DTR-70.6 Basic Manual Advanced Manual found here http://integraworldwide.com/manual/dtr706/adv/en.
Before Start Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.
Step 1: Connections TV Personal computer HDMI IN HDMI OUT To use the ARC function, connect to the ARC compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI cable HDMI OUT HDMI OUT HDMI OUT Game console 1 HDMI OUT Set-top box/Digital video recorder, etc. Blu-ray Disc/DVD player Satellite/Cable set-top box, etc. For how to make settings, see the Advanced Manual.
Step 1: Connections The unit supports the HDMI Through function that allows transmission from players to the TV even if the unit is in standby. You have to modify the settings to enable the input selection link with CEC compliant device, connection with ARC compatible TV, and HDMI Through function. See "2nd Step : Source Connection" of "Step 2: Setting Up". r To enjoy HDCP2.2 protected video, connect the player to the IN3 jack and the TV to the HDMI OUT MAIN jack of the unit.
Step 1: Connections 2 r Although Height 1 speakers can enhance surround effects, we recommend you to add Height 2 speakers in order to ensure full effects. r Install Height speakers such as Front High and Rear High speakers on the upper part of the front or rear wall. There are other types of Height speakers. Connecting speakers Speaker Layout 9 F " I Wide speakers: Placing IJ speakers makes the front sound field even wider. It also give smoother transitions between front and back surround sounds.
Step 1: Connections Ceiling speakers, etc. are used for maximizing effects in Dolby Atmos or Dolby Surround listening mode. Install Top Front speakers midway between the position just above the listening position and the position just above the front speakers. Install Top Middle speakers just above the listening position. Install Top Rear speakers midway between the position just above the listening position and the position just above the surround back speakers.
Step 1: Connections Connecting the Subwoofer Up to four subwoofers with built-in power amplifier can be connected to the subwoofer jacks. Set the cut-off filter selection switch of the subwoofer to DIRECT. If the subwoofer does not have a cut-off filter selection switch but has a cut-off frequency adjusting dial, turn it to the maximum frequency. If your subwoofer does not have builtin power amplifier, you can connect a power amplifier between the unit and the subwoofer.
Step 2: Setting Up Important: When the unit is turned on for the first time, the setup wizard of the section 2 will automatically be launched. If you use the setup wizard to make the initial setup, connect a TV to the HDMI OUT MAIN or SUB jack of the unit via HDMI connection. 1 Turning the power on Connect the power cord to the outlet. Press zOn/Standby on the main unit or zReceiver on the remote controller to turn the unit on or to standby mode.
Step 2: Setting Up 2. After placing the microphone at the measurement position, select "Do it Now" in the start screen and press Enter. 3. Connect the microphone to the Setup Mic jack of the unit. Setup Mic jack Speaker setup microphone 4. Follow the guidance displayed on the TV screen. AccuEQ Room Calibration Front Speakers Type 6. When the measurement is completed, the measurement result is displayed. Press W/X on the remote controller to check the settings. Press Enter with "Save" selected.
Step 2: Setting Up 3rd Step : Remote Mode Setup Initial Setup Remote Mode Setup Preprograming remote will give you control of other devices from AV receiver remote Would you like to setup your remote to control your devices? This may take a while depending on what and how many you have connected. You can always come back to remote setup from setup “8-2 Remote Mode Setup”. Yes No, Skip HOME Exit In this step, you can enable operation of the other components using the remote controller of the unit.
Step 3: Playing Back 1 Playing the player and TV 1 7 8 Remote Controller Parts Name 1 zReceiver button: Turns the unit on or into standby mode. 2 Remote Mode/Input Selector button: Switches the input to be played. 2 9 3 Cursor buttons and Enter button: Moves the cursor and confirms the selection. 4 Q Setup button: Displays the Quick Setup menu that F z To control the unit: The remote controller of this unit has the remote mode function for controlling other devices.
Step 3: Playing Back Listening Modes You can select a listening mode from various options such as Dolby Digital, Dolby Atmos and DTS. Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. Movie/TV: You can select a listening mode suitable for movies and TV programs. Music: You can select a listening mode suitable for music. Game: You can select a listening mode suitable for games.
Step 3: Playing Back 3 Using the Home menu In the Home menu, you can make advanced setup and use Internet radio and DLNA function. For details on the operation, see the Advanced Manual. 1. After pressing Receiver, press Home on the remote controller. The Home menu is displayed on the TV screen. You can also use the Home button on the main unit. HOME Setup 2. Select the item with the cursors of the remote controller and press Enter to confirm your selection.
Step 3: Playing Back r "Subwoofer 2 Level" cannot be adjusted if "Subwoofer" has been set to "1ch" in "Speaker Configuration". AccuEQ Room Calibration: Disables the sound field set in the automatic speaker setting. The setting can be separately set to each input. r This setting cannot be selected if the automatic speaker setting has not been performed. r It cannot be set if headphones are connected or the listening mode is Direct. Late Night: Make small sounds to be easily heard.
Step 3: Playing Back 5 Using the multi-zone function The function allows you to connect the unit with a TV or audio equipment placed in a separate room so that you can enjoy audio and video of the connected equipment even if you are staying in a different room. It is possible to perform playback in the main room and a separate room at the same time, for example by playing the Blu-ray Disc player in the main room where the unit is placed while playing Internet radio in a separate room.
Step 3: Playing Back To turn off the multi-zone function: Press Zone on the remote controller repeatedly to select Zone 2 or Zone 3 and press zReceiver. To control on the main unit, press Zone2 or Zone3 and within 8 seconds, press Off. Listening to Music in a Separate Room c. Connecting an Integrated Amplifier in a Separate Room It is possible to play 2 ch source in a separate room while 11.2 ch source is being played in the main room.
1 M N 2 O 3 4 5 6 7 P 8 Q 9 F G H I (Australian and Asian models) J K R L S Front Panel 1 zOn/Standby button: Turns the unit on or into standby 2 3 4 5 6 mode. Hybrid Standby indicator: Stays lit if the unit enters standby when the HDMI Through and network standby are enabled. Dolby Atmos indicator: Stays lit when the Dolby Atmos listening mode is selected with Height speakers or surround back speakers enabled.
R USB port: A USB storage device is connected so that 1 music files stored in it can be played. S AUX Input HDMI/MHL jacks: An HD video camera or MHL-enabled mobile device is connected. It is possible to send video and audio of an MHL-enabled mobile device. AUX Input Video/Audio, Digital jacks: A video camera or such other device is connected. 8 2 3 4 5 9 6 F 7 G Display 1 Speaker/Channel display: Displays the output channel 2 3 4 5 6 7 18 that corresponds to the selected listening mode.
1 2 J 3 4 5 K L 6 M 7 8 9 F N G H I O P Rear Panel 1 DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio 2 3 4 5 6 7 signals are input. RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit. ETHERNET port: Used for LAN connection HDMI IN/OUT jacks: Digital video signals and audio signals are transmitted between the unit and the connected devices.
Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Specifications Amplifier Section Network Section r #WFKQ +PRWVU Rated Output Power All channels: 135 watts minimum continuous power per channel, |QJO NQCFU EJCPPGNU|FTKXGP HTQO *\ VQ M*\ YKVJ C maximum total harmonic distortion of 0.
License and Trademark Information Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS-HD Master Audio and DTS Neo:X | 11.1 are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
DISCLAIMER Through this device you are able to link to other services or websites which are not under the control of any company which has designed, manufactured or distributed/have distributed this device, and its affiliates (collectively, “Company”). We have no control over the nature, content and availability of those services. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.
Integra Division of Integra Division of Integra Division of 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com 1301, 555 Tower, No.555 West NanJin Road, Jin an, Shanghai, China 200041, Tel: 86-21-52131366 Fax: 86-21-52130396 http://www.integra.com.cn Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 http://www.integraworldwide.
