User's Manual

19
To adjust key tone:
Adjusting the key tone allows you to change the sound the key makes when touched.
1. Go to Phone Setup menu > Key Tone.
2. Use
or to select key tone. (Select ‘OFF’ to silence the key tone)
3. Touch
to confirm.
ASSIGNING A NAME TO A HANDSET
1. Touch
and select the Phone Setup menu > Handset Name.
2. Use the 0 – 9 keys to enter a name. Press the appropriate digit key as many times as
necessary to enter the first letter of the name. The cursor will move to the right and the
next letter can be entered after about 1 second or if another key is pressed. Spaces can
be added by pressing the number 1 key. (For additional information on entering text, see
the section in this manual titled USING HANDSET KEYS TO ENTER TEXT on Page XX).
3. Touch
to confirm.
HANDSET RECEPTION
The range of your handset is 300 meters (984 feet) from the base unit. Interference from
other electrical appliances such as a TV, microwave or computer should be avoided. If you
are out of range or the signal is interrupted
will disappear and ‘OUT OF RANGE’ will be
displayed.
NOTE Due to radio interference, occasional loss of synchronization between the handset
and base unit may occur. If this happens, the base unit will very quickly switch to another
channel and automatically restore synchronization.
RESET
To reset the handset to the default setting:
1. Touch
and select the Set Default menu.
2. Use
or to select ‘YES’.
3. Touch
to confirm.
Note Resetting the handset will not delete Caller ID, Redial, Phonebook or Vmail data.
DEFAULT SETTINGS
SETTING DEFAULT VALUE
Language English
Intercom & External Ring Volume 3
External Ring Tone Ring Tone 3
Intercom Ring Tone Tone 1
Alarm Off
Alarm time 12:00 AM
Display format 12-hour
Month-Date display format MM / DD
Key Click Tone Pattern 3
Smart Key Lock On
Auto Answer Off
Dial Mode Tone Dial
Handset Name Clear
Backlight Time 60s
Room monitor OFF