Owner's Manual
Table Of Contents
- Important Safety Instructions
- Precautions
- Supplied Accessories
- Features
- Front & Rear Panels
- Remote Controller
- About Home Theater
- Connecting the AV receiver
- Connecting Your Speakers
- Bi-amping the Front Speakers
- Bridging the Front Speakers
- Connecting Passive Subwoofers
- Connecting Antenna
- About AV Connections
- Connecting Components with HDMI
- Connecting Both Audio & Video
- Which Connections Should I Use?
- Connecting a TV or Projector
- Connecting a DVD Player
- Connecting a VCR or DVD Recorder for Playback
- Connecting a VCR or DVD Recorder for Recording
- Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
- Connecting a Game Console
- Connecting a Camcorder or Other Device
- Connecting a CD Player or Turntable
- Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
- Connecting a Power Amplifier
- Connecting an RI Dock
- Connecting a Universal Port Option Series
- Connecting Integra/Onkyo RI Components
- Connecting the Power Cord
- Turning On the AV receiver
- First Time Setup
- Monitor Setup
- Selecting the Language used for the onscreen setup menus
- Using the Onscreen Setup Menus
- Using the Display to change the settings
- Monitor Out Setup
- Video Input Setup
- Digital Audio Input Setup
- Analog Audio Input Setup
- Speaker Settings
- TV Format Setup (Australian models)
- FM/AM Frequency Step Setup
- Changing the Input Display
- Audyssey MultEQ(R) XT Room Correction and Speaker Setup
- Basic Operations
- Listening to the Radio
- Universal Port Option UP-A1 Dock for iPod
- Recording
- Using the Listening Modes
- Advanced Setup
- NET/USB
- Multi Zone
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Code
- Entering Remote Control Codes
- Remote Control Codes for Integra/ Onkyo Components Connected via RI
- Resetting Remote Mode Buttons
- Resetting the Remote Controller
- Controlling a TV
- Controlling a DVD Player or DVD Recorder
- Controlling a VCR or PVR
- Controlling a Satellite Receiver or Cable Receiver
- Controlling a CD Player, CD Recorder or MD Recorder
- Controlling an RI Dock
- Controlling a Cassette Recorder
- Activities Setup
- Learning Commands
- Using Normal Macros
- Troubleshooting
- Specifications (DTR-70.1)
- Specifications (DTR-80.1)
- Video Resolution Chart
157
Controlling Other Components—Continued
By pressing the Remote Mode button that’s been pro-
grammed with the remote control code for your Dock,
you can control your iPod in the Dock with the following
buttons.
For some RI docks, the [On], [Standby] button may not
work with a remote control code 82990 (without u).
In this case, make an u connection and enter a remote
control code 81993 (with u).
For details on entering a remote control code, see
page 150.
When Using an RI Dock:
• When using the Onkyo DS-A3 RI Dock, make an u
connection and enter a remote control code 81993
(with u).
• Connect the RI Dock to the TV/TAPE IN, VCR/DVR
IN, or GAME IN L/R jacks.
• Set the RI Dock’s RI MODE switch to HDD or HDD/
DOCK.
• Set the AV receiver’s Input Display to DOCK (see
page 57).
• See to the Dock’s instruction manual for more infor-
mation.
a On, Standby buttons
Turns the iPod on or off.
Notes:
• This button does not turn the Onkyo DS-A2 or
DS-A2X RI Dock on or off.
• Your iPod may not respond the first time you press this
button, in which case you should press it again. This is
because the remote controller transmits the On and
Standby commands alternately, so if your iPod is
already on, it will remain on when the remote control-
ler transmits an On command. Similarly, if your iPod
is already off, it will remain off when the remote con-
troller transmits an Off command.
b Top Menu button
Works as a Mode button when used with a DS-A2
RI Dock.
c Arrow [q]/[w] and Enter buttons
Used to navigate menus and select items.
d Previous [7] button
Restarts the current song. Press it twice to select the
previous song.
e Fast Reverse [5] button
Press and hold to fast reverse.
f Pause [3] button
Pauses playback.
g Repeat button
Used with the repeat function.
h Display button
Turns on the backlight for 30 seconds.
i Muting button (66)
Mutes or unmutes the AV receiver.
j Album +/– button
Selects the next or previous album.
k VOL [q]/[w] button (64)
Adjusts the volume of the AV receiver.
l Menu button
Exits the menu.
m Playlist [e]/[r] button
Selects the previous or next playlist on the iPod.
n Play [1] button
Starts playback. If the component is off, it will turn
on automatically.
o Next [6] button
Selects the next song.
p Fast Forward [4] button
Press and hold to fast forward.
q Stop [2] button
Stops playback and displays a menu.
Controlling an RI Dock
h
k
j
n
l
o
p
q
r
m
b
c
a
i
d
f
e
g
s
Press the appropriate Remote
Mode button first.