Owner's Manual
Table Of Contents
- Safety Information and Introduction
- Connections
- Turning On & Basic Operations
- Turning On/Off the AV Receiver
- Initial Setup
- Playback
- Playing the Connected Component
- Controlling Contents of USB or Network Devices
- Understanding Icons on the Display
- Playing an iPod/iPhone via USB
- Playing a USB Device
- Listening to vTuner Internet Radio
- Registering Other Internet Radio
- Changing the Icon Layout on the Network Service Screen
- Playing Music Files on a Server (DLNA)
- Remote Playback
- Playing Music Files on a Shared Folder
- Listening to AM/FM Radio
- Playing Audio and Video from Separate Sources
- Using Basic Functions
- Advanced Operations
- Controlling Other Components
- iPod/iPhone Playback via Onkyo Dock
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Codes
- Entering Remote Control Codes
- Remapping Colored Buttons
- Remote Control Codes for Integra/Onkyo Components Connected via RI
- Resetting the Remote Mode Buttons
- Resetting the Remote Controller
- Controlling Other Components
- Learning Commands
- Using Normal Macros
- Appendix
Controlling Other Components
En-83
Controlling Other
Components
You can use the AV receiver’s remote controller to control
your other AV components. This section explains how to
enter the remote control code for a component that you
want to control: DVD, TV, CD, etc.
See “Learning Commands” for learning commands
directly from another component’s remote controller
(➔ page 88).
See “Using Normal Macros” for programming Activities
to perform a sequence of remote control actions
(➔ page 89).
The following Remote Mode buttons are preprogrammed
with remote control codes for controlling the components
listed. You do not need to enter a remote control code to
control these components.
For details on controlling these components, see the
indicated pages.
You can look up for an appropriate remote control code
from the on-screen menu.
Preprogrammed Remote Control
Codes
BD/DVD Integra/Onkyo Blu-ray Disc player
(➔ page 86)
TV/CD Integra/Onkyo CD player (➔ page 85)
STB/DVR Apple TV
Looking up for Remote Control Codes
You need to connect your TV to the HDMI output
(HDMI OUT MAIN) to make the following on-screen
setting.
1
Press Receiver followed by Home.
2
Use e/r to select “Setup”, and then press Enter.
3
Use q/w to select “Remote Controller Setup”, and
then press Enter.
4
Use q/w to select “Remote Mode Setup”, and then
press Enter.
5
Use q/w to select a remote mode, and then press
Enter.
The menu of category selection appears.
6
Use q/w to select a category, and then press Enter.
The keyboard screen for brand name input appears.
7
Use q/w/e/r to select a character, and then press
Enter.
Repeat this step for the first three characters of the
brand name.
When you have entered the 3rd character, select
“Search” and press Enter.
A list of brand names is retrieved.
If the desired brand name is not found:
Use r to select “Not Listed”, and then press Enter.
The keyboard screen for brand name input appears.
8
Use q/w to select a brand, and then press Enter.
A remote control code with its instructions are
displayed. Follow the procedure.
9
If you can control the component, use q/w to select
“OK”, and then press Enter.
The on-screen menu returns to the “Remote Mode
Setup” front screen.
If you cannot control the component, use q/w to
select “Try Next Code” and press Enter.
The next code is displayed.