Owner's Manual

Advanced Settings (Setup Menu)
En-42
Setting Item Default Value Setting Details
Loudness
Management
On Enable the Late Night function that allows
you to enjoy surround sound of Dolby TrueHD
playback even in low volume�
"On": Use this function
"Off": Do not use this function
Theater-Dimensional
Make the settings for Theater-Dimensional listening mode�
Setting Item Default Value Setting Details
Listening Angle Wide To enhance the effect of Theater-Dimensional,
select the actual angle of the left and right
front speakers as it appears from the listening
position�
"Narrow": Less than 30°
"Wide": Greater than 30°
● Position the front speakers 20° to the listening position if you have selected "Narrow" in "Listening
Angle" and 40° if you have selected "Wide"�
LFE Level
Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel and PCM�
Setting item Default Value Setting Details
Dolby D/Dolby D+/
TrueHD
0dB Select the low-frequency effect (LFE) level of
each type of signal from "0dB" to "-∞dB". If the
low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
DTS/DTS-ES/DTS-
HD
0dB Select the low-frequency effect (LFE) level of
each type of signal from "0dB" to "-∞dB". If the
low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
● This setting works on LFE channel volume of
DTS, DTS-ES, DTS-HD High Resolution and
DTS-HD Master Audio sources�
Other Multich Source 0dB Select the low-frequency effect (LFE) level of
each type of signal from "0dB" to "-∞dB". If the
low-frequency effect sound is too strong, select
"-20dB" or "-∞dB".
● This setting works on LFE channel volume of
Multichannel PCM�
Volume
Make the detailed volume setting of the unit�
Setting Item Default Value Setting Details
Volume Display Absolute Switch the volume display between the absolute
value and relative value� The absolute value 82 is
equivalent to the relative value 0dB�
"Absolute": Absolute value such as "1" to "99"
"Relative": Relative value such as "-81dB" and
"+18dB"
● If the absolute value is set to 82, "82Ref" will
appear on the display�
Muting Level -∞dB Set the volume lowered from the listening volume
when muting is on�
Select a value from "-∞dB", "-40dB" to "-20dB".
(in 10dB increments)
Maximum Volume Off Set the maximum value to avoid too high volume�
Select a value from "Off", "50" to "99"�
Power On Volume Last Set the volume level of when the power is turned
on� Select a value from "Last" (Volume level
before entering standby mode), "Min", "1" to "99"
and "Max"�
● You cannot set a higher value than that of
"Maximum Volume"�
Headphone Level 0 dB Adjust the output level of the headphones�
Select a value between "-12 dB" and "+12 dB"�