Owner's Manual
Table Of Contents
- Safety Information and Introduction
- Connections
- Turning On & Basic Operations
- Turning On/Off the AV Receiver
- Initial Setup
- Playback
- Playing the Connected Component
- Controlling Contents of USB or Network Devices
- Understanding Icons on the Display
- Playing an iPod/iPhone via USB
- Playing a USB Device
- Listening to vTuner Internet Radio
- Registering Other Internet Radio
- Changing the Icon Layout on the Network Service Screen
- Playing Music Files on a Server (DLNA)
- Remote Playback
- Playing Music Files on a Shared Folder
- Listening to AM/FM Radio
- Playing Audio and Video from Separate Sources
- Using Basic Functions
- Advanced Operations
- Controlling Other Components
- iPod/iPhone Playback via Onkyo Dock
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Codes
- Entering Remote Control Codes
- Remapping Colored Buttons
- Remote Control Codes for Integra/Onkyo Components Connected via RI
- Resetting the Remote Mode Buttons
- Resetting the Remote Controller
- Controlling Other Components
- Learning Commands
- Using Normal Macros
- Appendix

Connections
En-12
■ 7.1-channel playback
Select the speakers (surround back, front high, front wide) you want to use for 7.1-channel playback.
You can set which speakers you want to use by priority. See “Selecting Speaker Layout” (➔ page 47).
Surround
back left
Surround
left
Surround
right
Front high
left
Front high
right Front leftFront right Center
Front wide
right
Front wide
left
Surround
back right
■ 9.1-channel playback
By adding an external amplifier to the 7.1-channel
configuration shown on the left, you can enjoy 9.1-channel
playback.
Connect your power amplifier’s analog audio input jacks to
the AV receiver’s SB/FH/FW EXT AMP
*1
jacks with
audio cables. To use the SB/FH/FW EXT AMP jacks, you
must specify their channel with the “Preout to External
Amplifier” setting (➔ page 58).
You can set which speakers you want to use by priority.
See “Selecting Speaker Layout” (➔ page 47).
*1
SB···Surround Back, FH···Front High, FW···Front Wide
Surround back left/
Front high left/
Front wide left
Surround back right/
Front high right/
Front wide right
Power amplifier










