Owner's Manual

12
Front & Rear Panels—Continued
j MONITOR OUT
These S-Video and composite video jacks should be
connected to a video input on your TV or projector.
k COMPONENT VIDEO IN 1, 2 and 3
These RCA component video inputs are for con-
necting components with a component video out-
put, such as a DVD player, DVD recorder, or DVR
(digital video recorder). They’re assignable, which
means you can assign each one to an input selector
to suit your setup. See “Component Video Input
Setup” on page 52.
l COMPONENT VIDEO MONITOR OUT
These RCA component video outputs are for con-
necting a TV or projector with a component video
input.
m COMPONENT VIDEO ZONE 2 OUT
This RCA component video output is for connect-
ing a TV or projector with a component video input
located in your main listening room or Zone 2.
n ZONE 2 OUT
This composite video output can be connected to a
video input on a TV in Zone 2.
o PC INPUT ANALOG RGB (DTR-80.1)
This input terminal is for connecting a personal
computer with an analog RGB output. You can
assign it to an input selector to suit your setup. See
“Component Video Input Setup” on page 52.
p FM ANTENNA
This jack is for connecting an FM antenna.
AM ANTENNA
These push terminals are for connecting an AM
antenna.
q AC INLET
The supplied power cord is connected here. The
other end of the power cord should be connected to
a suitable wall outlet.
r GND screw
This screw is for connecting a turntable’s ground
wire.
s PHONO IN
These analog audio inputs are for connecting a turn-
table.
t CD IN
These analog audio inputs are for connecting a CD
player’s analog audio output.
u 12V TRIGGER OUT (A/B/C)
These outputs can be connected to the 12-volt trig-
ger inputs on other components.
v TV/TAPE IN/OUT
These analog audio inputs and outputs are for con-
necting a TV or recorder with an analog audio input
and output (cassette, Mini Disc, etc.).
w AUX 2 IN
This analog audio input is for connecting an analog
audio output, such as an audio device, etc.
x GAME IN
Here you can connect a game console, etc. Input
jacks include S-Video, composite video, and analog
audio.
y CBL/SAT IN
Here you can connect a cable/satellite receiver, set-
top box, etc. Input jacks include S-Video, composite
video, and analog audio.
z VCR/DVR IN/OUT
Here you can connect a VCR or DVR (digital video
recorder). Input and output jacks include S-Video,
composite video, and analog audio.
A DVD/BD IN
Here you can connect a DVD/BD player. Input
jacks include S-Video, composite video, and analog
audio. You can connect a DVD/BD player’s 2-chan-
nel analog audio output.
B MULTI CH input: FRONT L/R, CENTER,
SUBWOOFER, SURR L/R, and SURR BACK
L/R
This analog multichannel input is for connecting a
component with a 5.1/7.1-channel analog audio out-
put, such as a DVD player, DVD-Audio or Super
Audio CD-capable player, or an MPEG decoder.
C PRE OUT: FRONT L/R, CENTER, SURR L/R,
SURR BACK L/R, and FRONT HIGH/WIDE
L/R
These multichannel analog audio outputs can be
connected to the analog audio input on a multichan-
nel power amplifier for when you want to use the
AV receiver solely as a preamplifier.
PRE OUT: SW1, SW2
These analog audio outputs can be connected to a
powered subwoofer. You can connect the powered
subwoofer with each jacks respectively. Level and
distance can be set individually for each output.
D PRE OUT: ZONE 2, ZONE 3
These analog audio outputs can be connected to the
line inputs on amplifiers in Zone 2 and Zone 3. The
SW jacks can be connected to the inputs on pow-
ered subwoofers in Zone 2 and Zone 3.