Integral P Series 2 SATA 2.5” MLC SSD Technical Datasheet Features: SATA 2.6 Compliant, 3Gb/s support and 1.5Gb/s support ATA modes supported - PIO modes 3 and 4 - Multiword DMA modes 0, 1, 2 - Ultra DMA modes 0, 1, 2, 3, 4, 5, 6 Industry-standard, 512-byte sector size support Hot-plug capable Ultra-efficient Block Management & Wear Leveling Intelligent “Recycling” for advanced free space management RoHS-compliant package S.M.A.R.T.
Integral P Series 2 SATA 2.5” MLC SSD Technical Datasheet Dimensions 4 – M3x0.5-6H Mounting Holes MIN Full Thread 3 mm 61.72 mm. 76.6 mm. 100 mm. 14 mm. 4 – M3x0.5-6H Mounting Holes MIN Full Thread 3 mm 9.5 mm. 3 mm. 76.6 mm. Figure 1 Integral P Series 2 SATA 2.5" SSD Housing 3 14 mm.
Integral P Series 2 SATA 2.5” MLC SSD Technical Datasheet Architecture Integral’s solid state drive (SSD) employs a single-chip controller with a SATA interface on the system side and up to 16-channels of NAND Flash internally.
Integral P Series 2 SATA 2.
Integral P Series 2 SATA 2.5” MLC SSD Technical Datasheet Interface Connectors Integral SSD uses the industry standard 2.5” SATA connector as defined by SATA-IO. The pin-out of the signal segment is shown in Table 4 and the pin-out of the power segment is shown in Table 5.
Integral P Series 2 SATA 2.
Integral P Series 2 SATA 2.5” MLC SSD Technical Datasheet WRITE DMA FUA EXT WRITE DMA (without retries) WRITE FPDMA QUEUED WRITE LOG DMA EXT WRITE LOG EXT WRITE MULTIPLE WRITE MULTIPLE EXT WRITE MULTIPLE FUA EXT WRITE SECTORS WRITE SECTORS EXT WRITE SECTORS (without retry) 0x3D 0xCB 0x61 0x57 0x3F 0xC5 0x39 0xCE 0x30 0x34 0x31 Smart Attributes Table 7 S.M.A.R.
Integral P Series 2 SATA 2.5” MLC SSD Technical Datasheet Reliability Integral SSDs incorporate advanced technology for defect and error management. The Controller uses various combinations of redundant storage elements, hardware-based error correction algorithms and firmware-based static and dynamic wear-leveling algorithms. Over the life of the SSD, uncorrectable errors may occur.
Integral P Series 2 SATA 2.5” MLC SSD Technical Datasheet Preventive Maintenance Not Applicable. No preventative maintenance is required. Unauthorized maintenance to the SSD will void the warranty. Endurance The endurance is a function of the PE cycles of the flash devices used, the Write Amplification (WA) of the controller and the usage model of the application.
Integral P Series 2 SATA 2.
