Owner's Manual
Table Of Contents
- Important Safety Instructions
- Precautions
- Supplied Accessories
- Features
- Front & Rear Panels
- Remote Controller
- About Home Theater
- Connecting the AV receiver
- Connecting Your Speakers
- Bi-amping the Front Speakers
- Bridging the Front Speakers
- Connecting Passive Subwoofers
- Connecting Antenna
- About AV Connections
- Connecting Components with HDMI
- Connecting Both Audio & Video
- Which Connections Should I Use?
- Connecting a TV or Projector
- Connecting a DVD Player
- Connecting a VCR or DVD Recorder for Playback
- Connecting a VCR or DVD Recorder for Recording
- Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
- Connecting a Game Console
- Connecting a Camcorder or Other Device
- Connecting a CD Player or Turntable
- Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
- Connecting a Power Amplifier
- Connecting an RI Dock
- Connecting a Universal Port Option Series
- Connecting Integra/Onkyo RI Components
- Connecting the Power Cord
- Turning On the AV receiver
- First Time Setup
- Monitor Setup
- Selecting the Language used for the onscreen setup menus
- Using the Onscreen Setup Menus
- Using the Display to change the settings
- Monitor Out Setup
- Video Input Setup
- Digital Audio Input Setup
- Analog Audio Input Setup
- Speaker Settings
- TV Format Setup (Australian models)
- FM/AM Frequency Step Setup
- Changing the Input Display
- Audyssey MultEQ(R) XT Room Correction and Speaker Setup
- Basic Operations
- Listening to the Radio
- Universal Port Option UP-A1 Dock for iPod
- Recording
- Using the Listening Modes
- Advanced Setup
- NET/USB
- Multi Zone
- Controlling Other Components
- Preprogrammed Remote Control Codes
- Looking up for Remote Control Code
- Entering Remote Control Codes
- Remote Control Codes for Integra/ Onkyo Components Connected via RI
- Resetting Remote Mode Buttons
- Resetting the Remote Controller
- Controlling a TV
- Controlling a DVD Player or DVD Recorder
- Controlling a VCR or PVR
- Controlling a Satellite Receiver or Cable Receiver
- Controlling a CD Player, CD Recorder or MD Recorder
- Controlling an RI Dock
- Controlling a Cassette Recorder
- Activities Setup
- Learning Commands
- Using Normal Macros
- Troubleshooting
- Specifications (DTR-70.1)
- Specifications (DTR-80.1)
- Video Resolution Chart
49
First Time Setup—Continued
If you connect your TV to the HDMI output, set the
“Monitor Out” setting so that the onscreen setup menus
are displayed and composite video, S-Video, and
component video sources are upconverted and output.
If you connect your TV to the COMPONENT VIDEO
MONITOR OUT, set the “Monitor Out” setting so that
the onscreen setup menus are displayed and composite
video and S-Video sources are upconverted and output.
You can specify the output resolution for the HDMI
outputs and COMPONENT VIDEO MONITOR OUT
and have the AV receiver upconvert the picture
resolution as necessary to match the resolution
supported by your TV.
Monitor Out Setup
1
Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.
If the main menu doesn’t appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select “1. Input/Output
Assign”, and then press [Enter].
The “Input/Output Assign” menu
appears.
3
Use the Up and Down [q]/[w] but-
tons to select “1. Monitor Out”,
and then press [Enter].
The “Monitor Out” menu appears.
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
6. Gamma Curve
Monitor Out
Resolution
Brightness
Contrast
Hue
Saturation
HDMI Main
Through
0
0
0
0
1–1. Monitor Out
4
Use the Up and Down [q]/[w] but-
tons to select “Monitor Out”, and
use the Left and Right [e]/[r]
buttons to select:
Analog:
Select this if your TV is connected
to the COMPONENT VIDEO
MONITOR OUT, S MONITOR
OUT, or V MONITOR OUT.
HDMI Main:
Select this if your TV is connected
to the HDMI OUT MAIN.
HDMI Sub:
Select this if your TV is connected
to the HDMI OUT SUB.
Both:
Select this if your TVs are con-
nected to the HDMI OUT MAIN
and HDMI OUT SUB. Video sig-
nals are output from both HDMI
outputs at the resolution supported
by both TVs.
Both (Main):
Select this if your TVs are con-
nected to the HDMI OUT MAIN
and HDMI OUT SUB. Video sig-
nals are output from both HDMI
outputs but HDMI OUT MAIN will
become a priority; depending on the
resolution, video signals may not be
output from HDMI OUT SUB.
Both (Sub):
Select this if your TVs are con-
nected to the HDMI OUT MAIN
and HDMI OUT SUB. Video sig-
nals are output from both HDMI
outputs but HDMI OUT SUB will
become a priority; depending on the
resolution, video signals may not be
output from HDMI OUT MAIN.
Notes:
• If not connected to the same output
you have selected in the“Monitor
Out” setting, the “Monitor Out”
setting will be automatically
switched to “Analog”.
• When you select other than
“Analog”, the onscreen setup menus
are output by only the HDMI
outputs. If you’re not using the
HDMI output and select settings
by mistake and the menus
disappear, press the [Monitor Out]
button to select “Analog”.
• For Deep Color output, if the
“Monitor Out” setting is set to “Both
(Main)” or “Both (Sub)”, the number
of bit may be limited due to the
capability of your TV connected to a
priority output.