User's Manual
Connector Assignments
PXOO7BZ/HX
PXOO7AZ
PXOO7Z/MF
PXOO7Z/MFSNR
PXOO7Z/ICSNR
1 <;::J Red LED input
2 <;::J Green LED input
3 q Data / D1
4 q Clock / DO
5 <;::J Buzzer input
6 NC
7 <;::J Ground
8 <;::JPower
PXOO7BZ/HX/RS232
PXOO7Z/MF/RS232
PXOO7Z/MFSNR/RS232
PXOO7Z/ICSN R/RS232
1 <:::J Red LED input
2 <:::J Green LED input i
3 q RS232 RTS (optiona~)
4 q RS232 TXD
5 <:::J RS232 CTS (optionaO
6 <:::J RS232 RXD
7 <:::J Ground
8 <:::J Power
PXOO7BZ/HX/RS422
PXOO7Z/MF/RS422
PXOO7Z/MFSNR/RS422
PXOO7Z/ICSNR/RS422
1 ? Red LED input
2 ? Green LED input
3 c::> RS422 TXB
4 c::> RS422 TXA
5 ? RS422 RXB
6 ? RS422 RXA
7 ? Ground
8 ?Power
Parts List
1) PXO07 Reader 4.75-12.25 VDC qty 1
2) Terminal Connector 8 pins qty 1
3) Mounting sticker qty 2
4) Installation sheet qty 1
5) K25 spacer plate (optional) qty 1
6) Cable, 8 x 0.35 conductor as required
Installation instruction
1) Determine an appropriate position for the
Reader and drill two holes for mounting the
reader to the surface (see diagram). Make sure
that enough room to connect the cable is
allowed. Protect the cable against sharp edges
and any damage from chaffing.
2) Remove the Terminal Connector 8 pins from the
back of the Reader. Use a small flat head
screwdriver to loosen off all of the terminals.
The end of the cable should be prepared by
cutting it back to expose the wires and each end
should be twisted to eliminate any loose or
frayed wires.
3) The wires should then be connected to the
Reader inline with the Connector Assignments.
4) After wiring the reader and the Host system the
Reader is ready to be tested. Apply power and
present a Card to the Reader. The red LED
should flash and the buzzer should beep
indicating a read. If the Host system is
connected to the red and green LED inputs
these should follow the functionality of the Host
system.
5) The Reader should now be secured to the
surface using the appropriate fasteners and the
stickers should be applied to cover the
mounting holes.
Mullion Mounting
Integrated Engineering
Amsterdam
The Netherlands
Telephone: +31 204620755
Fax: +31 204620756
Email: info@ieprox.co$}
WWW: http://www.iepr~x.com
Ref: V1.2, 20/11/2000