User's Manual

40
CONSUMER INFORMATION
This equipment complies with Part
68 of the FCC rules and the require-
ments adopted by the ACTA. On the
bottom of this equipment is a label
that contains, among other informa-
tion, a product identier in the format
US: KT5W400BPM58XX. If request-
ed, this number must be provided to
the telephone company.
An applicable certication jack
Universal Service Order Codes
(USOC) for the equipment is pro-
vided (i.e., RJ11C) in the packaging
with each piece of approved terminal
equipment.
A plug and jack used to connect this
equipment to the premises’ wiring
and telephone network must comply
with the applicable FCC Part 68 rules
and requirements adopted by the
ACTA. A compliant telephone cord
and modular plug is provided with this
product. It is designed to connect to a
compatible modular jack that is also
compliant. See installation instruc-
tions for details.
The REN is used to determine the
number of devices that may be con-
nected to a telephone line. Excessive
RENs on a telephone line may result
in the device not ringing in response
to an incoming call. In most but not
all areas, the sum of RENs should
not exceed ve (5.0). To be certain of
the number of devices that may be
connected to a line, as determined
by the total RENs, contact the local
telephone company. [For products
approved after July 23, 2001, the
REN for this product is part of the
product identier that has the format
US:KT5W400BPM58XX. The digits
re-presented by 0.0B are the REN
without a decimal point (e.g., 03 is
a REN of 0.3). For earlier products,
the REN is separately shown on the
label].
If this equipment PM5851causes
harm to the telephone network, the
telephone company will notify you in
advance that temporary discontinu-
ance of service may be required. But
if advance notice isn’t practical, the
telephone company will notify the
customer as soon as possible. Also,
you will be advised of your right to
le a complaint with the FCC if you
believe it is necessary.
The telephone company may make
changes in its facilities, equipment,
operations or procedures that could
affect the operation of this equip-
ment. If this happens the telephone
company will provide advance notice
in order for you to make necessary
modications to maintain uninter-
rupted service.
Should you experience trouble with
this equipment, please contact:
www.phonemate.com
Minneapolis Service Center
10901 Louisiana Ave. So.
Bloomington, MN
USA
55438
for repair or warranty information. If
the equipment is causing harm to the
telephone network, the telephone
company may request that you
disconnect the equipment until the
problem is resolved.
manual-en-pm5851-re1.indd 40 2006/9/7 19:02:26