Owner's Manual

Getting Started

—Continued

Option 2: 7.1/5.1-Channel Analog Audio Connection

Use a multichannel analog audio cable or several normal audio cables (one included) to connect the

NVS-7.7’s FRONT L/R, SURROUND L/R, SURR BACK L/R, CENTER, and SUBWOOFER jacks

to the 7.1-channel analog audio input on your AV receiver.

Option 3: VLSC 2-Channel Analog Connection

The NVS-7.7’s onboard VLSC Vector Linear Shaping Circuitry has its own dedicated 2-channel ana-

log audio output. Use this connection when you want to listen to 2-channel analog audio with the very

best sound quality. Use the supplied audio cable to connect the NVS-7.7’s ANALOG 2 CH AUDIO

OUT L/R jacks to an analog audio input on your AV receiver or TV.

Note:

With this connection, the volume level is controlled on the AV receiver.

7.1CH AUDIO IN

SURROUNDSURR BACK

FRONT

CENTERSUB

WOOFER

LRLR

AV receiver

• 7.1-channel connection

5.1CH AUDIO IN

SURROUND

FRONT

CENTERSUB

WOOFER

AV receiver

• 5.1-channel connection

For a 5.1-channel connection, use the FRONT L/R, SURROUND L/R, CENTER, and SUB-

WOOFER jacks.

Note: With this connection, the volume level is controlled by the NVS-7.7 and AV receiver.

You must change a setting

to use this connection (see

page 39).

AUDIO INPUT

AV receiver

TV/monitor

NVS-7.7 Hard.book Page 31 Monday, April 17, 2006 9:56 AM