Owner's Manual
Table Of Contents
- Important Safety Instructions
- Precautions
- Supplied Accessories
- Features
- Front & Rear Panels
- Remote Controller
- About Home Theater
- Connecting the AV receiver
- Connecting Your Speakers
- Bi-amping the Front Speakers
- Bridging the Front Speakers
- Connecting Passive Subwoofers
- Connecting Antenna
- About AV Connections
- Connecting Components with HDMI
- Connecting Both Audio & Video
- Which Connections Should I Use?
- Connecting a TV or Projector
- Connecting a DVD Player
- Connecting a VCR or DVD Recorder for Playback
- Connecting a VCR or DVD Recorder for Recording
- Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
- Connecting a Game Console
- Connecting a Camcorder or Other Device
- Connecting a CD Player or Turntable
- Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
- Connecting a Power Amplifier
- Connecting an RI Dock
- Connecting a Universal Port Option Series
- Connecting Integra/Onkyo RI Components
- Connecting the Power Cord
- Turning On the AV receiver
- First Time Setup
- Monitor Setup
- Selecting the Language used for the onscreen setup menus
- Using the Onscreen Setup Menus
- Using the Display to change the settings
- Monitor Out Setup
- Video Input Setup
- Digital Audio Input Setup
- Analog Audio Input Setup
- Speaker Settings
- TV Format Setup (Australian models)
- FM/AM Frequency Step Setup
- Changing the Input Display
- Audyssey MultEQ(R) XT Room Correction and Speaker Setup
- Basic Operations
- Listening to the Radio
- Universal Port Option UP-A1 Dock for iPod
- Recording
- Using the Listening Modes
- Advanced Setup
- NET/USB
- Multi Zone
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Code
- Entering Remote Control Codes
- Remote Control Codes for Integra/ Onkyo Components Connected via RI
- Resetting Remote Mode Buttons
- Resetting the Remote Controller
- Controlling a TV
- Controlling a DVD Player or DVD Recorder
- Controlling a VCR or PVR
- Controlling a Satellite Receiver or Cable Receiver
- Controlling a CD Player, CD Recorder or MD Recorder
- Controlling an RI Dock
- Controlling a Cassette Recorder
- Activities Setup
- Learning Commands
- Using Normal Macros
- Troubleshooting
- Specifications (DTR-70.1)
- Specifications (DTR-80.1)
- Video Resolution Chart

85
Universal Port Option UP-A1 Dock for iPod—Continued
By pressing the Remote Mode button that’s been pro-
grammed with the remote control code for your Dock,
you can control your iPod in the Dock with the following
buttons.
The [Port] button is preprogrammed with the remote
control code for controlling a Dock with Universal Port
connector.
For details on entering a remote control code, see
page 150.
When Using a Dock with Universal Port connector:
• Connect the Dock to the UNIVERSAL PORT jack.
• See the Dock’s instruction manual for more informa-
tion.
You can control your iPod when “Port” is selected as the
input source.
Notes:
• With some iPod models and generations, certain but-
tons may not work as expected.
• For detailed operation of the iPod, please refer to the
instruction manual.
a Arrow [q]/[w] and Enter buttons
Used to navigate menus and select items.
b Previous [7] button
Restarts the current song. Press it again to select the
previous song.
c Fast Reverse [5] button
Press and hold to fast reverse.
d Pause [3] button
Pauses playback. Press it again to start playback.
e Repeat button
Used with the repeat function.
f Display button
Select Standard or Extended mode
*1
.
g Muting button (66)
Mutes or unmutes the AV receiver.
h Album +/– button
Selects the next or previous album.
i VOL [q]/[w] button (64)
Adjusts the volume of the AV receiver.
j Playlist [e]/[r] buttons
Selects the previous or next playlist on the iPod.
k Return button
Exits the menu or returns to the previous menu.
l Play [1] button
Starts playback. If the component is off, it will turn
on automatically.
m Next [6] button
Selects the next song.
n Fast Forward [4] button
Press and hold to fast forward.
o Stop [2] button
Stops playback and displays a menu.
p Random button
Used with the shuffle function.
*1
Standard mode
Nothing is displayed on your TV and you navigate and
select your contents by using your iPod’s display.
Only this mode can playback the video.
Extended mode
Playlists (artists, albums, songs, and so on) are displayed
on your TV, and you can navigate and select your music
while looking at your TV.
Notes:
• In Extended mode, the playback will be continued
even if the AV receiver is turned off.
• In Extended mode, you cannot operate your iPod
directly.
• In Extended mode, it may take some time to acquire
the contents.
• In Extended mode, video contents can not display on
your TV.
Controlling iPod
n
m
k
l
p
o
f
h
i
j
d
b
c
a
g
e
Press [Port] button first.