Owner's Manual

Controlling Other Components
En-86
Controlling MHL-Enabled Mobile Device
By programming the supplied remote controller with the
appropriate remote control code, you can use it to operate
your MHL-enabled mobile device.
Connect your MHL-enabled mobile device to the AUX
Input MHL jack. We advise you to program the remote
control code on the AUX button.
Use the following remote control codes:
(North American models)
` 33101:
MHL-enabled mobile device
(Australian models)
` 32910:
MHL-enabled mobile device
Note
• With some mobile devices, reliable operation cannot be
guaranteed.
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD is preprogrammed with the remote control code
for controlling a component that supports the p
*1
(limited to some models). The component must be able to
receive remote control commands via p and be
connected to the AV receiver via HDMI.
Use the following remote control codes:
` 32910/33101/33501/31612:
Blu-ray Disc/DVD player with p
*1
The p supported by the AV receiver is the CEC system
control function of the HDMI standard.
■ TV operation
■ Blu-ray Disc/HD DVD player operation
c
d
b
a
j
k
n
l
m
f
g
h
i
e
Press the appropriate REMOTE
MODE button first.
Press the appropriate Remote
Mode button first.
Available buttons
a 8, Input, TV VOL q/w g
Number: 1 to 9, 0
b
Guide
Number: +10
*1
c q/w/e/r
Enter
h
Display
j
Muting
d
Setup
k
CH +/–
e 1, 3, 2, 5, 4,
7, 6
*1
l
PREV CH
m
Return
f
A
(Red)
*1
n
CLR
B
(Green)
*1
C (Yellow)
*1
D (Blue)
*1
Available buttons
b
Top Menu
g
Number: 1 to 9, 0
c q/w/e/r
Enter
Number: +10
*1
h
Display
d
Setup
i 8Source
e 1, 3, 2, 5, 4,
7, 6
j
Muting
k
CH +/–
f
A
(Red)
Disc +/–
B
(Green)
l
Menu
C
(Yellow)
m
Return
D
(Blue)
n
CLR