User's Manual

5
Features
The Smart ID Reader has a slim door style mountable
design to match any decor. The buried LED’s and
buzzer allow the Smart ID Readers to be mounted
indoors and outdoors.
The Smart ID Reader accepts 4 to 16 Volts DC. The
output formats like clock-and-data magstripe (ABA /
ISO7811), Wiegand and a number of other formats are
determined by the personalization of the card or
configuration of the reader. The 5 Volt DC capability
allows the replacement of older reader systems
without rewiring or pulling new cables. The Smart ID
Reader offers high reliability, consistent read
characteristics and low power consumption.
Within the Smart ID Proximity Reader Family also
models with a RS232/RS422/RS485 interface are
available for read-only and read/write operations.
The Smart ID Reader Family supports both the 125KHz
and 13.56MHz technologies. Different models are
available for EM4002, EM4050, HiTAG1 and 2, Mifare,
DESFire and I·Code technology. Standard capabilities
include Host system controlled red and green LED’s
and a buzzer.
The Smart ID Reader can be mounted on any surface
without relevant performance degradation. For
mounting on a metal wall a spacer is advised.
Our commitment is to bring non-propriety, open Radio
Frequent Identification (RFID) systems to the market
demonstrated with the Smart ID Reader Family.