User's Manual

User Manual
©
2019
Integrated Device Technology, Inc
.
60
December 4, 2019
7.2 Pressing the Back Button before the Bind was Successful
7.2.1 During the Provisioning phase
1. If the back button is pressed before the “Key Bind Success” message was given and while the “Provisioning” message is seen.
The BTG25 will not be connected to the app and the BTG25 will need to be connected again.
2. On the “BLE Sensor Hub” menu press the plus symbol (+) in the upper right hand corner. This will trigger a search for available
tags in the area.