function.
L Whole House Mode button and Off button: Controls
the WHOLE HOUSE MODE function to play the same
source in all the multi-zone connected rooms.
M Phones jack: Stereo headphones with a standard plug
are connected.
N AUX Input HDMI/MHL jacks: An HD video camera or
MHL-enabled mobile device is connected. It is possible
to send video and audio of an MHL-enabled mobile
device.
O Input selector buttons: Switches the input to be played.
P USB port: A USB storage device is connected so that
music files stored in it can be played.
Q AUX Input Video/Audio jacks: A video camera or such
other device is connected.
R Setup Mic jack: The supplied speaker setup
microphone is connected.