DBS-30.2 E5SF1UD_DBS30.2_EN_v1.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear or bottom of the cabinet.
PRECAUTIONS Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death. 1. Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder. 2. AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact the dealer from whom you purchased this unit. 3.
PRECAUTIONS • Do not use this unit when there’s the possibility of moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit. If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any condensation will have evaporated. 12.
PRECAUTIONS IR signal g check Supplied Accessories Remote Control with AA (1.5 V) battery x 2 RCA audio / video cables AC cord Instruction Manual Netflix Box-insert Instruction Manual Netflix Box-insert Note about Recycling • This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
PRECAUTIONS “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. Trademark Information HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. “BONUSVIEW” is trademark of Blu-ray Disc Association. "BD-Live" and "BD-Live" logo are trademarks of Blu-ray Disc Association. Manufactured under license from Dolby Laboratories.
CONTENTS Introduction PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . .9 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES Features Full high-definition video playback Watch movies in the highest picture quality available for your HDTV. This unit offers full high-definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness delivers a more true-to-life picture. DVD upscaling for enhanced picture quality Your current DVD will look even better than before thanks to video upconversion.
FEATURES Symbols Used in this Manual To specify for which media type each function is, we put the following symbols at the beginning of each item to operate. Symbol BD-V Description Description refers to BD-video and BD-RE (ver. 2.1) / BD-R (ver. 1.1 / 1.2 / 1.
FUNCTIONAL OVERVIEW Front Panel 1 * 2 3 4 5 6* 7 8 9 10* 11 The unit can also be turned on by pressing these buttons. 1. I / y On / Standby button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord) 2. Standby indicator • This indicator lights up in red when the unit is in standby mode and turns off when the unit is active. 3.
FUNCTIONAL OVERVIEW Remote Control 1 14 2 15* 16 3 17 4 18 19 20 5 11* 6 21 7 22 8 23 9 24 10 25 12 27 13 28 26 * The unit can also be turned on by pressing these buttons. 1. Display button • Press to display the on-screen display menu. 2. On / Standby I / y button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord) 3. Number buttons • Press to enter the title, chapter, track or file number.
FUNCTIONAL OVERVIEW Installing the Batteries in the Remote Control Install 2 AA (1.5 V) batteries matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
FUNCTIONAL OVERVIEW Front Panel Display 1 2 • Brightness of the display can be adjusted. Refer to “Panel Display” in “FUNCTION SETUP” on page 50. 1. Displays playback status icon. Refer to the table below. 2. Displays various kinds of information such as title number, elapsed time, repeat mode, etc.
CONNECTIONS Connection to the TV • Make one of the following connections, depending on the capabilities of your existing device.
CONNECTIONS HDMI Output Mode and Actual Output Signals Press [Resolution] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [Resolution] is pressed.
CONNECTIONS ■ Audio signals output from HDMI OUT jack “HDMI Audio Out” setting “BD Audio Mode” setting Media Audio Source “HDMI Multi (Normal)” “HD Audio Output” “Mix Audio Output” “HDMI Multi (LPCM)” “HD Audio Output” “Mix Audio Output” Audio CD DTS-CD AVCHD MP3 WMA DLNA Video DLNA Music Netflix CinemaNow Blockbuster *1 *2 *3 *4 *5 *6 “HD Audio Output” “Mix Audio Output” Which audio format can be output depends on the compatibility of the connected device.
CONNECTIONS Connection to an Audio System • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information.
CONNECTIONS ■ Audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks For the settings in the “Digital Out” to take effect, “HDMI Audio Out” should be set to “Audio Mute”. Otherwise, the settings made in the “HDMI Audio Out” will have a priority, and the same signal as being output from the HDMI OUT jack will be output from the AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks as well.
CONNECTIONS Connecting the AC Cord After you made all necessary connections, connect the AC cord to the AC INLET. Then connect the AC cord to the AC outlet. Insert the plugs securely. Incomplete connections will result in the generation of noise.
CONNECTIONS Note • After connecting to the Internet, set up necessary network settings. • Do not insert any cable other than a LAN cable to the ETHERNET terminal to avoid damaging the unit. • If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router. • If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, use a hub.
INFORMATION ON PLAYBACK Before you start playing back a disc, read the following information. Playable Discs and Files This unit is compatible to play back the following discs / files. To play back a disc / file, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos. Other disc types are not guaranteed to play back. Playable discs Logos Blu-ray Disc - BD-video (single / dual layer) - BD-RE* (ver. 2.
INFORMATION ON PLAYBACK Unplayable Discs and Files The following discs will not be played back in this unit. • • • • • • • • • • • • • CD-ROM • CD-I (compact disc-interactive) DVD-RAM • VSD (video single disc) DVD-audio • video CD HD DVD • SVCD unfinalized disc BD / DVD / CD / SD Memory Card contains DivX® files. BD / DVD hybrid disc (played back as a BD-video only) BD that contains AVCHD files DVD-RW/-R recorded in VR mode or non compatible recording format.
INFORMATION ON PLAYBACK ■ Disc information ■ Chapter information
1 2 1 1 / 10 3 4 T 5 B CHAPTER 2 6 3/5 0 : 01 : 02 1 2 1 / 14 0 : 00: 51 T B 1 Current track number / Total number of tracks 2 Elapsed time (or remaining time) of the current disc B 1 Current title number 2 Current chapter number / Total number of ■ File name information 1 chapters File_name_001 3 Current repeat setting (Only when repeat settiBASIC PLAYBACK Playing Back a BD, DVD or a Disc with AVCHD Files BD-V DVD-V AVCHD 1 2 3 4 Press [On / Standby I / y]. Turn on the TV and select the appropriate input on the TV to which the unit is connected. Press [Open / Close A ] to open the disc tray. Place the disc on the disc tray with its label side facing up. Align the disc to the disc tray guide. Press [Open / Close A ] to close the disc tray. It may take a while to load the disc. 6 Playback may start automatically. If not, press [Play B].
BASIC PLAYBACK Operations Using Title Menu, Disc Menu, and Pop-up Menu BD-V DVD-V AVCHD Many of BD-video and DVD-video disc contains title menu (BD-video / DVD-video / AVCHD), disc menu (DVD-video) or pop-up menu (BD-video) which guides you through the available functions in the disc. The contents of the menus may differ depending on the discs. Playing Back an Audio CD or a Disc with MP3 / WMA / JPEG Files Before you begin, make sure the correct media mode is selected. Set “Mode Select” to “Disc”.
BASIC PLAYBACK Media icon and file name: : Folder : audio CD track : MP3 file : WMA file : JPEG file It is recommended that files to be played back in this unit are recorded under the following specifications: MP3 / WMA • Sampling frequency: 32 kHz, 44.
BASIC PLAYBACK 4 Use [K / L] to select “SD Card”, then press [Enter]. Quick Mode Select Disc SD Card Network Press [Setup] to exit. Even if you turn the unit to the standby mode in “SD Card” mode, it will be in “Disc” mode the next time you turn it on. Reading an SD Memory Card 1 - SD Memory Card (8MB - 2GB) - SDHC Memory Card (4GB - 8GB) - miniSD Card (8MB - 2GB) - microSD Card (8MB - 2GB) • For miniSD Card and microSD Card, the adapter will be required.
BASIC PLAYBACK • To control the playback, use following buttons. Playing Video/Music/Photo Files from DLNA Certified Home Media Servers Button On this unit, you can play video, music and photo files stored on DLNA certified home media servers (version 1.5) connected to your home network. In order to use this feature, you must connect this unit to the Internet. This unit can be used only as DMP(Digital Media Player). 1 2 Connect this unit to the Internet.
BASIC PLAYBACK DLNA Client (DMP) Our Planning Specification Items DLNA version Description 1.5 System Stream Video file Video Codec type MPEG1-Video MPEG MPEG2-PS MPEG2 MP@ML(SD) LPCM/Dolby - AC3/MPEG MPEG2-TS/TTS MPEG2 MP@HL(HD) MPEG2 MP@ML(SD) Dolby - AC3 Audio Codec type Audio file Image file Audio Codec type MPEG1 Sampling Frequency Bit rate LPCM 44.1k, 48kHz − MP3 (MPEG1 Layer3) 32k, 44.1k, 48kHz 32k - 320k bps MP3 (MPEG2 Layer3) 16k, 22.05k, 24kHz 8k - 160k bps MP3 (MPEG2.
SPECIAL PLAYBACK Fast Forward / Fast Reverse BD-V DVD-V CD AVCHD MP3 Step by Step Playback BD-V 1 1 During playback, press [Fwd D] repeatedly for fast forward. During playback, press [Rev E] repeatedly for fast reverse. Every time you press [Fwd D] or [Rev E], the playback speed will change. 2 Press [Play B] to return to normal playback. Note • For BD, DVD and AVCHD, speed changes in 5 different levels.
SPECIAL PLAYBACK A-B Repeat BD-V DVD-V CD Program Playback AVCHD You can play back the specific part (between point A and point B) repeatedly. 1 2 During playback, press [A-B] at the desired starting point A. During playback, press [A-B] at the desired ending point B. As soon as you set the point B, the part between point A and point B will start playback repeatedly. • To cancel the A-B repeat, press [A-B] again. Note • Point B should be set within the same title or track as point A.
SPECIAL PLAYBACK 3 Press [Play B ] to start program playback. Random Playback • Program playback will start. CD To exit from the program playback mode: • Press [Return] in stop mode. This function shuffles the playback order of tracks / files. 1 In stop mode, press [Mode] twice. • The random screen will appear.
SPECIAL PLAYBACK Rapid Playback BD-V DVD-V Enjoying BD-Live Discs with Internet AVCHD BD-V This function plays back approximately at 1.3 times the normal playback while keeping the sound output. This function is available only on discs recorded in the Dolby Digital format. 1 During playback, press [Mode] repeatedly until the Rapid playback setting appears. Off 2 Press [Enter] or [s / B] to switch or off. How to Activate the BD-Live Function (x1.3), “Off”: Plays back in normal speed.
SEARCH Using [Skip H / G ] 1 Using [the Number buttons] (Direct Search) During playback, press [Skip G] to move to the next track. Press it repeatedly to skip to subsequent tracks. Press [Skip H ] once to go back to the beginning of the current track. Press it repeatedly to go to the previous tracks. • For JPEG files, press [Skip H] once to go back to the previous file. Note • For BD and DVD, if title contains no chapters, [Skip H / G ] changes the title. • For JPEG files, [s / B] is also available.
SPECIAL SETTINGS You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack Some video materials may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback. BD-V 1 2 During playback, press [Subtitle].
SPECIAL SETTINGS Setting the BD Audio Mode BD-V There are 2 ways to set “BD Audio Mode” setting; whether to output the secondary and interactive audio accompanied by the primary audio or only the primary audio. Depending on the setting of the mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD output changes between multi LPCM and Bitstream. 1 2 In stop mode with BD inserted, press [Mode]. Use [K / L] to select your desired setting.
NETFLIX OPERATIONS With this unit, you can watch movies and TV episodes streamed instantly from Netflix (version 1.6) via the Internet. In order to use this feature, you must visit the following website on your PC and become a Netflix member. g netflix.com/Integra Before Activating the Connection to Netflix After creating a Netflix account at netflix.com/Integra g , follow the following procedure before activating the connection to Netflix. 1 Connect this unit to the Internet.
CINEMANOW / BLOCKBUSTER OPERATIONS With this unit, you can watch movies and TV episodes streamed instantly from CinemaNow / Blockbuster via the Internet. In order to use this feature, you must visit the following website and create a CinemaNow / Blockbuster account. - For CinemaNow, visit www.cinemanow.com/Login g - For Blockbuster, visit www.blockbuster.
CINEMANOW / BLOCKBUSTER OPERATIONS Renting or Purchasing Movies / TV Episodes After you set up the connection to CinemaNow / Blockbuster, you can rent or purchase movies / TV episodes and watch directly on your TV. 1 Press [B] or [C] while opening screen is displayed. Watching Rented or Purchased Movies / TV Episodes 1 2 • List of rented or purchased movies / TV episodes will appear. • For opening screen, refer to page 12.
FUNCTION SETUP Using the Setup Menu In the setup menu you can change the setting for audio, video, language, etc. You cannot change the setting during playback. Setting items displayed in gray indicates they are not available under the conditions at the time. Quick “Quick” menu contains setting items extracted from “Custom” menu which may be used frequently. 1 In stop mode, press [Setup]. 2 Use [K / L] to select [Enter]. 3 Use [K / L] to select your desired setting items.
FUNCTION SETUP Custom “Custom” menu contains all the setting items. 1 2 3 In stop mode, press [Setup]. Use [K / L] to select [Enter]. , then press Use [K / L] to select your desired setting category, then press [Enter]. : Language : Video : Audio : Parental : Others • For “Parental” menu, follow the procedure on page 49. 4 Use [K / L] to select your desired setting items. 5 Follow the procedure below depending on the setting items.
FUNCTION SETUP ■ Language Language Audio Original Subtitle Off Disc Menu English Player Menu English • For how to select the setting items and options, refer to “Custom” on page 41. Setting items Audio Sets the language for audio. Subtitle Sets the language for subtitle. Disc Menu Sets the language for disc menu or pop-up menu. Player Menu Sets the language for OSD (on-screen display).
FUNCTION SETUP ■ Video Video TV Aspect 16:9 Wide HDMI Video Resolution Auto HDMI Deep Color Auto Component Output 480i Progressive Mode Auto Still Mode Auto • For how to select the setting items and options, refer to “Custom” on page 41. Setting items TV Aspect Sets the picture size according to aspect ratio of the connected TV. HDMI Video Resolution Sets the HDMI video resolution. HDMI Deep Color Sets whether to output the picture from HDMI OUT jack with Deep Color or not.
FUNCTION SETUP Setting items Progressive Mode Sets the optimum progressive mode for the image material output from HDMI OUT jack and VIDEO OUTPUT (COMPONENT) jacks. Depending on the video material, image quality may get degraded due to the wrong Progressive Mode setting. In such case, change the setting. Still Mode*1 Adjusts picture resolution and quality in still mode. Options Auto*: The progressive mode will detect 24-frame film material (movies) and automatically select appropriate progressive mode.
FUNCTION SETUP ■ Audio Audio BD Audio Mode HD Audio Output HDMI Audio Out HDMI Multi (Normal) Down Sampling Off DRC Auto • For how to select the setting items and options, refer to “Custom” on page 41. Setting items BD Audio Mode For BD, selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio. Refer to “Setting the BD Audio Mode” on page 36. Options HD Audio Output*: Outputs only the primary audio.
FUNCTION SETUP ■ Digital out setting When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks change depending on “Digital Out” setting. Quick HDMI Audio Out Audio Mute Digital Out Bitstream*: When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS® or DTS-HD®, the corresponding core stream (Dolby Digital or DTS®) are output.
FUNCTION SETUP How to navigate through “HDMI Multi(LPCM)”. 1 2 Use [K / L] to select your desired menu item then press [Enter]. Use [K / L] to select your setting items. • Press [Return] to go back to the previous screen. 3 Use [s / B] to select desired options. (Except for “Test Tone”, “Default” and setting options in “Speaker Size” setting.) For setting options in “Speaker Size” setting: Press [Enter] to select desired options.
FUNCTION SETUP Menu Delay Time This is a parameter for optimizing the timing at which the sound is output from the speakers according to their distance from the listening position. Setting items Distance Options Feet* Meters Front 0ft to 60ft (12ft*) (0m to 18m (3.6m*)) 0ft to 60ft (12ft*) (0m to 18m (3.6m*)) 0ft to 60ft (10ft*) (0m to 18m (3.0m*)) 0ft to 60ft (10ft*) (0m to 18m (3.0m*)) Center Surround Surround Back Default Descriptions Set the desired measure system.
FUNCTION SETUP ■ Parental Ratings control allows you to set a limit, which prevents your children from viewing inappropriate materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter a password before playing back the disc. Parental BD Rating Level All DVD Rating Level All Password Change 1 2 Use [K / L] to select , then press [Enter]. Use [the Number buttons] to enter your 4-digit password.
FUNCTION SETUP ■ Others Others Angle Icon On Auto Power Off On Panel Display Auto HDMI CEC On Mode Select Disc Network Connection Enable(Easy) Software Update For how to select the setting items and options, refer to “Custom” on page 41. Setting items Angle Icon 50 Options On*: The angle icon appears on the TV screen when playing back the scene with various angle. Off: The angle icon disappears on the TV screen.
FUNCTION SETUP Setting items Network Connection Options Enable (Custom) Proxy Setting Do Not Use* Use Proxy Address Proxy Port Connection Auto* Speed 10BASE Half 10BASE Full Set the proxy server. In most cases, you can connect to the Internet without using proxy server. Set the connection speed. In most cases, you can connect to the Internet without making any changes to the default setting.
FUNCTION SETUP Enable(Easy) Network Connection Set up the network connection settings in order to use BD-Live, DLNA home media server, Netflix / CinemaNow / Blockbuster feature or network update function. Network settings are set to the following settings initially. (In most cases, you can connect to the Internet without making any changes to the default settings.
FUNCTION SETUP If you select “Manual”, follow the following instruction to set the IP address and DNS. 3-a) Use [K / L] to select “IP Address”, “Subnet Mask” or “Default Gateway”, then press [Enter]. IP address setting screen will appear. Enter IP address, subnet mask and default gateway with cursor buttons and number buttons. 3-d) After you enter all correctly, press [Enter]. • Confirmation message will appear. Select “Yes” to complete the settings.
FUNCTION SETUP 3-a) Use [K / L] to select “Proxy Address”, then press [Enter]. Proxy address setting screen will appear. Enter proxy address. • The keyboard screen will appear. • Connection Speed p You can set connection speed as your preference. (The default setting is “Auto”.) 1 Others 2 Proxy Address _ 3 1 2 3 4 5 a k u b c d e l m n o v w x y z Clear [K / L / s / B] : [the Number buttons] : [Enter] : [A] : [B] : [C] : [D] : All Clear 6 7 8 f g h i j p q r s t .
FUNCTION SETUP 6 Disable Deactivate all the network connection and settings. 1 2 3 Follow steps 1 to 4 in “Connection Test” on page 52. Use [K / L] to select “Disable”, then press [Enter]. Press [Return] to go back to the previous screen, or press [Setup] to exit. • The network connection can be reactivated by setting the network connection to “Enable(Easy)” or “Enable(Custom)”. Software Update Current Version You can confirm the current software version.
FUNCTION SETUP Initialize Initialize the setting, SD Memory Card, network setting or deactivate Netflix. 1 2 3 In stop mode, press [Setup]. Use [K / L] to select [Enter]. , then press Use [K / L] to select a desired option, then press [Enter]. “Setup”: Resets the setup menu to the default. The setting for “Parental”, “Network Connection”and “Mode Select” will not be reset. “Format SD Card” (Available only when an SD Memory Card is inserted.): Initializes the SD Memory Card.
TROUBLESHOOTING If the unit does not perform properly when operated as instructed in this manual, check the unit, consulting the following checklist. Problem No power. No sound or picture. No audio / video signal on the display device via HDMI cable. Distorted picture. Completely distorted picture or black / white picture with BD / DVD. No sound or distorted sound. Picture freezes momentarily during playback. Solution - Check if the AC cord is properly connected.
TROUBLESHOOTING Problem Solution Playback does not start when the - Check the settings in “Parental” menu. title is selected. The password for rating level has - Enter the default password “4737”, then your forgotten password will be cleared. been forgotten. Cannot connect the network. - Check if the LAN cable connection is properly made. - Turn on the modem or broadband router. - Check the network setting. - Check if the broadband router and / or modem is correctly connected. - Check the “BD-Live Setting”.
GLOSSARY Analog g Audio Digital g Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analog-todigital converter, generating a stream of numbers.
GLOSSARY JPEG (Joint Photographic g p Experts p Group) p Router JPEG is a method of compressing still picture files. You can copy JPEG files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, SD Memory Card or DLNA home server from a computer and play back the files on this unit. A networking device which distinguishes the IP address assigned to each device and routing and forwarding information in the computer network.
LANGUAGE CODE Language A-B Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian [BUL] Burmese Byelorussian C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech [CZE] Danish [DAN] Dutch [DUT] English [ENG] Esperanto Estonian F-H Faroese Fiji Finnish [FIN] Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5
SPECIFICATIONS General Signal system Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating g humidityy NTSC color 120V AC, 60Hz 20W (standby: 0.6W) 17-1/8 x 4-1/4 x 12-3/16 inches (435 x 108 x 309mm) 10.9 lbs ( 4.
NETWORK SERVICE DISCLAIMER Network Service Disclaimer Content and services made available through this product are transmitted by third parties by means of networks and transmission facilities over which Company has no control and third party services may be terminated or interrupted at any time, and Company makes no representation or warranty that any content or service will remain available for any period of time.
Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8163 En Printed in China E5SF1UD / 1VMN29753 ★★★★★ SN 29400492 (C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved. E5SF1UD_DBS30.2_EN_v1.