User's Manual

and a second press of the key will be required to terminate the call.

• When dialing digits, hold the handset away from the LCD area as shown below.

Touching the LCD display may trigger the automatic keypad lock sensor and prevent you

from dialing. If the keypad lock sensor is triggered, a small key will appear in the top left

corner of the display.

GETTING STARTED

CONNECTING BASE UNIT AC ADAPTER AND PHONE LINE

Plug the power adapter and phone line into the appropriate wall outlets, which should be

easily accessible and near the equipment. Connect the AC adapter and phone line to the

base unit.

HANDSET BATTERY PACK

The handset uses 1 x NiMH 650 mAh 3.6V (AAA) rechargeable battery pack. Before using

the handset, you must first remove the battery protection insert.