Owner's Manual

ManualsBrandsIntegra ManualsReceiversIntegra DTR-80.1

Table Of Contents

Important Safety Instructions
Precautions
Supplied Accessories
Features
Front & Rear Panels
- Front Panel
- Display
- Rear Panel
Remote Controller
- Installing the Batteries
- Aiming the Remote Controller
- Controlling the AV Receiver
About Home Theater
- Enjoying Home Theater
Connecting the AV receiver
- Connecting Your Speakers
- Bi-amping the Front Speakers
- Bridging the Front Speakers
- Connecting Passive Subwoofers
- Connecting Antenna
- About AV Connections
- Connecting Components with HDMI
- Connecting Both Audio & Video
- Which Connections Should I Use?
- Connecting a TV or Projector
- Connecting a DVD Player
- Connecting a VCR or DVD Recorder for Playback
- Connecting a VCR or DVD Recorder for Recording
- Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
- Connecting a Game Console
- Connecting a Camcorder or Other Device
- Connecting a CD Player or Turntable
- Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
- Connecting a Power Amplifier
- Connecting an RI Dock
- Connecting a Universal Port Option Series
- Connecting Integra/Onkyo RI Components
- Connecting the Power Cord
Turning On the AV receiver
- Turning On and Standby
First Time Setup
- Monitor Setup
- Selecting the Language used for the onscreen setup menus
- Using the Onscreen Setup Menus
- Using the Display to change the settings
- Monitor Out Setup
- Video Input Setup
- Digital Audio Input Setup
- Analog Audio Input Setup
- Speaker Settings
- TV Format Setup (Australian models)
- FM/AM Frequency Step Setup
- Changing the Input Display
- Audyssey MultEQ(R) XT Room Correction and Speaker Setup
Basic Operations
- Selecting the Input Source
- Adjusting the Bass & Treble
- Displaying Source Information
- Setting the Display Brightness
- Muting the AV Receiver
- Using the Sleep Timer
- Selecting Speaker Layout
- Using Headphones
- Using Easy Macros
Listening to the Radio
- Using the Tuner
- Presetting AM/FM Stations
- Listening to Satellite Radio (North American models)
- Using RDS (Australian models)
Universal Port Option UP-A1 Dock for iPod
- About the UP-A1 Dock
- Compatible iPod models
- Function Overview
- Controlling iPod
Recording
Using the Listening Modes
- Selecting Listening Modes
- Listening Modes Available for Each Source Format
- About the Listening Modes
Advanced Setup
- Onscreen Setup Menus
- Input/Output Assign
- Speaker Setup
- Audio Adjust
- Source Setup
- Assigning Listening Modes to Input Sources
- Miscellaneous (Volume/OSD) Setup
- Hardware Setup
- Lock Setup
- Digital Input Signal Formats
- Using the Audio Settings
NET/USB
- About NET
- Connecting the AV Receiver
- Listening to Internet Radio
- Playing Music Files on a Server
- Network Settings
- About USB
- Playing Music Files on a USB Device
Multi Zone
- Multiroom Capability
- Connecting Zone 2
- Connecting Zone 3
- Connecting Zone 4
- Setting the Powered Zone 2/3/4
- Setting the Multi Zone
- Using Zone 2/3/4
- Using the 12V Triggers
- Using the Remote Controller in Zone 2/3/4 and Multiroom Control Kits
Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Code
- Entering Remote Control Codes
- Remote Control Codes for Integra/ Onkyo Components Connected via RI
- Resetting Remote Mode Buttons
- Resetting the Remote Controller
- Controlling a TV
- Controlling a DVD Player or DVD Recorder
- Controlling a VCR or PVR
- Controlling a Satellite Receiver or Cable Receiver
- Controlling a CD Player, CD Recorder or MD Recorder
- Controlling an RI Dock
- Controlling a Cassette Recorder
- Activities Setup
- Learning Commands
- Using Normal Macros
Troubleshooting
Specifications (DTR-70.1)
Specifications (DTR-80.1)
Video Resolution Chart

Connecting the AV receiver—Continued

The FRONT L/R and SURR BACK/ZONE 3 L/R termi-

nal posts can be used with front speakers and surround

back speakers respectively, or bi-amped to provide sepa-

rate tweeter and woofer feeds for a pair of front speakers

that support bi-amping, providing improved bass and

treble performance.

• When bi-amping is used, surround back speakers can-

not be used.

• For bi-amping, the FRONT L/R terminal posts con-

nect to the front speakers’ woofer terminals. And the

SURR BACK/ZONE 3 L/R terminal posts connect to

the front speakers’ tweeter terminals.

• Once you’ve completed the bi-amping connections

shown below and turned on the AV receiver, you must

set the “Speakers Type(Front)” setting to “Bi-Amp” to

enable biamping (see page 54).

Important:

• When making the bi-amping connections, be sure

to remove the jumper bars that link the Speakers’

tweeter (high) and woofer (low) terminals.

• Bi-amping can only be used with speakers that support

bi-amping. Refer to your speaker manual.

Bi-amping Speaker Hookup

Bi-amping the Front Speakers

Connect the AV receiver’s FRONT R positive (+)

terminal to the right speaker’s positive (+) Woofer

(low) terminal. And connect the AV receiver’s

FRONT R negative (–) terminal to the right

speaker’s negative (–) Woofer (low) terminal.

Connect the AV receiver’s SURR BACK/ZONE 3

R positive (+) terminal to the right speaker’s pos-

itive (+) Tweeter (high) terminal. And connect the

AV receiver’s SURR BACK/ZONE 3 R negative

(–) terminal to the right speaker’s negative (–)

Tweeter (high) terminal.

Connect the AV receiver’s FRONT L positive (+)

terminal to the left speaker’s positive (+) Woofer

(low) terminal. And connect the AV receiver’s

FRONT L negative (–) terminal to the left

speaker’s negative (–) Woofer (low) terminal.

Connect the AV receiver’s SURR BACK/ZONE 3

L positive (+) terminal to the left speaker’s posi-

tive (+) Tweeter (high) terminal. And connect the

AV receiver’s SURR BACK/ZONE 3 L negative

(–) terminal to the left speaker’s negative (–)

Tweeter (high) terminal.

Woofer (low)

Tweeter (high)

Woofer (low)

Left speaker

Right speaker