User's Manual
21
Chain dialing from the directory
Use this feature to make calls that require a sequence of numbers such as
using a calling card for a frequently called long distance number. You can dial
each part of the sequence from a different entry of the directory. The following
example shows how you can use chain dialing to make a call through a long
distance service:
The Number for: Memory Location
Long distance access number 7
Authorization code 8
Frequently called long distance number 9
1. Make sure the phone is in TALK mode.
2. Press
MEM and then press 7.
3. When you hear the access tone, press
MEM and then press 8.
4. At the next access tone, press
MEM and then 9.
Tip: Wait for the access tones before pressing the next memory key, or your
call might not go through.
The digital answering machine has three mailboxes with up to 15 minutes
recording time and can store up to 50 messages. All recordings can be up to one
minute long.
Switch the answering machine on/off
1. Press ANS to display the current setting. The voice prompt will announce
“Answering machine is on / off” and
/ is displayed.
2. Press ANS to toggle the answering machine on/off. The voice prompt and
display will conrm the status.
Note:
• The unit automatically returns to standby mode when no input is made.
• If there are any messages in the mailboxes, the number of messages will be
displayed.
DIGITAL ANSWERING MACHINE
Play the messages from the mailboxes
The digital answering machine can record messages in three separate
mailboxes. Memo notes can also be recorded in the mailboxes.
manual-en-pm5851-re1.indd 21 2006/9/7 19:02:20