Owner's Manual
Table Of Contents
- Safety Information and Introduction
- Connections
- Turning On & Basic Operations
- Turning On/Off the AV Receiver
- Initial Setup
- Playback
- Playing the Connected Component
- Controlling Contents of USB or Network Devices
- Understanding Icons on the Display
- Playing an iPod/iPhone via USB
- Playing a USB Device
- Listening to vTuner Internet Radio
- Registering Other Internet Radio
- Changing the Icon Layout on the Network Service Screen
- Playing Music Files on a Server (DLNA)
- Remote Playback
- Playing Music Files on a Shared Folder
- Listening to AM/FM Radio
- Playing Audio and Video from Separate Sources
- Using Basic Functions
- Advanced Operations
- Controlling Other Components
- iPod/iPhone Playback via Onkyo Dock
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Codes
- Entering Remote Control Codes
- Remapping Colored Buttons
- Remote Control Codes for Integra/Onkyo Components Connected via RI
- Resetting the Remote Mode Buttons
- Resetting the Remote Controller
- Controlling Other Components
- Learning Commands
- Using Normal Macros
- Appendix
Turning On & Basic Operations
En-39
Input Source
The following audio formats are supported by the listening
modes.
Speaker Layout
The illustration shows which speakers are activated in each
channel. See “Speaker Configuration” for the speaker setup
(➔ page 58).
*1
Press Receiver followed by SP (speaker layout) repeatedly to
select the speakers you want to use: front high, front wide, or
surround back.
*2
After enabling the corresponding speakers, press Receiver
followed by SP (speaker layout) repeatedly to select the layout
you want to use. These layouts are only available when
“Preout to External Amplifier” (➔ page 58) is enabled.
A
This is mono (monophonic) sound.
S
This is stereo (stereophonic) sound. Two
independent audio signal channels are reproduced
through two speakers.
D
This is 5.1-channel surround sound. This surround
system has five main channels of sound and a sixth
subwoofer channel (called the point-one channel).
F
This is 7.1-channel surround sound. This is a
further sound enhancement to 5.1-channel sound
with two additional speakers that provide greater
sound envelopment and more accurate positioning
of sounds.
G
This is DTS-ES surround sound. This surround
system can produce a discrete or a matrix-encoded
sixth channel from existing DTS 5.1 encoded
material.
H
This is Dolby Digital EX surround sound. This
provides a center back surround channel from 5.1-
channel sources.
Listening mode buttons
SP (speaker layout)
Z
X
C
N
*1
B
b
V
M
*2
J
K
L