Owner's Manual

Advanced Settings
45
Setting Item Default Value Setting Details
NET Zone 2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
USB Zone 2 Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
7.Hardware Setup
Multi Zone
Setting Item Default Value Setting Details
Zone 2 Out Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 2 Maximum
Volume
Off Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Zone 2 Power On
Volume
Last Set the Zone 2 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
r You cannot set a higher value than that of
"Zone 2 Maximum Volume".
Zone 3 Out Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 3 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 3 Maximum
Volume
Off Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Zone 3 Power On
Volume
Last Set the Zone 3 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
r You cannot set a higher value than that of
"Zone 3 Maximum Volume".