Owner's Manual

Zone 2 Video Output

The AV receiver features a composite video output for con-

nection to a TV in Zone 2, so you can enjoy both audio and

video in that zone.

Note

• If you use the COMPONENT VIDEO ZONE 2 OUT, you

must set the “Zone 2 Component Out” setting to “Use” (➔ 80).

•The COMPONENT VIDEO ZONE 2 OUT outputs video only

from components connected to component video inputs.

•The ZONE 2 OUT V jack outputs video from components con-

nected to composite video inputs.

Connecting Your Zone 3 Speakers to an

Amp in Zone 3

This setup allows 7.1-channel playback in your main lis-

tening room and 2-channel stereo playback in Zone 3,

with a different source in each room.

Note

• With the default settings, the Zone 3 volume must be set on the

Zone 3 amp. If your Zone 3 amp has no volume control, set the

“Zone 3 Out” setting to “Variab le ” so that you can set the

Zone 3 volume on the AV receiver (➔ 79).

Hookup

• Use a composite video cable to connect the AV receiver’s

ZONE 2 OUT V jack to a composite video input on your

Zone 2 TV.

• Alternatively, use a component video cable to connect the AV

receiver’s COMPONENT VIDEO ZONE 2 OUT jacks to a

component video input on your Zone 2 TV.

Main room

Zone 2

AV receiver

Connecting Zone 3

Hookup

• Use an RCA audio cable to connect the AV receiver’s

ZONE 3 PRE OUT L/R jacks to an analog audio input on

your Zone 3 amp.

• Connect your Zone 3 speakers to the speaker terminals on

your Zone 3 amp.

Main room

Zone 3

AV receiver

Receiver/

integrated amp