Owner's Manual
Table Of Contents
- Important Safety Instructions
- Precautions
- Supplied Accessories
- Features
- Front & Rear Panels
- Remote Controller
- About Home Theater
- Connecting the AV receiver
- Connecting Your Speakers
- Bi-amping the Front Speakers
- Bridging the Front Speakers
- Connecting Passive Subwoofers
- Connecting Antenna
- About AV Connections
- Connecting Components with HDMI
- Connecting Both Audio & Video
- Which Connections Should I Use?
- Connecting a TV or Projector
- Connecting a DVD Player
- Connecting a VCR or DVD Recorder for Playback
- Connecting a VCR or DVD Recorder for Recording
- Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
- Connecting a Game Console
- Connecting a Camcorder or Other Device
- Connecting a CD Player or Turntable
- Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
- Connecting a Power Amplifier
- Connecting an RI Dock
- Connecting a Universal Port Option Series
- Connecting Integra/Onkyo RI Components
- Connecting the Power Cord
- Turning On the AV receiver
- First Time Setup
- Monitor Setup
- Selecting the Language used for the onscreen setup menus
- Using the Onscreen Setup Menus
- Using the Display to change the settings
- Monitor Out Setup
- Video Input Setup
- Digital Audio Input Setup
- Analog Audio Input Setup
- Speaker Settings
- TV Format Setup (Australian models)
- FM/AM Frequency Step Setup
- Changing the Input Display
- Audyssey MultEQ(R) XT Room Correction and Speaker Setup
- Basic Operations
- Listening to the Radio
- Universal Port Option UP-A1 Dock for iPod
- Recording
- Using the Listening Modes
- Advanced Setup
- NET/USB
- Multi Zone
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Code
- Entering Remote Control Codes
- Remote Control Codes for Integra/ Onkyo Components Connected via RI
- Resetting Remote Mode Buttons
- Resetting the Remote Controller
- Controlling a TV
- Controlling a DVD Player or DVD Recorder
- Controlling a VCR or PVR
- Controlling a Satellite Receiver or Cable Receiver
- Controlling a CD Player, CD Recorder or MD Recorder
- Controlling an RI Dock
- Controlling a Cassette Recorder
- Activities Setup
- Learning Commands
- Using Normal Macros
- Troubleshooting
- Specifications (DTR-70.1)
- Specifications (DTR-80.1)
- Video Resolution Chart
159
Controlling Other Components—Continued
Via onscreen menu, you can specify what actions will be
taken by the Easy macro command in the Easy macro
mode.
Activities Setup
1
Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select “8. Remote Con-
troller Setup”, and then press
[Enter].
The “Remote Controller Setup” menu
appears.
3
Use the Up and Down [q]/[w] but-
tons to select “2. Activities
Setup”, and then press [Enter].
The “Activities Setup” menu appears.
4
Use the Up and Down [q]/[w] but-
tons to select “My Movie”, “My
TV”, or “My Music”, and then
press [Enter].
My Movie: Actions for the
My Movie button is
changed.
My TV: Actions for the My TV
button is changed.
My Music: Actions for the
My Music button is
changed.
1. Remote Mode Setup
2. Activities Setup
8. Remote Controller Setup
My Movie
My TV
My Music
8–2. Activities Setup
5
Use the Up and Down [q]/[w] but-
tons to select an item, and use
the Left and Right [e]/[r] but-
tons to change the settings.
The items are explained below.
Source
DVD/BD, VCR/DVR, CBL/SAT,
Game, AUX1, AUX2, TV/Tape,
Tuner, CD, Phono, Port, Net/USB
With this setting, you can choose
the input source.
TV Power ON
Enable: TV to turn on “Enable”.
Disable: TV to turn on “Disable”.
This option enables the TV to turn
on when the Activities button is
pressed.
Source Power ON
Enable: Source to turn on
“Enable”.
Disable: Source to turn on
“Disable”.
This option enables the Source to
turn on when the Activities button
is pressed.
Receiver Power ON
Enable: AV receiver to turn on
“Enable”.
Disable: AV receiver to turn on
“Disable”.
This option enables the AV receiver
to turn on when the Activities but-
ton is pressed.
Receiver Source Change
Enable: AV receiver input
selector is change.
Disable: AV receiver input
selector is not change.
This option enables the AV receiver
input selector to change when the
Activities button is pressed.
8–2. Activities Setup
MY Movie
Source
TV Power ON
Source Power ON
Receiver Power ON
Receiver Source Change
Source Play
DVD/BD
Enable
Enable
Enable
Enable
Enable