Owner's Manual

ManualsBrandsIntegra ManualsReceiversIntegra DTR-50.3

Note

• For composite video, S-Video, and component video

upconversion for the HDMI output, the “Monitor Out” setting

must be set to other than “Analog” (➔ page 44), and the

“HDMI Input” setting must be set to “-----”. See

“Connection Tips and Video Signal Path” for more information

on video signal flow and upconversion (➔ page 88).

• If no video component is connected to HDMI output (even if the

HDMI input is assigned), the AV receiver selects the video

source based on the setting of “Component Video Input”.

• When an HDMI IN is assigned to an input selector as explained

here, the same HDMI IN will be set as a priority in the “Digital

Audio Input” (➔ page 46). In this case, if you want to use the

coaxial or optical audio input, make the appropriate selection in

the “Audio Selector” setting (➔ page 57).

•The “TUNER” selector cannot be assigned and is fixed to the

“-----” option.

•“AUX” is used only for input from the front panel.

• Do not assign an HDMI IN to the TV/CD selector while “HDMI

Control(RIHD)” is set to “On” (➔ page 60), otherwise

appropriate CEC (Consumer Electronics Control) operation will

not be guaranteed.

• If you assign “-----” to an input selector that is currently

selected in “HDMI Through” (➔ page 60), the “HDMI

Through” setting will be automatically switched to “Off”.

• If you connect a component (such as UP-A1 Dock with docked

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot

assign any input to the “PORT” selector.

Component Video Input

If you connect a video component to a component video

input, you must assign that input to an input selector. For

example, if you connect your Blu-ray Disc/DVD player to

COMPONENT VIDEO IN 2, you must assign “IN2” to

the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with a

component video cable, you can set the AV receiver so

that composite video and S-Video sources are

upconverted

and output by the COMPONENT VIDEO

MONITOR OUT

. You can set this for each input

selector by selecting the “-----” option.

This applies only when “Monitor Out” setting is set to

“Analog” (➔ page 44).

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,

TV/CD, PHONO, PORT

` IN1, IN2, IN3:

Select a corresponding component video input to

which the video component has been connected.

` -----:

Select if you are using HDMI output, rather than the

COMPONENT VIDEO MONITOR OUT, for the

output from composite video, S-Video, and

component video sources.

Note

• For composite video and S-Video upconversion for the

COMPONENT VIDEO MONITOR OUT, the “Monitor Out”

setting must be set to “Analog” (➔ page 44), and the

“Component Video Input” setting must be set to “-----”. See

“Connection Tips and Video Signal Path” for more information

on video signal flow and upconversion (➔ page 88).

• If not connected to the same output you have selected in the

“Monitor Out” setting, the “Monitor Out” setting will be

automatically switched to “Analog” (➔ page 44).

• If you connect a component (such as UP-A1 Dock with docked

iPod/iPhone) to the UNIVERSAL PORT jack, you cannot

assign any input to the “PORT” selector.

•The “TUNER” selector cannot be assigned and is fixed to the

“-----” option.

Digital Audio Input

If you connect a component to a digital audio input, you

must assign that input to an input selector. For example, if

you connect your CD player to the OPTICAL IN 1, you

must assign “OPTICAL1” to the “TV/CD” input

selector.

Here are the default assignments.

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,

TV/CD, PHONO, PORT

` COAXIAL1, COAXIAL2, COAXIAL3,

OPTICAL1, OPTICAL2:

Select a corresponding digital audio input to which

the component has been connected.

` -----:

Select if the component is connected to an analog

audio input.

Note

•When an HDMI IN is assigned to an input selector in “HDMI

Input” (➔ page 45), the same HDMI IN will be set as a priority

in this assignment. In this case, if you want to use the coaxial or

optical audio input, make the selection in the “Audio Selector”

(➔ page 57).

Input selector Default assignment

BD/DVD IN1

VCR/DVR - - - - -

CBL/SAT IN2

GAME IN3

PC -----

AUX -----

TV/CD -----

PHONO -----

PORT -----

OUT

Composite video, S-Video Component video

Input selector Default assignment

BD/DVD COAXIAL1

VCR/DVR COAXIAL2

CBL/SAT COAXIAL3

GAME OPTICAL1

PC -----

AUX FRONT (Fixed)

TV/CD OPTICAL2

PHONO -----

PORT -----