Owner's Manual
Table Of Contents
- Safety Information and Introduction
- Connections
- Turning On & Basic Operations
- Turning On/Off the AV Receiver
- Initial Setup
- Playback
- Playing the Connected Component
- Controlling Contents of USB or Network Devices
- Understanding Icons on the Display
- Playing an iPod/iPhone via USB
- Playing a USB Device
- Listening to vTuner Internet Radio
- Registering Other Internet Radio
- Changing the Icon Layout on the Network Service Screen
- Playing Music Files on a Server (DLNA)
- Remote Playback
- Playing Music Files on a Shared Folder
- Listening to AM/FM Radio
- Playing Audio and Video from Separate Sources
- Using Basic Functions
- Advanced Operations
- Controlling Other Components
- iPod/iPhone Playback via Onkyo Dock
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Codes
- Entering Remote Control Codes
- Remapping Colored Buttons
- Remote Control Codes for Integra/Onkyo Components Connected via RI
- Resetting the Remote Mode Buttons
- Resetting the Remote Controller
- Controlling Other Components
- Learning Commands
- Using Normal Macros
- Appendix
Turning On & Basic Operations
En-41
■ Listening Modes
Listening Mode Description Input
Source
Speaker
Layout
Direct In this mode, audio from the input source is
output without surround-sound processing.
The speaker configuration (presence of
speakers) and speaker distance settings are
enabled, but much of the processing set via
the audio setup is disabled. See “On-screen
Setup” for more details (➔ page 49).
A
S
D
F
G
H
ZXC
N
*1
M
Stereo Sound is output from the front left and right
speakers and subwoofer.
ZXC
NM
Mono Use this mode when watching an old movie
with a mono soundtrack, or use it with the
foreign language soundtracks recorded in the
left and right channels of some movies. It
can also be used with DVDs or other sources
containing multiplexed audio, such as
karaoke DVDs.
Multichannel This mode is for use with PCM multichannel
sources.
D
F
XCN
M
DSD
*2
In this mode, audio from the input source is
output without surround-sound processing.
The speaker configuration (presence of
speakers), crossover frequency, speaker
distance, A/V Sync and much of the
processing set via the audio setup are
enabled. See “On-screen Setup” for more
details (➔ page 49).
D XCN
M
Dolby Digital
Dolby Digital Plus
*3
D XCN
M
F XCN
*1
M
Dolby TrueHD
D XCN
M
F XCN
*1
M
Di rec t
Stereo
Mono
Mu l t i ch
DSD
Dolby D
Dolby D +
Dolby TrueHD
DTS In this mode, audio from the input source is
output without surround-sound processing.
The speaker configuration (presence of
speakers), crossover frequency, speaker
distance, A/V Sync and much of the
processing set via the audio setup are
enabled. See “On-screen Setup” for more
details (➔ page 49).
DXCN
M
DTS-HD High
Resolution Audio
DXCN
M
FXCN
*1
M
DTS-HD Master
Audio
DXCN
M
FXCN
*1
M
DTS Express
DXCN
M
DTS 96/24
*4
This mode is for use with DTS 96/24
sources. This is high-resolution DTS with a
96 kHz sampling rate and 24-bit resolution,
providing superior fidelity. Use it with
DVDs that bear the DTS 96/24 logo.
DXCN
M
DTS-ES Discrete
*5
This mode is for use with DTS-ES Discrete
soundtracks, which use a discrete surround
back channel for true 6.1/7.1-channel
playback. The seven totally separate audio
channels provide better spatial imaging and
360-degree sound localization, perfect for
sounds that pan across the surround
channels. Use it with DVDs that bear the
DTS-ES logo, especially those with a DTS-
ES Discrete soundtrack.
GV
J
K
DTS-ES Matrix
*5
This mode is for use with DTS-ES Matrix
soundtracks, which use a matrix-encoded
back-channel for 6.1/7.1-channel playback.
Use it with DVDs that bear the DTS-ES
logo, especially those with a DTS-ES Matrix
soundtrack.
GV
J
K
Listening Mode Description Input
Source
Speaker
Layout
DTS
DTS– HD HR
DTS– HD MSTR
DTS Ex p r e s s
DTS 96 / 24
ES iscreteD
ES a t r i xM