Owner's Manual
Table Of Contents
- Important Safety Instructions
- Precautions
- Supplied Accessories
- Features
- Front & Rear Panels
- Remote Controller
- About Home Theater
- Connecting the AV receiver
- Connecting Your Speakers
- Bi-amping the Front Speakers
- Bridging the Front Speakers
- Connecting Passive Subwoofers
- Connecting Antenna
- About AV Connections
- Connecting Components with HDMI
- Connecting Both Audio & Video
- Which Connections Should I Use?
- Connecting a TV or Projector
- Connecting a DVD Player
- Connecting a VCR or DVD Recorder for Playback
- Connecting a VCR or DVD Recorder for Recording
- Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
- Connecting a Game Console
- Connecting a Camcorder or Other Device
- Connecting a CD Player or Turntable
- Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
- Connecting a Power Amplifier
- Connecting an RI Dock
- Connecting a Universal Port Option Series
- Connecting Integra/Onkyo RI Components
- Connecting the Power Cord
- Turning On the AV receiver
- First Time Setup
- Monitor Setup
- Selecting the Language used for the onscreen setup menus
- Using the Onscreen Setup Menus
- Using the Display to change the settings
- Monitor Out Setup
- Video Input Setup
- Digital Audio Input Setup
- Analog Audio Input Setup
- Speaker Settings
- TV Format Setup (Australian models)
- FM/AM Frequency Step Setup
- Changing the Input Display
- Audyssey MultEQ(R) XT Room Correction and Speaker Setup
- Basic Operations
- Listening to the Radio
- Universal Port Option UP-A1 Dock for iPod
- Recording
- Using the Listening Modes
- Advanced Setup
- NET/USB
- Multi Zone
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Code
- Entering Remote Control Codes
- Remote Control Codes for Integra/ Onkyo Components Connected via RI
- Resetting Remote Mode Buttons
- Resetting the Remote Controller
- Controlling a TV
- Controlling a DVD Player or DVD Recorder
- Controlling a VCR or PVR
- Controlling a Satellite Receiver or Cable Receiver
- Controlling a CD Player, CD Recorder or MD Recorder
- Controlling an RI Dock
- Controlling a Cassette Recorder
- Activities Setup
- Learning Commands
- Using Normal Macros
- Troubleshooting
- Specifications (DTR-70.1)
- Specifications (DTR-80.1)
- Video Resolution Chart
109
Advanced Setup—Continued
Theater-Dimensional
Listening Angle Wide: Select if the listening angle is greater than 30 degrees (default).
Narrow: Select if the listening angle is less than 30 degrees.
With this setting, you can optimize the Theater-Dimen-
sional listening mode by specifying the angle of the front
left and right speakers relative to the listening position.
LFE Level
With these settings, you can set the level of the LFE (Low Frequency Effects) channel individually for Dolby Digital,
DTS, multichannel PCM, Dolby TrueHD, DTS-HD Master Audio, and DSD sources.
If you find that low-frequency effects are too loud when using one of these sources, change the setting to –20 dB or
–Q dB.
Dolby Digital
*1
, DTS
*2
, Multich PCM
*3
, Dolby TrueHD
*4
, DTS-HD Master Audio
*5
, DSD
*6
The level can be set to –Q dB, –20 dB, –10 dB, or 0 dB (default).
Notes:
*1 Sets the level of the LFE channel for Dolby Digital and Dolby Digital Plus sources.
*2 Sets the level of the LFE channel for DTS and DTS-HD High Resolution sources.
*3 Sets the level of the LFE channel for multichannel PCM sources. (Multichannel PCM is input via HDMI.)
*4 Sets the level of the LFE channel for Dolby TrueHD sources.
*5 Sets the level of the LFE channel for DTS-HD Master Audio sources.
*6 Sets the level of the LFE channel for DSD (Super Audio CD) sources.
Direct
Analog
Subwoofer
This setting determines whether or not analog audio signals (bass signals) are output from front speakers when
the Direct listening mode is selected.
Off: Analog audio signals (bass signals) are not output (default).
On: Analog audio signals (bass signals) are output.
DSD
DAC Direct
This setting determines whether or not DSD (Super Audio CD) audio signals are passed through the DSP
processing when the Direct listening mode is selected.
Off: DSD signals are processed by the DSP (default).
On: DSD signals are not processed by the DSP.
Note:
Once you have selected “Yes”, only DAC Direct will be available for selection. “DSD Direct” will appear on
the display.
Front left speaker Front right speaker
Listening angle: 30°