DTR-40.7 Basic Manual The Basic Manual includes information needed when starting up and also instructions for frequently used operations. The Advanced Manual has more detailed information and advanced settings.
Features ●● Equipped with 7 ch amplifier ●● Supports playback in Dolby Atmos format which provides 360-degree placement and movement of sounds including overhead sound ●● Supports playback in DTS:X, which is DTS's nextgeneration object-based surround sound technology that includes height to deliver a fully-immersive listening experience to your living room ●● Dolby Surround listening mode expands 2 ch, 5.1 ch or 7.
1 23 4 5 6 7 8 9 F G H I J K (Australian models) L M N O P R Q Front Panel 1 zOn/Standby button: Turns the unit on or into standby G Display button: Switches the information on the 2 H I 3 4 5 6 7 8 9 F mode. Dolby Atmos indicator: Lights when playing Dolby Atmos. DTS:X indicator: Lights when playing DTS:X. Tone and Tone Level buttons: Adjust the high tone and low tone. Remote control sensor: Receives signals from the remote controller.
1 2 3 J K 4 5 6 7 8 L 9 F M G H I N Rear Panel 1 RI REMOTE CONTROL jack: An Onkyo product with RI 2 3 4 5 6 7 8 9 jack can be connected and synchronized with this unit. TUNER AM/FM (75Ω) terminal: The supplied antennas are connected. USB port: A USB storage device is connected so that music files stored in it can be played. USB devices can be supplied with power when connected with a USB cable.
1 23 4 5 6 7 9 8 Display 1 Lights in the following conditions. "Z2": Zone 2 output is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV input selector is selected. / "3D": Input signals are 3D. / "USB" (): When input is "NET" and USB is connected and selected. / "NET" (): "NET" input is selected and the unit is connected to the network.
Step 1: Connections Characteristics of speaker types 1 Connecting speakers Speaker layout F 9 # " $ ' & % H G "# output front stereo sound and $ output center sound such as dialogs and vocals. %& create back sound field. ' reproduces bass sounds and creates rich sound field. Connecting 78 speakers, 9F speakers or GH speakers enables playback in 7.1 ch configuration.
Step 1: Connections and the other type is designed to be integrated with normal speakers. Dolby Enabled Speakers placed with their diaphragms facing toward the ceiling create higher effect in the Dolby Atmos and Dolby Surround listening modes by providing sounds echoing off the ceiling. You can select (g)(h) or (i)(j) on the unit. For connection with the unit, use the SPEAKERS BACK or HEIGHT terminals.
Step 1: Connections Instructions on how to connect speakers Cut and remove the plastic coating from the end of the speaker cable, twist the core and connect it to the terminal. Be sure to make correct connection between the unit's jacks and speaker's jacks (+ to + and - to -) for each channel. If connection is wrong, a bass sound may become poor due to reverse phase. Up to two subwoofers with builtin power amplifier can be connected to the SUBWOOFER jacks.
Step 1: Connections 2 Connecting the TV and players TV HDMI IN HDMI OUT To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2 Source Connection" of "Step 2: Initial Setup". Game console HDMI OUT HDMI OUT HDMI cable Blu-ray Disc/ DVD player HDMI OUT HDMI OUT Satellite/Cable set-top box, etc.
Step 1: Connections modify the settings to enable the input selection link with CEC (Consumer Electronics Control) compliant device, connection with ARC compatible TV, and HDMI Standby Through function. See "2 Source Connection" of "Step 2: Initial Setup". ●● Another TV can be connected to the HDMI OUT SUB jack. However, only the HDMI OUT MAIN terminal supports CEC functions such as ARC. ●● To enjoy HDCP2.
Step 1: Connections Network connection 3 Other connections You can enjoy Internet radio, DLNA and AirPlay by connecting the unit to LAN. Connect the Ethernet cable to the Ethernet port of the router. AM/FM antenna connections Connect the antennas to listen to AM/FM broadcast. When listening to the broadcast for the first time, adjust the antenna position and orientation to get the best reception.
Step 2: Initial Setup "Initial Setup" automatically starts on the TV when you first turn the unit on. Initial Setup Language Select Before Start Setup is performed as a series of responses to questions asked by the unit. Select the item with the cursors of the remote controller and press Enter to confirm your selection. To return to the previous screen, press Return. ●● Switch the input on the TV to that assigned to the unit.
Step 2: Initial Setup ¼¼ The subwoofer sound may not be detected since it is extremely low frequencies. Set the subwoofer volume to around the half of its maximum volume. ¼¼ Measurement may be interrupted if there is ambient noise or radio frequency interference. In this case, close the window and turn off the home appliance and fluorescent light. 2. After placing the microphone at the measurement position, select "Do it Now" with the cursors and press Enter. 3.
Step 2: Initial Setup 4 Network Connection Source Connection The following CEC-compatible devices are found; Do you wish to turn on the CEC link? ONKYO PRIVACY STATEMENT To improve our products and services of Onkyo Corporation, Onkyo may collect information about your receiver usage. To know more about what type of information we collect and xxxxxxxxxxx how we use it please review Onkyo’s Privacy Policy at http://www.onkyo.
Step 3: Playing Back 1 Basic Operations 1 z Receiver button: Turns the unit on or into standby Part names and functions of the remote controller mode. 2 RCV button: Switches the remote controller to the mode for operating this unit. 1 3 Remote Mode/Input Selector buttons: Switch the input to be played. Furthermore, by registering a particular remote control code to a button, you can switch the remote control mode to operate other equipment by pressing that button.
Step 3: Playing Back 2 Network Functions You can enjoy sources such as Internet radio by connecting the unit to a network. For details on the operation, see the Advanced Manual. ●● OSDs (the feature to show information such as setting menus on the TV) are not displayed when the OSD language is set to Chinese. Operate by confirming the display on the main unit. ●● This unit needs to be connected to the same router as a computer or NAS device.
Step 3: Playing Back 4 AM/FM Radio The Basic Manual explains the method using automatic tuning. For manual tuning, see the Advanced Manual. 1. Press Tuner on the main unit several times to select either "AM" or "FM". 2. Press Tuning Mode on the unit, so that the "AUTO" indicator on the display lights. 3. Press Tuningjl on the unit. The automatic tuning to a radio station starts. Searching stops when one is tuned. When tuned into a radio station, the "cTUNEDd" indicator on the display lights.
Step 3: Playing Back 5 Multi-zone You can listen to audio in a room (called Zone 2) other than the one where this unit is located (called the main room). Sources you can playback ●● External players (1) ●● NET (2) ●● AM/FM Radio 1 Only analog and 2ch PCM audio signals can be output to Zone 2. 2 DSD and Dolby TrueHD audio signals cannot be output to Zone 2. Making Multi-zone Connection There are the following two methods of connection: a.
Step 3: Playing Back Performing Multi-zone Playback It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room. It is also possible to perform playback only in a separate room. ●● With external players, it is possible to play the same source or different sources in the main room and separate room.
Step 3: Playing Back Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy compressed files such as MP3 will be improved. The setting can be separately set to each input selector. ●● The setting is effective in the signals of 48 kHz or less. The setting is not effective in the bitstream signals. ●● It cannot be set if the listening mode is Direct. Late Night: Make small sounds to be easily heard.
Others Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Others Specifications Amplifier Section Rated Output Power (North American) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 110 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output. Surround Mode Output Power () (6 ohms, 1 kHz THD 0.9%) 175 W per channel ¼¼ Reference output for each speakers. Depending on the source and the listening mode settings, there may be no sound output.
Others Table of image resolutions Resolutions supported by HDMI Refer to the following table for information about the image formats and resolutions output by this unit in response to input signals Input HDMI Component Composite Output HDMI 4K 4K 1080p/24 1080p 1080i 720p 480p/576p 480i/576i 1080p 1080i 720p 480p/576p 480i/576i 480i/576i 1080p/24 1080p 1080i 720p 480p/576p Input support Content protection technology 480i/576i HDMI input IN1 to IN3 HDCP1.4 HDCP2.
Others Precautions For European Models Declaration of Conformity We declare, under our sole responsibility, that this product complies with the standards: –– Safety –– Limits and methods of measurement of radio disturbance characteristics –– Limits for harmonic current emissions –– Limitation of voltage changes, voltage fluctuations and flicker –– RoHS Directive, 2011/65/EU –– Hereby, Onkyo Corporation, declares that this DTR-40.
Others License and Trademark Information Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance. AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com.
Others GNU License Important Notice Regarding Software The software package installed in this product includes software licensed to Onkyo Corporation (hereinafter, called "Onkyo") directly or indirectly by third party developers. Please be sure to read this notice regarding such software.
Others To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
Others NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (3) libcurl COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2007, Daniel Stenberg, . All rights reserved.
Others mailto: moeller@gwdgv1.dnet.gwdg.de mailto: mogul@pa.dec.com mailto: tmoore@fievel.daytonoh.ncr.com mailto: kamal@whence.com mailto: derek@toybox.demon.co.uk mailto: d@hd.org mailto: Rainer.Pruy@informatik.uni-erlangen.de mailto: dirce@zk3.dec.com mailto: wsanchez@apple.com mailto: mrapple@quack.kfu.com mailto: jack@innovativeinternet.com mailto: schnitz@unipress.com mailto: shields@tembel.org mailto: pebbles.jpl.nasa.gov mailto: harlan@pfcs.com mailto: ken@sdd.hp.com mailto: ajit@ee.udel.
Others END OF TERMS AND CONDITIONS APPENDIX: How to apply the Apache License to your work. To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format.
En-31
Supplied Accessories How to use the remote controller Indoor FM antenna --- (1) Remote control sensor AV Receiver AM loop antenna --- (1) Remote controller (RC-901M) --- (1) Batteries (AA/R6) --- (2) Power cord --- (1) Speaker setup microphone --- (1) Batteries (AA/R6) Approx. 16 ft. (5 m) ¼¼ If you do not use the remote controller for a long time, remove the batteries to prevent leakage. ¼¼ Note that keeping consumed batteries inside may cause corrosion resulting in damage of the remote controller.
DTR-40.7 Advanced Manual The Basic Manual includes information needed when starting up and also instructions for frequently used operations. The Advanced Manual has more detailed information and advanced settings. CONTENTS Details on AM/FM reception 2 Tuning into a Radio Station 2 Presetting an AM/FM Radio Station 2 Using RDS (Australian models) 3 Playing Music Files on a USB Storage Device 4 Listening to Internet Radio 5 About Internet Radio 5 TuneIn Radio 5 PandoraR–Getting Started (U.S.
Details on AM/FM reception Tuning manually Details on AM/FM reception Tuning into a Radio Station Tuning automatically 1. Press Tuner on the main unit several times to select either "AM" or "FM". 2. Press Tuning Mode so that the "AUTO" indicator on the display goes off. 1. Press Tuner on the main unit several times to select either "AM" or "FM". 2. Press Tuning Mode so that the "AUTO" indicator on the display lights. 3. Press Tuning to start automatic tuning.
Details on AM/FM reception 4. Press Memory again to register the station. ●● When the station is registered, the preset number stops flashing. ●● Repeat this procedure for all of your favorite AM/FM radio stations. Selecting a Preset Radio Station 1. Press CH +/- on the remote controller to select a preset number. ●● Alternatively you can press Preset on the main unit. You can also select by directly entering the preset number with the number buttons on the remote controller.
Details on AM/FM reception / Playing Music Files on a USB Storage Device 3. Press Enter to search the radio stations of the selected type. 4. When such a radio station is found, the indication on the display flashes. Then, press Enter again. ●● If no stations are found, the message "Not Found" is displayed. Listening to Traffic Information (TP) 1. Press RT/PTY/TP on the main unit three times. ●● "[TP]" will be displayed if traffic information is transmitted by the radio station you are tuned in.
Listening to Internet Radio Listening to Internet Radio About Internet Radio ●● The USB port of this unit conforms with the USB 1.1 standard. The transfer speed may be insufficient for some content you play, which may cause some interruption in sound. The unit comes preset with Internet radio stations such as TuneIn Radio for you to enjoy these services, just by connecting the unit to the Internet. ●● Network services or contents may become unavailable if the service provider terminates its service.
Listening to Internet Radio Regarding the TuneIn Radio Menu New Zealand only) To display the TuneIn menu, press Menu or Enter while playing a radio station. Selecting the corresponding menu item with the cursors and pressing Enter allows you to perform the following operations: Pandora is a free, personalized Internet radio service that plays the music you know and helps you discover music you’ll love. Add to My Presets: Registers the radio station or program being broadcast in "My Presets".
Listening to Internet Radio Why is this track playing?: Discover some of the musical attributes that Pandora uses to create your personal radio stations. I’m tired of this track: If you are tired of a track, you can put the track to sleep and Pandora will not play it for one month. Create station from this artist: Creates a radio station from this artist. Create station from this track: Creates a radio station from this track.
Listening to Internet Radio Playing Back 1. Press NET on the remote controller to display NET TOP screen. control the tracks with the buttons on the remote control. Enabled buttons: , , , Add to My Favorites: Adds a channel to My Favorites list. Add to Presets: Adds the currently playing station to presets list. Delete from Presets: Deletes the currently playing station from presets list. Network TuneIn Radio Pandora Spotify SiriusXM Internet Radio Slacker Personal Radio Deezer AirPlay 2.
Listening to Internet Radio 4. If there are no mistakes in the information you have entered, use / / / to select "OK" then press Enter. An account information confirmation screen appears. 5. If you do not have an account, select "Access without Sign In" and press Enter to use a restricted version of the service. Note that use will be restricted. ●● If you want to use multiple user accounts, see "Using Multiple Accounts". Login can be made from the "Users" screen. 6.
Listening to Internet Radio 4. Open the Internet browser on your PC or smartphone and enter the IP address of the unit in the URL field. ●● When using Internet Explorer, you can alternatively select "Open" in the "File" menu to enter the IP address. ●● Information of the unit is displayed on the browser. ("WEB Setup") 4. Select "Create new station" with the cursors and press Enter to display the keyboard screen. 5. Enter the name and URL of the radio station to add.
Playing Music with DLNA Configuring the Windows Media Player DLNA Playback Windows MediaR Player 11 ● Operation: You can set up by viewing the guidance displayed on the TV screen (OSD). Select the item with the cursor buttons of the remote controller and press Enter to confirm your selection. To return to the previous screen, press Return. ●● If the OSD language is set to Chinese, the operations in this section are not displayed on the TV. Operate by looking at the display on the main unit.
Playing Music with DLNA Controlling Remote Playback from a PC Network TuneIn Radio Pandora Spotify SiriusXM Internet Radio Slacker Personal Radio Deezer AirPlay 3. Select "DLNA" with the cursors and press Enter. 4. Select the target server with the cursors and press Enter to display the items list screen. ●● Searching does not work in servers that do not support search functions. ●● The unit cannot access pictures and videos stored on servers.
Playing Music with DLNA Playing Music Files in a Shared Folder About Shared Folder A shared folder is configured in a network device such as a PC or NAS (hard disk connected to your home network) for access from other users. You can play music files in a shared folder on your PC or NAS connected to the same home network as that of the unit. To play music files in a shared folder, you must first configure WindowsR 8 or WindowsR 7, Make sure the unit and PC or NAS device are connected to the same router.
Playing Music Files in a Shared Folder Network TuneIn Radio Pandora Spotify SiriusXM Internet Radio Slacker Personal Radio Deezer AirPlay 2. With the cursors, select "Home Media", and then press Enter. 3. With the cursors, select the target server, and then press Enter. ●● You can check the server name of your PC from the PC properties. 4. With the cursors, select the target shared folder, and then press Enter. 5. If a username and password is required, enter the necessary login information.
Operating Music Files with the Remote Controller Operating Music Files with the Remote Controller 3 4 About the Remote Controller 5 The remote controller of this unit allows you to play music files stored on USB storage devices, Internet radio, PCs and NAS devices on your home network. It also allows you to view information of the music file being played and perform various other operations. ●● Available buttons may vary depending on the service and device to play.
Using the Listening Modes Listening Mode Types Using the Listening Modes Selecting Listening Mode The listening modes allow you to select the best sound effect for your input source. 1. After pressing RCV on the remote controller, press one of the following four buttons. The unit allows you to enjoy audio in a variety of listening modes. This section lists the types of listening modes available on the unit and describes their functions.
Using the Listening Modes DTS-HD HR (DTS-HD High Resolution Audio) Mode suitable for playing sources recorded in DTS-HD High Resolution Audio. ●● This listening mode can be selected only if your Blu-ray Disc/DVD player is digitally connected to the unit or the player's output setting is bitstream. DTS-HD MSTR (DTS-HD Master Audio) Mode suitable for playing sources recorded in DTS-HD Master Audio.
Using the Listening Modes – THX Music: THX Music mode is tailored for listening to music, which is typically mastered at significantly higher levels than movies. In this mode, THX Loudness Plus is configured for music playback and only Timbre Matching is active. – THX S2 Cinema (THX Select2 Cinema): THX Select2 Cinema mode plays 5.1 movie using 7.1 ch giving you the best possible movie watching experience.
Using the Listening Modes Selectable Listening Modes Input Format Listening Mode Input Format Listening Mode Listening modes that can be selected with the listening mode buttons will differ depending on the input signal format and actual speaker configuration. Also note that depending on the player settings and content, some listening modes may not be available for selecting. ●● Listening modes available when headphones are connected are: Mono, Direct, and Stereo.
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DSD Direct Dolby D Direct Dolby D+ Direct Mono Mono Mono Dolby Surround Dolby D1 2 Dolby D+1 2 Neo:6 Cinema1 Dolby Surround Dolby Surround DTS Neural:X Neo:6 Cinema3 Neo:6 Cinema3 THX Cinema2 DTS Neural:X DTS Neural:X THX S2 Cinema THX Cinema 3 THX Surr EX THX S2 Cinema TV Logic THX Surr EX 3 Full Mono TV Logic 5 Input Format Listening Mode Dolby At
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Dolby TrueHD Direct DTS Direct DTS 96/24 Direct Mono Mono Mono Dolby TrueHD1 2 DTS1 2 DTS 96/241 2 Dolby Surround Dolby Surround Dolby Surround Neo:6 Cinema3 Neo:6 Cinema3 Neo:6 Cinema3 DTS Neural:X DTS Neural:X DTS Neural:X THX Cinema THX Cinema 4 THX S2 Cinema THX S2 Cinema 5 THX Surr EX THX Surr EX TV Logic TV Logic 5 THX Surr EX5 TV Logic6 6
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Express Direct DTS-HD HR Direct DTS-HD MSTR Direct Mono Mono Mono DTS Express1 2 DTS-HD HR1 2 DTS-HD MSTR1 2 Dolby Surround Dolby Surround Dolby Surround Neo:6 Cinema3 Neo:6 Cinema3 Neo:6 Cinema3 DTS Neural:X DTS Neural:X DTS Neural:X THX Cinema THX Cinema 4 THX S2 Cinema THX S2 Cinema 5 THX Surr EX THX Surr EX TV Logic TV Logic 5 En-22 THX Surr
Using the Listening Modes Input Format Listening Mode DTS-ES Direct Mono DTS1 ES Matrix2 Music button You can select a mode suitable for music.
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Direct DSD Direct Dolby D Direct Stereo Stereo Stereo Multich1 Dolby Surround Dolby D1 2 Dolby Surround Neo:6 Music1 Dolby Surround DTS Neural:X DTS Neural:X Neo:6 Music3 THX Music2 THX Music2 THX S2 Music Orchestra Orchestra 4 Studio-Mix Unplugged 4 Studio-Mix All Ch Stereo Unplugged6 Studio-Mix6 5 an only be selected when the input form
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Dolby D+ Direct Dolby TrueHD Direct DTS Direct Stereo Stereo Stereo Dolby D+1 2 Dolby TrueHD1 2 DTS1 2 Dolby Surround Dolby Surround Dolby Surround Neo:6 Music3 Neo:6 Music3 Neo:6 Music3 DTS Neural:X DTS Neural:X DTS Neural:X THX Music THX Music 4 THX S2 Music Orchestra Orchestra 6 Unplugged Studio-Mix Unplugged 6 Studio-Mix Orchestra6 6 Unplugged
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS 96/24 Direct DTS Express Direct DTS-HD HR Direct Stereo Stereo Stereo DTS 96/241 2 DTS Express1 2 DTS-HD HR1 2 Dolby Surround Dolby Surround Dolby Surround Neo:6 Music3 Neo:6 Music3 Neo:6 Music3 DTS Neural:X DTS Neural:X DTS Neural:X THX Music THX Music 4 THX S2 Music Orchestra Studio-Mix Unplugged 6 Studio-Mix Orchestra6 6 Unplugged6 6 Studi
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS-HD MSTR Direct DTS-ES Direct DTS:X Direct Stereo Stereo Stereo DTS-HD MSTR1 2 DTS1 DTS:X Dolby Surround ES Matrix2 Orchestra1 Neo:6 Music3 ES Discrete2 Unplugged1 DTS Neural:X Dolby Surround3 Studio-Mix1 DTS Neural:X All Ch Stereo2 THX Music 4 THX S2 Music Orchestra THX Music 5 Orchestra 6 Unplugged5 Studio-Mix Studio-Mix5 Full Mono6 Full M
Using the Listening Modes Game button You can select a mode suitable for games.
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DSD Direct Dolby D Direct Dolby D+ Direct Dolby Surround Dolby D1 2 Dolby D+1 2 DTS Neural:X Dolby Surround Dolby Surround THX Games1 DTS Neural:X DTS Neural:X THX S2 Games2 THX Games3 THX Games3 Game-RPG3 THX S2 Games4 THX S2 Games4 Game-Action Game-RPG Game-RPG5 Game-Rock 3 All Ch Stereo Full Mono Game-Action 3 Game-Sports 5 3 Game-Rock 4 Ga
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Dolby TrueHD Direct DTS Direct DTS 96/24 Direct Dolby TrueHD1 2 DTS1 2 DTS 96/241 2 Dolby Surround Dolby Surround Dolby Surround DTS Neural:X DTS Neural:X DTS Neural:X THX Games3 THX Games3 THX Games3 THX S2 Games4 THX S2 Games4 THX S2 Games4 Game-RPG Game-RPG Game-RPG5 5 Game-Action Game-Rock Game-Sports All Ch Stereo Full Mono6 T-D T-D 5 Game-Spo
Using the Listening Modes Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Express Direct DTS-HD HR Direct DTS-HD MSTR Direct DTS Express1 2 DTS-HD HR1 2 DTS-HD MSTR1 2 Dolby Surround Dolby Surround Dolby Surround DTS Neural:X DTS Neural:X DTS Neural:X THX Games3 THX Games3 THX Games3 THX S2 Games4 THX S2 Games4 THX S2 Games4 Game-RPG Game-RPG Game-RPG5 5 Game-Action Game-Rock Game-Rock 5 All Ch Stereo Game-Sports All C
Using the Listening Modes Input Format Listening Mode DTS-ES Direct DTS1 ES Matrix2 ES Discrete (DTS-ES Discrete)2 THX button Input Format Listening Mode All formats other than Dolby Atmos and DTS:X THX Cinema1 THX S2 Cinema2 DTS Neural:X THX S2 Music2 THX Games4 THX S2 Games2 Game-RPG5 Game-Rock5 Game-Sports5 All Ch Stereo6 Full Mono6 T-D an only be selected when the back speakers are not installed. C 2 Back speakers need to be installed.
Using the Listening Modes Operation Advanced Settings (Setup Menu) 1. Press RCV on the remote controller. ●● Always press RCV first to change the remote controller to RECEIVER mode (the mode to operate this unit) since its mode may be changed to operate another component. How to Set 5. With the / / / the settings. cursors, select the item to configure 1-1.
Advanced Settings (Setup Menu) 1. Input/Output Assign HDMI Input You can change input assignment between the input selectors and HDMI IN jacks. TV Out Select the HDMI jack to be connected with the TV. Make settings for the on-screen display function on the TV when you use the setting menu, for example. Setting Item Default Value Setting Details HDMI Out MAIN Select the HDMI jack to be connected with the TV.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Setting Item Default Value Setting Details TV ----- "HDMI 1 (HDCP 2.2)" to "HDMI 7": Assign a desired HDMI IN jack to the TV button. If you do not assign a jack, select "-----". To select an HDMI IN jack already assigned to another input selector, change its setting to "-----" first. PHONO ----- "COMPONENT 1", "COMPONENT 2": Assign the COMPONENT VIDEO IN jacks to the Phono button.
Advanced Settings (Setup Menu) Digital Audio Input 2. Speaker You can change input assignment between the input selectors and DIGITAL IN COAXIAL/ OPTICAL 1 to 2 jacks. If you do not assign a jack, select "-----". Setting Item Default Value Setting Details BD/DVD COAXIAL "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired DIGITAL IN jack to the BD/DVD button. CBL/SAT ----- "COAXIAL", "OPTICAL 1", "OPTICAL 2": Assign a desired DIGITAL IN jack to the CBL/SAT button.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Setting Item Default Value Setting Details Powered Zone 2 No Set the connection of speakers to Zone 2 speaker terminals. "Yes": When speakers are connected to ZONE2 speaker terminals "No": When speakers are not connected to ZONE2 speaker terminals ●● This item will be set to "No" when "Bi-Amp" is set to "Yes". Center 80 Hz(THX) Speaker Impedance 6ohms Set the impedance of the connected speakers.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Setting Item Default Value Setting Details Back 80 Hz(THX) Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output. ●● This cannot be selected in the following conditions.
Advanced Settings (Setup Menu) Level Calibration Setting Item Default Value Setting Details Adjust the level of each speaker with the built-in test tone. Settings are automatically configured if you use the Automatic Speaker Setup. Surround Left 0 dB Select a value between "-12 dB" and "+12 dB". A test tone will be output each time you change the value. Select the desired level. Subwoofer 0 dB Select a value between "-15 dB" and "+12 dB". A test tone will be output each time you change the value.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Setting item Default Value Setting Details Back 0 dB First select the frequency of the speaker from "25 Hz" to "16 kHz" with the / cursors, then use / to adjust the volume of the frequency between "−6dB" to "+6dB". ●● This cannot be selected if "Configuration" "Powered Zone 2" is set to "Yes" and Zone2 is set to on.
Advanced Settings (Setup Menu) Setting item Default Value Setting Details 3. Audio Adjust Loudness Plus On When the setting is set to "On", it is possible to enjoy even subtle nuances of audio expression at low volume. This is only available when the THX listening mode is selected. THX Loudness Plus THX Loudness Plus is a new volume control technology featured in THX Ultra2 Plus™ and THX Select2 Plus™ Certified receivers.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Volume Loudness Management On Enable the Late Night function that allows you to enjoy surround sound of Dolby TrueHD playback even in low volume. "On": Use this function "Off": Do not use this function Make the detailed volume setting of the unit. Setting Item Default Value Setting Details Volume Display Absolute Switch the volume display between the absolute value and relative value.
Advanced Settings (Setup Menu) Multi Zone Setting Item Default Value Setting Details Zone 2 Out Fixed Select which of the integrated amplifier in a separate room or this unit should be used to adjust the volume when Zone 2 is active. "Fixed": Adjust on the Integrated amplifier in a separate room "Variable": Adjust on the unit Zone 2 Maximum Volume Off Set the maximum value for Zone 2 to avoid too high volume. Select a value from "Off", "50" to "99".
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Audio Select BD/DVD: HDMI CBL/SAT: HDMI STRM BOX: HDMI PC: HDMI GAME: HDMI AUX: HDMI CD: OPTICAL TV: OPTICAL PHONO: Analog Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD" of HDMI IN jack and "BD/DVD" of AUDIO IN jack. You cannot select a jack that is not associated with the currently selected input.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details DTS/DTS-ES/ DTS-HD DTS Neural:X (before updating to a version that supports DTS:X audio: Straight Decode) Set the listening mode for playing digital audio signals in DTS and DTS-HD High Resolution formats. Select the listening mode specified for Blu-ray or such other DTS-HD Master Audio source. ●● Input signals are played as they are input if you select "Straight Decode".
Advanced Settings (Setup Menu) HDMI Setting Item Default Value Setting Details HDMI CEC (RIHD) Off Setting to "On" enables the input selection link and other link functions with HDMI connected CEC compliant device. "On": Use this function "Off": Do not use this function When changing this setting, turn off and then on again the power of all connected components. ●● Depending on the TV set, a link may need to be configured on the TV.
Advanced Settings (Setup Menu) Setting Item Default Value Audio TV Out (MAIN) Off Setting Details Setting Item Default Value Setting Details You can enjoy audio through the speakers of the HDMI connected TV while this unit is on. "On": Use this function "Off": Do not use this function ●● To select "On", set "HDMI CEC (RIHD)" to "Off". ●● The setting is fixed to "Auto" if "HDMI CEC" is set to "On".
Advanced Settings (Setup Menu) Power Management Setting Item Default Value Setting Details Sleep Timer Off Select to turn the unit into standby mode automatically when the specified time elapses. Select a value between "10 minutes" to "90 minutes". "Off": Select if you do not want the unit to automatically switch to standby. Auto Standby On/Off This setting places the unit on standby automatically after 20 minutes of inactivity without any video or audio input.
Advanced Settings (Setup Menu) Network Setting Item Default Value Setting Details Make the network setting. ●● When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable" and assign an address to this unit in "IP Address" as well as set information related to your LAN, such as Subnet Mask and Gateway. Friendly Name DTR-40.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details 12V Trigger A Usage Data No As a means of improving the quality of our products and services, Onkyo may collect information about your usage over the network. Select "Yes" if you agree to our collecting this information. Select "No" if you do not want us to collect this information. ●● You can set this after confirming the Privacy Policy. When you select "Usage Data" and press Enter, the Privacy Policy is displayed.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Setting Item Default Value Setting Details PC Main Set the 12V trigger output setting to each input. "Off": No output "Main": Output when "PC" is selected as input for main room. "Zone2": Output when "PC" is selected as input for ZONE2. "Main/Zone2": Output when "PC" is selected as input for main room or ZONE2. PHONO Main Set the 12V trigger output setting to each input.
Advanced Settings (Setup Menu) 12V Trigger B Setting Item Default Value Setting Details Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER OUT B jack. Different settings can be set for each input selector. You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. PC Zone2 Set the 12V trigger output setting to each input. "Off": No output "Main": Output when "PC" is selected as input for main room.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details 12V Trigger C PHONO Zone2 Set the 12V trigger output setting to each input. "Off": No output "Main": Output when "PHONO" is selected as input for main room. "Zone2": Output when "PHONO" is selected as input for ZONE2. "Main/Zone2": Output when "PHONO" is selected as input for main room or ZONE2. Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER OUT C jack.
Advanced Settings (Setup Menu) Setting Item Default Value Setting Details Setting Item Default Value Setting Details PC Main/Zone2 Set the 12V trigger output setting to each input. "Off": No output "Main": Output when "PC" is selected as input for main room. "Zone2": Output when "PC" is selected as input for ZONE2. "Main/Zone2": Output when "PC" is selected as input for main room or ZONE2. PHONO Main/Zone2 Set the 12V trigger output setting to each input.
Advanced Settings (Setup Menu) 7. Remote Controller 8. Miscellaneous Setting Item Default Value Setting Details Remote ID 1 Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Integra/Onkyo components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure. 1.
Operating Other Components with the Remote Controller Programming Remote Control Codes Operating Other Components with the Remote Controller Searching in the Setup Menu You can search a remote control code and register it to a desired Remote Mode button in the unit's Setup menu. 1. After pressing RCV on the remote controller, press Setup.
Operating Other Components with the Remote Controller Consulting the Remote Control Code List Remapping the Colored Buttons Resetting the Remote Mode Buttons Find the remote control code in the remote control code list. The colored button assignment on the AV receiver's remote controller can be remapped to match that on the remote controller of the component whose remote control code you programmed to Remote Mode. However, you will not be able to remap the colored buttons if Zone 2 is selected.
Operating Other Components with the Remote Controller TV operation F Press the Remote Mode button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons. Available buttons vary depending on the product category of the component. Operation may be incorrect or impossible depending on the product.
Operating Other Components with the Remote Controller VCR/PVR operation F Press the Remote Mode button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons. Available buttons vary depending on the product category of the component. Operation may be incorrect or impossible depending on the product.
Operating Other Components with the Remote Controller CD player operation To operate CEC-compatible components 7 Press the Remote Mode button programmed with the remote control code for the relevant AV component to switch the remote controller mode to that for the AV component. Then, operate by using the corresponding buttons. Available buttons vary depending on the product category of the component. Operation may be incorrect or impossible depending on the product.
Advanced speaker connections Advanced speaker connections ●● Before bi-amping, be sure to remove the shortcircuit connector that connects the tweeter (treble) jack and the subwoofer (bass) jack. ●● Use speakers supporting bi-amping only. For details, refer to the speakers' instruction manual. Connecting Bi-amp Speakers Connecting Dipole Speakers It is possible to connect speakers supporting bi-amping to improve quality of the bass and treble. Up to 5.1 ch will be played in bi-amping.
Connecting and Operating Onkyo RI Components Connecting and Operating Onkyo RI Components RI Connection and Setting About RI Function L Connecting an Onkyo component with RI jack such as the separately sold RI Dock to the unit by using an RI cable and an analog audio cable enables the following RI functions: R System On / Auto Power On: Starting playback on a component connected via RI when the unit is on standby mode, automatically turns on the unit to select the relevant component as its input sourc
Connecting and Operating Onkyo RI Components iPod /iPhone Operation R R The RI Dock allows you to use the AV receiver's remote controller to operate and play music on your iPod/iPhone. Moreover, it also allows you to view videos on your iPod/ iPhone on the screen of your TV, as well as perform RI operations if connected via RI. This operation is possible only when the RI remote control code is programmed.
Control Function between the Unit and External Component Control Function between the Unit and External Component You can enable the control functions between the unit and external devices using the terminals below. Special devices or cable connections are necessary to enable the functions. For more information about preparation, contact the specialized stores.
Firmware Update Updating the Firmware via Network Firmware Update About Firmware Update There are two methods for updating the firmware; via network and via USB. Use the one that best suits your environment. ●● For the latest information on updates, visit the Onkyo website. ●● Before updating, make sure that the speaker setup microphone is not connected.
Firmware Update Updating the Firmware via USB If an Error Message is Displayed When an error occurs, "*-** Error!" is displayed on the unit. ("*" represents an alphanumeric character.) Check the following: Error Code ●● *-01, *-10: Ethernet cable not found. Connect the Ethernet cable properly. ●● *-02, *-03, *-04, *-05, *-06, *-11, *-13, *-14, *-16, *-17, *-18, *-20, *-21: Internet connection error.
Firmware Update The Setup menu is displayed on the TV screen. Setup 1. Input/Output Assign 1. TV Out 2. Speaker 2.HDMI Input 3. Audio Adjust 3. Video Input 4. Source 4. Digital Audio Input 5. Listening Mode Preset 6. Hardware 7. Remote Controller 8. Miscellaneous If an Error Message is Displayed 6. With the cursors, select "8. Miscellaneous" - "Firmware Update" - "Update via USB", and then press Enter. Setup 1. Input/Output Assign 1. Firmware Update 2. Speaker 2. Initial Setup 3.
Troubleshooting mode. Troubleshooting Clear 2 Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Troubleshooting that support DVD, the default setting is off. ●● With some DVD-Video discs, you need to select an audio output format from a menu. One of the speakers produces no sound ●● Make sure that the polarity of the speaker cables is correct, and that no bare wires are in contact with the metal part of speaker terminals. ●● Make sure that the speaker cables are not shorting. ●● Make sure the speakers are configured correctly.
Troubleshooting ●● Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not support the resolution of the video input from the player. Change the setting on the player. ●● Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported. ●● Try switching off the DeepColor function.
Troubleshooting Multi-zone Function There is no zone output from the connected player ●● With multi-zone function, sound is output only when the signal input source is an external component connected to the digital audio input jacks or analog audio input jacks, "NET", "AM" or "FM". Multi-zone output is not possible if the player and the unit are connected via HDMI cable. Connect the player using a digital optical cable (OPTICAL), digital coaxial cable (COAXIAL), or RCA cable.
Troubleshooting measurement fails and the message "Ambient noise is too high." is displayed. ●● This can be caused by a malfunction in your speaker unit. Check if the unit produces normal sounds. The Late Night function does not work ●● Make sure the source material is Dolby Digital, Dolby Digital Plus, Dolby TrueHD, or DTS.
Reference Information Reference Information Linked Operation with CEC-compatible Components Link operation with a product conforming to the CEC of the HDMI standard. Note that linked operation is not always guaranteed with all CEC devices. Operation has been confirmed on the following devices (as of February 2015).
Reference Information Caution: ●● There are some content that can be played only with HDCP Rev. 2.2 compatible devices. To play such content, connect an HDCP Rev.2.2 compatible TV or player to the HDMI OUT MAIN/SUB jack or HDMI IN1 to 3 jacks of the unit. ●● The HDMI video stream (i.e., video signal) is compatible with DVI (Digital Visual Interface), so TVs and displays with a DVI input can be connected by using an HDMI-to-DVI adapter cable.
Reference Information ●● Sound files that are protected by copyright cannot be played. ●● When the USB audio player and this unit are connected, the audio player screen and the screen of the unit may be different. In addition, control functions of the audio player (classifying and sorting music files and adding information, etc.) are not available on this unit. ●● Do not connect a PC to the USB port of the unit. Inputting sound to the USB port of the unit from a PC is not possible.
Reference Information Remote Control Codes Amstrad Television (A to E) A.R.
Reference Information Coby Commercial Solutions Condor Conia Conrowa Contec Cosmel CPTEC Crosley Crown Crown Mustang Crypton Currys Essentials Curtis Curtis Mathes Cyberpix Daenyx Daewoo Dansai Dantax Datsura DAWA Daytek Daytron De Graaf Decca Dell Denver Desmet 13478, 12315, 13627 11447 10037 11498, 11523, 11687 10698 10037 10037 10625 10000 10037, 10714, 10208, 10672, 11037, 10668 10672, 10898 11667 12486 12855, 13577, 12466, 12352, 13895, 12397, 13636, 13382, 14035 10093 11667 10672 10634, 10037, 106
Reference Information GE GEC General Electric Genesis Genexxa GFM Gibralter Gibson Gintai Godrej GoGen Goldfunk GoldStar Goodmans Gorenje Gradiente Graetz Gran Prix Granada Grandin Grundig Grunkel En-78 11447, 10178, 10735, 10625, 10093, 11454 10037 11447, 10178, 10735, 10625, 10093, 11454 10037 10037 10171, 11864, 11886 10017 11826 11150 11585 12676, 11585 10668 10178, 10037, 10714, 13183, 11150 10037, 11037, 10634, 11667, 10668, 11523, 11585, 11687, 11983, 10714, 10556, 10625, 12426, 12676 11585, 1267
Reference Information Kioto Kiton KLL Kneissel Kolin Kolster Konig Konka Korpel Kosmos Kunlun Kuppersbusch L&S Electronic Lavis Leader Lecson Legend Lenco Leyco LG Liberton Liesenkotter Lifetec Linetech Linsar Lloyd Lodos 10556 10037, 10668 10037 10037, 10556 11610, 10150, 11755, 10037, 11150 10037 10037, 10512 12881, 13419, 10037, 10714 10037 10037 10208 12676 10714 11037 12876 10037 12397, 12309 12676, 11983, 10037, 11037 10037 11840, 11860, 11423, 12731, 12182, 12358, 10178, 12362, 13941, 12424, 10037,
Reference Information New Acoustic Dimension New Sonic New Tech Newave NEX Nexus Electronics Nikkai Nikkei Nikko Nimbro Noblex Nokia Norcent Nordmende Normerel Nortek Novatronic Novex Novita NPG 10037, 10178 11826 10037, 10556 10093, 10178, 11150 13861 12183 10037 12197, 10714 10178, 10017 12104 14029 10208 11365, 11589 13419, 13861, 10037, 10195, 11585, 13835, 10714, 11667 10037 10668 10037 11523 11585 13434 Okano OKI Olevia Omni Onei Onida En-80 Onn Opera Optimus Optoma Optonica Orava Orbit Orion Or
Reference Information Quelle Radiola Radiomarelli Radionette RadioShack Radiotone RCA Realistic Recco Reconnect Recor Rectiligne Red Star Reflex RefleXion Relisys Relon Remotec Reoc Revox RFT R-Line Roadstar 10037, 10512, 11037, 10195, 10668 10037, 10556 10037 10714 10178, 10037 10037, 10668, 11037 12746, 12434, 12932, 11447, 12247, 13577, 11781, 10625, 12187, 13382, 10679, 13332, 13717, 10093, 13793, 12183, 12855, 13419, 10000, 10178, 10618, 11454, 13426, 13636 10178 10898, 13183 13183 10037 10037 10037
Reference Information Soyo Spectroniq Squareview SR Standard Starion Starlite STI Strato SunBriteTV Sunic Line Sunkai Sunny Sunstar Sunstech Sunwood Superior Superscan Supersonic SuperTech Supra Supreme SVA Svasa Swisstec Sylvania Symphonic Synco Syntax Sysline 11826 11498, 11687 10171 10037, 11037 11037 10037 13793 10037 12337, 12528, 11610 10037 10037, 11523 10037 10037 12676 10037 11585 10093, 10171 10208, 11753, 12104 10037, 10556 10178 10000 11498 10208 12106, 12104 10171, 11864, 11886, 11394 10171, 1
Reference Information Venturer Vestel Vexa Victor Videocon Videoseven VideoSystem Vidikron Vidtech Viewsonic Viore Visa Vision VisionPlus Visual Innovations VIZIO Vortec Voxson VU Walker Waltham Wansa Wards 13005 11037, 11585, 10037, 12676, 10668, 11667 10037 11428, 10000, 10093, 10150, 11150, 10650, 10653 10508, 10037 11755 10037 10735 10178 12014, 12745, 12087, 13706, 11755, 11627, 12049, 11365 12352, 13382, 13118, 13429, 12104 10037 11826, 10037 12426, 12106 12106 11758, 13758, 12707, 12757, 13415, 1
Reference Information Aiwa Akai Akura Alba Amitech Amphion MediaWorks Amstrad AMW Ansonic Anthem Anthem Statement Aristona Arrgo AS ASDA Audio Authority Audix Autovox Awa Axion Basic Line Beko Bel Canto Design Belson Berthen Best Buy Black Diamond Blu:sens Blue Parade Blue Sky Brainwave Brandt Bush Byd:sign California Audio Labs Cambridge Audio CCE En-84 30533 32966, 30770, 31233, 30675 31233 32966, 30713, 30539, 30730 30770 30872 30713, 30770, 32139 30872 30831 32820 32820 30539, 30646 31023 30730, 30713
Reference Information Kansas Technologies Kendo Kennex Kenwood KeyPlug Kiiro KingVision Kuppersbusch Leiker Lenco Lenoxx Lexicon LG Lifetec Linetech Linsar LM Lodos Loewe Logik Lumatron Lunatron Luxman Luxor Magnavox Manhattan Marantz Mark Marquant Matsui Maxim MBO McIntosh MDS Mecotek 31233 30713, 30831 30713, 30770 30534, 30490 31643 30770 31643 32966 30872 30713, 30770 32213 32545 30741, 32811, 31602, 30591, 31233 30831 32966 32966 31643 30713 30741, 30539 30713 30713, 30741 30741 30573 32966, 30713 3
Reference Information SM Electronic Smart Sonashi Soniq Sony Sound Color Soundwave Spectra SR Standard Sunkai Sunstech Superior Supratech SV2000 Sylvania Symphonic Sytech Tandberg Targa Tascam Tatung TBoston Tchibo TCM Teac Technica Technical Technics Technika Technosonic TechnoStar Techwood Telefunken En-86 30730 30713 30831 30831 31516, 31633, 30533, 31033, 30864, 31070, 31548, 32861, 31536, 32839, 32180, 30772 31233 30713 30872 30831 30770 30831, 32139, 32966 31643 32139 30675 30675, 30630 30675 3083
Reference Information Go Video GPX Hitachi Humax Insignia Irradio JVC LG Loewe Magnavox Medion NEC Panasonic Philips Pioneer Pye RCA Samsung Schneider Sharp Silva Schneider Sony Sylvania Targa Tchibo TCM Thomson Toshiba Universum 30741 30741 31664 30646 32095 30646 30623, 32612 30741 30741 30675, 30646, 31506 30741 30741 30490, 31579, 33580, 32710, 32859, 32523 30646, 31340, 31506, 32334, 30539, 32056 30631 30646, 30675 30522 31635, 32942, 33195, 32107, 30490, 32069, 32489 30646 33313, 30630, 30675, 30
Reference Information China Telecom China Unicom Chongqing Cable Chongqing Cable Networks CHT Chunghwa Cincinnati Bell Cisco Citycable CJ CJ Digital CJ HelloVision Claro ClubInternet CMA Communications CMB CMBTV CNS Cogeco Com Hem Comcast En-88 04196, 02913, 03937 04366, 04196 03954 03954 03647, 01917 03647, 01917 01877, 01376 01877, 00858, 03028, 01982, 02132, 02345, 02589, 01883, 01998, 01582, 02047, 02378, 02563, 02401, 02742, 03265, 02271, 02947, 03452 03451, 03477 03322, 02897, 02979, 03340, 03407,
Reference Information HyTV Hyundai Digital Technology HZRTV I-Cable i-CAN I-Digital IMBTVN INESA Innovative Systems Inotel Inter Mountain Cable 02979, 03340 03465 02960 01374 01585, 02437 03319, 02979 04106 03865 01898 02437 01877, 02479, 04079 Invitel 02437 InviTV 02437 iTSCOM 02703 ITV 02979, 03389, 04196, 03498 J:COM 01760, 02703, 03925, 01782, 02701, 02700, 02715, 02752, 03051, 03053 Jambox 02030 JBC 02979, 03322, 03340, 03849 JCN North 02703, 01760, 03474 Jerrold 00276, 00476 Jiangsu Cable Network 04
Reference Information PTCI PX QooK TV Qook-Skylife Qrix QuickLine Qwerty Qwerty.
Reference Information Vodafone Volia Volia Cable Voo VTR wasu Wave Broadband 02401 02493 02493 02742 01376 04034 01376, 00476, 02479, 04079 Wavevision 01376, 01877, 01982 Wbox 02832 WEHCO Video 01376 Welho 02832 WellAV 03479 01376, 00476, Westman Communications 02187 WideOpenWest 01376, 01877, 02187 Windjammer Cable 00476, 01376, 01877 WNC 03118 WOW! 01877, 01376, 00476, 02187, 02479 Xfinity 01376, 01982, 00476, 01877, 03560, 02187 Xuyi Radio & TV 02897 YBN 03322 YCV 02703, 01760 Youview 02994 Yunnan Broad
Reference Information Comag Comsat Comwell Continent Coship Cosmos TV Croner Crown Crypto Crystal Cyfra+ Cyfrowy Polsat Dantax Danystar DASAN D-box DCR Delta Denver Deutsche Telekabel Dgtec Dick Smith Electronics Dicra Digenius Digi Digi Raum Electronics Digi Romania Digiality Digihome DigiLogic DigiQuest Digital DigitAlb En-92 02797, 02026, 02458, 02813, 02308, 01413 01413 01956 01986 03787, 03790, 01672, 02525, 03574 01545 02813 01284 03012 03012, 01416 00853, 01409 02262, 02527, 00253, 00853 01626 02
Reference Information Grundig GVT Haier Hailo Hallo Handan Hanseatic Hauppauge HD Box HD+ HDT Hirschmann Hitachi Homecast Hornet HTS Huawei Huaxian Radio and Television Network Hubei Chutian Hubei Radio & Television Network Hughes Network Systems 00173, 00847, 02376, 01291, 02034, 00853, 02813, 01284, 01780, 02738, 03424, 00879, 01672, 02568, 03346 03789 02418 02289 01626 01780, 01957 01099, 01100 01672 02928 02797, 02443, 01429, 02569, 03095 01416, 01255, 03321 00173, 00299, 02026, 00740 02034, 01284 02
Reference Information Metronic Metz Micro Micro electronic Micromaxx Microstar Miraclebox Mitsai Morgan's Motorola Movistar MTEX Multichoice Murphy Mx Onda myfreeviewHD Mysat MySky Italia MySky New Zealand Nagra NanoXX NC+ NEOTION NET Netgem Netsat Neuf TV Neuling Nevir Next Next Level Nextvision NextWave En-94 01986, 02418, 02738, 01334, 01631, 01413, 01672, 01935, 02278 00173 02797, 02813 02308, 02813 00299 00299 02928 02738 02026 00869, 03110, 00856, 03469 02527, 02262, 02263 03539 00879, 02059, 02060
Reference Information Samsung Sansui Sanyo Sat Control Sat Industrie SAT+ SatCatcher Satforce Satplus SatyCon Schaub Lorenz Schneider Schwaiger Schwaiger CS Scott SCS Sedea Sedea Electronique SEG Sencor Servimat Set-One Shark Sharp Shaw Direct Sherwood Shinelco 03063, 00253, 01442, 01377, 02467, 01682, 01989, 03266, 00853, 01662, 02525, 03321, 03784, 03834, 03838, 01255, 01693 01545 01626 01300 01611 01409 01956 03374 01100 01631 02034, 02418 02842 01672, 01429, 02308, 02458, 01631, 02797, 02813, 00740,
Reference Information Telestar Televes Televisa TelkomVision Telsey TelSKY Telstra TELUS Tesla Tevion Thai Thomson Tiny Titan Tividi TiVo TivuSat T-Mobile TNT SAT Tokai Tonna Topfield Toshiba TPS Transparent Video Systems En-96 01100, 01099, 01334, 01197, 02540, 01195, 01351, 01626, 01672 01300, 01334 00887 04310 02738 02540 01356 00775 01626 02205, 01409, 01672, 02026, 02813 03573, 03539 01291, 01935, 01662, 00847, 00853, 01175, 02278, 01307, 02160, 02619, 03110, 03469 01672 02205 01429 01377, 01442 02
Reference Information hFX Howard Computers HP Hush iBUYPOWER iconBIT ICY Box iNext Iomega ISTAR JadooTV Keedox LG Linksys Magnavox Mede8er Media Center PC Micca Microsoft Mind Netgear NiveusMedia Northgate Omniverse Packard Bell Panasonic Philips Pivos PopBox Popcorn Hour RCA Ricavision Roku Seagate Sony Stack 9 Sumvision Systemax 01272 01272 01272 01272 01272 03350, 02709 03350 03350 02558 02260 02260 04442 03373 01272 03339 02709 01272 03669 01272, 01805, 04000 01272 03324, 04401, 03292 01272 01272 04421
Reference Information Arcam Audiolab Carver Denon Epworth Grundig Harman/Kardon Inkel JVC Kenwood Magnavox Marantz Myryad Onkyo Optimus Panasonic Philips Pioneer Polk Audio Radiola RCA Revox Sansui Sony Tascam Technics Thorens Universum Victor Wards Yamaha Receiver Integra Onkyo Audio - Accessory Apple Jamo En-98 40076 40029, 40229 40029 40076 40029 40029 40029 40070 40244 40070 40029 40029 40029 42157 40027 40229 40029, 40229 40027 40029 40029 40027 40029 40029 40243, 40170 73095 40229 40029 4002
Reference Information MHTC Minerva Networks MIO mio TV Mitsubishi Electric MM&G Enterprises MOD Motorola Movistar Moyo MTS MyLGTV Now TV NTT NU Telecom Numericable Oi TV Open IPTV Optimus Clix Orange Pace PCCW Philips Pioneer Telephone Portugal Telecom Primestar PrimeTel PrimeTV 01481, 01998, 02254, 02302, 02482 03118 02275, 02802 02275, 02802 03274 01481, 01998, 02302, 02482 03647, 01917 02378, 02437, 01998, 02030, 00858, 02952, 02275, 03916, 01585, 02401 01585, 03288 03611 01998, 03611, 01615, 01481, 01
Reference Information Minerva Networks Mitsubishi Electric MOD Motorola Movistar MTS NTT Numericable Oi TV Orange Pace Philips Portugal Telecom PrimeTel PT Qwerty Sagem Sagemcom Samsung SaskTel Scientific Atlanta Sky Austria Sky Deutschland SureWest Swisscom TalkTalk TCC TDC Telefonica En-100 03118 03274 03647 01998, 02437, 02378, 02952, 00858, 03916, 01585, 02030, 02401 01585 01998, 01615, 01481, 01898 03237, 03274 02436 03452, 03454, 04165 02407 00858, 01998, 03454, 02294, 02401 02378 02401 02437 02401
Reference Information IceCrypt ID Sat Indovision iNETBOX Intv Inverto Jaeger JVC Kamosonic Kaon Kathrein Labgear LaSAT LinkBox LogiSat Luxor M vision M7 Marusys Maspro Maximum Medion MegaSat Meo Mercury Micro Micro electronic Miraclebox Motorola Movistar Multichoice Mysat MySky Italia MySky New Zealand NEOTION Nova NTV Plus 04197, 02928 01334 01989 01237 04348 03095 02797 00775 02738 01300 02569, 01561, 03658, 00658 03424 00740 02957 02797, 02813 01935 03562 02631 02799, 03543 03099 01334, 02813 02797, 007
Reference Information Xoro Xtreme Xtrend Zehnder Ziggo Zircon 02738, 02813, 03422 01300 03320 03422, 03424, 01777, 02034, 00740 02443 02957 TV_DVD Combination AEG 12197, 12239 Affinity Akai Akura Alba Apollo Audiosonic Audiovox Azuki Baier Bauer Beko Black Diamond Blaupunkt Blue Sky BlueDiamond Bush Celcus cello Centrum Coby Crown Currys Essentials 13870, 13717 12676, 13067, 12197 12289, 11983, 12239 12676, 13005, 13067, 12104 12239 12104, 11983 11769 12239 12239 12197 12239 11037 12426 11037 12426 1
Reference Information Sencor Sharp Shinelco Shivaki Skyworth Soniq Sontech Sony Soundwave SOVOS Supersonic Swisstec Sylvania Tauras Teac Technica Technical Technika Techwood Telefunken Teletech Tesco Tevion Thomson Toshiba TVE UMC United VD-Tech Venturer Vestel Viewsonic 12197 10818, 12676, 12360 12104 12197 12963 12493, 13005 11983 12778, 10000 11037, 12673 12239 11753, 12104 12106, 12104 11886, 11864, 11394, 10171 12197 10698, 11983, 13005 11037, 12426 12676 12426, 12197, 12106, 11983, 13005 12676 12239,
Integra Division of 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.integra.eu Integra Division of 302, Building 1, 20 North Chaling Rd., Xuhui District, Shanghai, China 200032, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.integra.com.
