Owner's Manual

ManualsBrandsIntegra ManualsReceiversIntegra DTR-70.1

Table Of Contents

Important Safety Instructions
Precautions
Supplied Accessories
Features
Front & Rear Panels
- Front Panel
- Display
- Rear Panel
Remote Controller
- Installing the Batteries
- Aiming the Remote Controller
- Controlling the AV Receiver
About Home Theater
- Enjoying Home Theater
Connecting the AV receiver
- Connecting Your Speakers
- Bi-amping the Front Speakers
- Bridging the Front Speakers
- Connecting Passive Subwoofers
- Connecting Antenna
- About AV Connections
- Connecting Components with HDMI
- Connecting Both Audio & Video
- Which Connections Should I Use?
- Connecting a TV or Projector
- Connecting a DVD Player
- Connecting a VCR or DVD Recorder for Playback
- Connecting a VCR or DVD Recorder for Recording
- Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
- Connecting a Game Console
- Connecting a Camcorder or Other Device
- Connecting a CD Player or Turntable
- Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
- Connecting a Power Amplifier
- Connecting an RI Dock
- Connecting a Universal Port Option Series
- Connecting Integra/Onkyo RI Components
- Connecting the Power Cord
Turning On the AV receiver
- Turning On and Standby
First Time Setup
- Monitor Setup
- Selecting the Language used for the onscreen setup menus
- Using the Onscreen Setup Menus
- Using the Display to change the settings
- Monitor Out Setup
- Video Input Setup
- Digital Audio Input Setup
- Analog Audio Input Setup
- Speaker Settings
- TV Format Setup (Australian models)
- FM/AM Frequency Step Setup
- Changing the Input Display
- Audyssey MultEQ(R) XT Room Correction and Speaker Setup
Basic Operations
- Selecting the Input Source
- Adjusting the Bass & Treble
- Displaying Source Information
- Setting the Display Brightness
- Muting the AV Receiver
- Using the Sleep Timer
- Selecting Speaker Layout
- Using Headphones
- Using Easy Macros
Listening to the Radio
- Using the Tuner
- Presetting AM/FM Stations
- Listening to Satellite Radio (North American models)
- Using RDS (Australian models)
Universal Port Option UP-A1 Dock for iPod
- About the UP-A1 Dock
- Compatible iPod models
- Function Overview
- Controlling iPod
Recording
Using the Listening Modes
- Selecting Listening Modes
- Listening Modes Available for Each Source Format
- About the Listening Modes
Advanced Setup
- Onscreen Setup Menus
- Input/Output Assign
- Speaker Setup
- Audio Adjust
- Source Setup
- Assigning Listening Modes to Input Sources
- Miscellaneous (Volume/OSD) Setup
- Hardware Setup
- Lock Setup
- Digital Input Signal Formats
- Using the Audio Settings
NET/USB
- About NET
- Connecting the AV Receiver
- Listening to Internet Radio
- Playing Music Files on a Server
- Network Settings
- About USB
- Playing Music Files on a USB Device
Multi Zone
- Multiroom Capability
- Connecting Zone 2
- Connecting Zone 3
- Connecting Zone 4
- Setting the Powered Zone 2/3/4
- Setting the Multi Zone
- Using Zone 2/3/4
- Using the 12V Triggers
- Using the Remote Controller in Zone 2/3/4 and Multiroom Control Kits
Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Code
- Entering Remote Control Codes
- Remote Control Codes for Integra/ Onkyo Components Connected via RI
- Resetting Remote Mode Buttons
- Resetting the Remote Controller
- Controlling a TV
- Controlling a DVD Player or DVD Recorder
- Controlling a VCR or PVR
- Controlling a Satellite Receiver or Cable Receiver
- Controlling a CD Player, CD Recorder or MD Recorder
- Controlling an RI Dock
- Controlling a Cassette Recorder
- Activities Setup
- Learning Commands
- Using Normal Macros
Troubleshooting
Specifications (DTR-70.1)
Specifications (DTR-80.1)
Video Resolution Chart

First Time Setup—Continued

• Make the room as quiet as possible.

Background noise can disrupt the

room measurements. Close

windows, silence cell phones,

televisions, radios, air conditioners,

fluorescent lights, home appliances,

light dimmers, or other devices.

• Cell phones should be turned off or

placed away from all audio

electronics during the measurement

process as Radio Frequency

Interference (RFI) may cause

measurement disruptions (even if the

cell phone is not in use).

Press [Enter].

The room correction and speaker setup

starts.

Test tones are played through each

speaker as Audyssey MultEQ

Room Correction and Speaker Setup

runs. This process takes a few minutes.

Please refrain from talking during

measurements and do not stand

between speakers and the microphone.

The following screen appears.

Place the setup microphone at

the next position (page 58), and

then press [Enter].

Audyssey MultEQ XT performs more

measurements. This takes a few

minutes.

MultEQ XT: Auto Setup

Do not unplug setup microphone.

Please keep quiet.

Now measuring. . .

MultEQ XT: Auto Setup

Please place setup microphone at 2nd position at

ear height.

MultEQ XT: Auto Setup

Do not unplug setup microphone.

Please keep quiet.

Now measuring. . .

When prompted, place the setup

microphone at the next position,

and repeat step 5.

After the 3rd to the 8th measure-

ment, the following screen

appears.

Use the Up and Down [q]/[w] but-

tons to select an option, and then

press [Enter].

Select “Next” to begin measuring

the next measurement position.

After the 8th measurement has been

taken, the procedure automatically

proceeds to step 8.

Finish(Calculate):

Select this if you don’t want to

measure any more listening posi-

tions and are ready to calculate the

results, then go to step 8.

When the measurements are

complete, the following screen

appears.

MultEQ XT: Auto Setup

Finish(Calculate)

Please select [Next], when measuring next position,

and select [Finish], when ending.

MultEQ XT: Auto Setup

Calculating...